695116
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
iBN27 EN-IB (of CR8630)-running change
Size: 214mm x 336mm
Printing color: Black
Mar 03, 2014
100gsm2 WF (書紙)
*Audio Cable
Unit doesn’t respond (no power)
• Make sure unit is completely charged.
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBN27.
• Make sure the Power ON/OFF Switch is not in the OFF (left) position.
• If the unit cannot be charged up, please remove the aux-in cable from the unit and
slide the Power ON/OFF Switch to OFF position before charging.
Resetting the Unit
• If the unit is “frozen” or locks up, you may wish to reset it. To do so, turn the unit ON and press the end
of paper clip or similar into the reset port on the back of the unit for less than 2 seconds to reset it without
clearing Bluetooth settings. The unit will reset and power back on. (If pressed for longer than 2 seconds,
the unit will reset but will not power back on.)
• To reset Bluetooth settings, turn unit ON then press and hold the Bluetooth Pairing Button on the back
of the unit for 8 seconds. The light will flash red rapidly and a tone will sound. You will then need to
re-pair any previously linked devices.
Trouble pairing device/computer with iBN27
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing
and linking.
For further information and to see the latest instructions, visit www.ihome.com/support
9
Troubleshooting
7
Using Bluetooth: Pairing Your Device (cont’d)
“iHome iBN27” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar
message appears, tap on “iHome iBN27“ to complete pairing. If your device asks for a password, enter
1234 on the keyboard of your device. If no device is paired within 2 minutes, the unit will revert to auto
link mode. To retry pairing, press and hold the Bluetooth Pairing Button again.
Playing Audio Via Bluetooth
1. Move the Power ON/OFF Switch to the ON position (right) to listen to audio streamed wirelessly from
your paired iPad, iPhone, iPod or other Bluetooth device.
The blue light will flash as the unit searches for a previously paired device, and then turn solid blue once
a previously paired device is detected.
2. Use the controls on your device to play or pause audio, navigate tracks and control volume from your
Bluetooth device.
3. When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit off.
NOTE: Aux-in audio is disabled when Bluetooth audio is playing from a different device.
Playing Audio via Aux In
1. Connect the included 3.5 mm audio cable plug to the headphone or line-out jack on your audio device
and the other end into the Aux-in Jack on the back of the unit.
2. Move the Power ON/OFF Switch to the ON position (right) to listen to audio via aux in. The indicator
light will flash blue.
3. Power on the audio device and use the controls on the device to play or pause audio, navigate tracks
and control volume. If your audio device is already paired with the unit, the light will glow steadily blue
as in Bluetooth mode, but you will hear your audio via aux-in.
4. When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit off.
Remember to turn off your audio device, too.
8
Playing Audio via Aux Out
You can connect the unit to an external speaker via the Aux-out jack located on the back of the unit to
expand the audio playing in Bluetooth or Aux-In modes.
1. Connect a 3.5 mm audio cable plug to the Aux- out jack on back of the unit and connect the other
end to the line-in jack on your external speaker.
2. Move the Power ON/OFF Switch to the ON position (right).
3. Power on a Bluetooth or aux-in audio device and use the controls on the device to play or pause audio,
navigate tracks and control volume.
4. When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit off.
Remember to turn off your audio device, too.
Playing Audio From a Computer via USB
The included micro USB to standard USB cable lets you play audio from a USB port on a Mac or PC while
charging the iBN27.
1. Connect the micro USB plug to the micro USB charging/audio port on the back of the unit.
2. Connect the standard USB plug end of the cable to a USB port on your computer. Below are typical
setup steps for PC & Mac.
Setting up on a PC:
The iBN27 should automatically load required audio drivers onto your PC when connected via USB.
Under Control Panel>Sound, select “iHome iBN27” and click on “Set Default”.
Setting up on a Mac (OSX):
Open System Preferences>Hardware>Sound, click on the Output tab, then select “iHome iBN27”.
3. Use the audio controls on your computer to play or pause audio, navigate tracks and control volume.
Note: while connected via USB with iBN27 selected as the audio output source, audio will play
through the IBN27 whether it is turned ON or OFF.
4. When finished listening, stop play in your computer and disconnect the USB cable from the iBN27 OR
unselect iBN27 as an audio output source in your computer.
6
Using Bluetooth: Pairing Your Device Manually
For First Time use (auto pairing):
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user
manual.
2. Move the Power ON/OFF Switch on the unit to the ON position (right). The first time the unit is
turned on it will enter auto pairing mode, indicated by a rapidly flashing blue light.
NOTE: In any
mode (auto link, pairing, Bluetooth or Aux audio) if the unit is connected to charging source, the
indicator light will be red instead of blue.
“iHome iBN27” should appear on your device’s menu. If
“Not Paired”, “Not Connected” or similar message appears, tap on “iHome iBN27“ to complete
pairing. If your device asks for a password, enter 1234 on the keyboard of your device.
3.
Once paired with a device, the blue light will glow steadily. There should be an indication on your
device that pairing is complete (”Connected” or similar). On some devices, you must then select “Use as
Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device should auto-link to
the iBN27 whenever within range (about 30 feet).
If auto pairing did not work, press and hold the
Bluetooth Pairing Button located on the back of the unit for 2 seconds to retry pairing.
Once the Unit Has Paired with A Device (auto linking):
1. When the unit has been paired with a device, the next time it is powered on, the unit will turn on in
auto link mode and attempt to auto link to a previously paired device, indicated by a slowly flashing
blue light. If a linked device is found, the indicator will glow solid blue.
2. If no linked device is found, the blue light will continue to flash slowly. Press and hold the Bluetooth
Pairing Button located on the back of the unit for 2 seconds. The unit will enter pairing mode, 2 short
beeps will sound and the light will flash blue rapidly while the unit attempts to pair.
2
iBN27 System
USB charging/audio cable Audio cable
Included
• iBN27 system
Micro USB to USB charging/audio cable
3.5mm stereo audio cable
3
Meet Your iBN27
Power/Charging/Pairing
Indicator Light
Back
Front
Charging the Unit
1. Connect the micro USB plug to the micro USB charging/audio port on the back of the unit.
2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB
charging device. For first time use, charge unit for about 3 hours.
3. A red light glows steadily while the unit is charging and turns OFF once the unit is fully charged. If unit
is not powered on when micro USB plug is connected, the red light glows steadily to indicate unit is
charging. For best sound performance, only operate the unit when fully charged.
4
NOTE: When unit is on and not connected to power source, the red light will slowly flash for a
short time (10 times each minute) to indicate the battery needs charging.
NFC Antenna area
Top
5
Using Bluetooth: Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Manually”.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability
(typically under Settings) as described in the device’s user manual.
2. Place your NFC–enabled device in play mode.
3. Move the iBN27’s Power ON/OFF Switch to the ON position.
4. Touch the area of your playing NFC device
against the antenna area on top of the unit. The unit will
enter automatic pairing mode, tones will sound and the light will flash blue while the unit attempts to
pair. If prompted, accept Bluetooth pairing. “iHome iBN27” should appear on your device’s menu.
Once paired with a device, the blue indicator light will glow steadily, a confirmation tone will sound
and your music will play through the unit.
5.
Use the controls on your device to play or pause audio, navigate tracks and adjust volume.
6. When done listening, move the Power ON/OFF Switch to OFF position to turn the unit OFF.
Remember to turn off your audio device, too.
NOTE: To unlink your device, simply touch it again on the antenna area on top of the unit. Similarly,
to switch between music playing from two paired NFC devices, touch the area of the desired
device to the antenna area on top of the unit.
To pair a device manually, please see the following “Pairing Your Device Manually” section.
Charge via computer USB port, USB AC adaptor or other powered USB port
Computer connected
to working outlet
iHome iBN27 USB port
Computer USB port
Power On/Off Switch
Bluetooth Pairing Button
Aux-in Jack
Reset port
Aux-out Jack
Micro USB Charging/Audio Port
aux-in pairingo | onpower in speaker out
reset
aux-in o | onpower in
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw IHome iBN27 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van IHome iBN27 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info