Check if you wish to remove the blank page and move the slider to the
left or right to your desired threshold.
Check White or Black if you wish to add white or black edge on the border of
your scanned image. Enter the value from 0 to 5 mm. Default value is 0.
You can remove punch holes from the output scanned image when scanning
punched document. Note the availability of this feature varies depending on your
scanner model.
Punch holes can not be removed when:
Resolution is set lower than 150dpi
The hole is near the edge of the document
The holes are not aligned along the edge of the document
Punch Hole Removal is available only when “Auto Crop” is enabled. If either
“Fixed to Transport”, “EOP (End of Page) Detection”, “Automatic Multiple”,
“Relative to Documents” is selected from the Cropping option on the Paper tab,
the Punch Hole Removal option will be disabled.
