Chapter 4 – Using the Control Panel
13
timer status eld
start time
stop time
4.4.3 Setting the Auto Timer
The Auto Timer Menu allows the setting of a Timer ON period, which is dened by
a START time and a STOP time. For the Timer ON period, a fan speed can be
selected in the Timer ON Fan Speed Menu (see 4.4.5). The time outside the Timer
ON period is dened as the Timer OFF period for which the air cleaner can be
switched off or for which a different fan speed can be selected in the Timer OFF
Fan Speed Menu (see 4.4.5).
The timer status eld indicates whether the timer function is enabled or disabled
(on or off). Use the time status field to quickly enable/disable the timer, e.g. for
holiday.
1. To reach the Auto Timer Menu from the main display window, press the Menu
key twice.
2. Press and hold the Enter key until the cursor starts to ash.
3. Press the p key one time to activate the timer.
Note: If the START and STOP times are identical, the timer cannot be ac tivated.
Note: The time is displayed in a 24 hrs. clock, military time.
4. Press the Enter key to save the timer status setting and to proceed to the
START time.
5. Select the desired START hour by pressing the p key.
6. Press the Enter key to save the START hour and to proceed to the minute
setting.
7. Select the desired START minute setting by pressing the p key.
Note: The minute settings can only be set in ve minute increments.
8. Press the Enter key to save the minute setting, save the START time and to
proceed to the STOP time setting.
9. Select the desired STOP hour by pressing the p key.
10. Press the Enter key to save the STOP hour and to proceed to the minute
setting.
11. Select the desired STOP minute setting by pressing the p key.
12. Press the Enter key to save the STOP minute setting, save the STOP time and
to exit the enter mode.
Note: The times are displayed in a 24-hour clock.
