675868
11
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
11
ENGLISH
Setting Applications
I
Cooling the hot parts
Cooling the machine before
changing the nozzle
II
Drying paint and varnish
Removing stickers
Waxing and de-waxing
Drying wet timber prior to filling
Shrinking PVC wrapping and
insulation tubes
Thawing frozen pipes
III
Welding plastics
Bending plastic pipes and sheets
Loosening rusted or tightly fastened
nuts and bolts
Removing paint and lacquer
Soldering plumbing joints
Use of the correct nozzle
Nozzles could be used with the heat gun for
different applications.
Reduction nozzle (5)
Welding, shrink sleeving (heat
concentrated over small area).
Fishtail nozzle (6)
Drying, thawing (heat spread over
wider area).
Glass protection nozzle (7)
Protection windows when stripping
frames.
Reflector nozzle (8)
Soldering pipes.
Make sure that the tool is switched off
and the nozzle has cooled down.
Falling down nozzle can set an object
on fire. Nozzles must be mounted
firmly and secure on the unit.
Touching a hot nozzle can lead to
serious burns .Before attaching or
replacing a nozzle, allow the unit to
cool down completely or use a suitable
tool.
A hot nozzle can set a surface on fire.
Place down hot nozzles only on
fire-proof surfaces.
An incorrect or defective nozzle can
lead to heat accumulation and damage
the unit.
Stationary use
This tool can also be used in stationary mode.
Place the tool onto the workbench.
Secure the cable to prevent pulling the tool off
the workbench.
Carefully switch the tool on.
Make sure that the nozzle always
points away from you and any
bystanders. Make sure not to drop
anything into the nozzle.
Troubleshooting
In case the hot air gun does not work well, we
give you subjoined some possible causes and
their solutions.
The engine gets overheated
The ventilation slots of the hot air gun are dirty.
Clean the ventilation slots.
The hot air gun does not start when it is
witched on
Interruption in the electrical circuit.
Check the mains lead and the mains plug.
The switch is defective.
Pull the mains lead out of the wall socket,
because there is a chance of fire risk ! Have the
hot air gun repaired at your local dealer.
The engine does not work, but it does heat
Interruption in the electrical circuit.
Pull the mains lead out of the wall socket,
because there is a chance of fire risk ! Have the
hot air gun repaired at your local dealer.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hyundai 56552 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hyundai 56552 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info