THE BOX THE WHITE LINE
7
DAB Mode
When you turn on the radio it will automatically
search and store all the available stations. You
should conduct an additional Full Scan to ensure all
stations are picked up and stored. It is also
recommended every few months to run a new scan
to pick up any new DAB/DAB+ that may have begun
broadcasting after purchasing your DAB radio.
1. For initial use, your radio will conduct a full scan
and store stations list in memory.
2. Once the scanning is completed, the
DAB/DAB+ stations will be displayed in
alphanumeric order. The first station in the list
will be selected.
Note:
" The DAB/DAB+ stations will be displayed and
stored in alphanumeric order.
" If no DAB/DAB+ signal is found, it may be
necessary for you to relocate your radio.
Display
This feature enables you to select the station
information which shows on the display.
1. Press and hold button, and then press
or buttons to select Display, press
button to confirm.
2. Press or buttons to browse through
Scrolling text, Signal strength, Program Type,
Ensemble, Frequency, Signal quality, Bitrate
and Codec, Format, Time and Date, and then
press button to confirm your selection.
Showing Signal Strength
While you selected Signal strength, a signal bar with
the strength of the current station will show on the
display.
The indicator on the signal bar shows the minimum
acceptable signal level.
Note:
Stations with signal strength below the minimum
signal level may not provide a steady stream of
audio.
Station List
This feature enables you to select a station from
available station list.
1. Press and hold button, and then press
or buttons to select Station list, press
button to confirm.
2. Alternatively, while a program is playing, press
or buttons to show station list.
3. Press or buttons to browse stations list,
and then press button to confirm. The
selected station will be broadcast.
Secondary Service
You may see a “>>” symbol after the name of the
station, this indicates that there are secondary
services available to that station. These secondary
services contain extra services that are related to the
primary station. E.g. a sports station may want to
add extra commentaries. The secondary services
are inserted directly after the primary station (a “<<”
symbol is before the name of the station) in the
station list.
To select the secondary station, press or
buttons until you find the secondary service you want,
then press button to select it.
When the secondary service ends, the unit will
automatically switch back to the primary station.
Full Scan
This feature enables your radio to scan for all
available stations.
Press and hold button, and then press or
buttons to select Full scan, press button to
confirm.
