813010
8
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
17.01.2019 / 53-1102
www.hwam.com
User Manual
HWAM® SmartControl Generation 2
Wi-Fi Frequency: 2.4 GHz.
EN
2
Installation instructions 3
Introduction to HWAM® SmartControlTM 3
Before using HWAM® SmartControlTM 3
First setup 4
Connecting to Wi-Fi networks 6
Operating instructions IHS SmartControlTM app* 7
Startup - app 7
Home screen / front 7
Night reduction 8
Phase indication 8
Stoking time 10
Flue gas temperature, room temperature, temperature level 10
Home Screen - Live data 11
IHS SmartControlTM - messages 12
IHS SmartControlTM - menu 13
Alarms & Warnings 16
Room temperature sensor 17
Pairing of the room temperature sensor with HWAM® SmartControl™ 18
Changing the batteries of the room temperature sensor 19
Firing process 20
Specifications for HWAM® SmartControlTM generation  23
*The app for HWAM® SmartControlTM is called IHS SmartControlTM (IHS = Intelligent Heat System).
CONTENTS
3
App Store: Google Play Store:
The following sections will provide an introduction to the HWAM® SmartControl™ app named
IHS SmartControl™ and the associated wireless room temperature sensor, and how they
operate.
HWAM® SmartControl™ provides a number of advantages:
• It’s the most environmentally friendly way to heat the stove
• Saves up to  percent of the cost of the firewood
• Provides an even temperature in the room
• Makes it easy to fire
• Optional night-time lowering where the fire attenuates and the heat emanates
from the embers in an environmental way
• Signals when new wood is required
INSTALLATION INSTRUCTIONS
Before using the stove, it is important that the following steps are taken:
1
Make sure there is no power connected to HWAM® SmartStove™.
2 Put  of the  AA batteries in the room temperature sensor. Press the button on the front
of the room temperature sensor while the third battery is being placed inside, and hold
until the LED flashes green signalling that it is ready to be paired with the stove. See also
the section on the pairing of the room temperature sensor with HWAM® SmartControlTM on
page . Do not use rechargeable batteries.
3 Plug in the HWAM® SmartStove™ immediately using the power supply.
4 Allow the system to boot up for the first time, this takes about  minute. The green diode
on the room temperature sensor will briefly turn solid green and then turn o when the
room temperature sensor has automatically been successfully paired with the stove.
5 The HWAM® SmartControl™ can be used with a smartphone or tablet that uses the operat-
ing system iOS or Android. To download the app search for IHS Smart Control™ In the App
Store or Google Play Store or scan the QR code below.
Introduction to HWAM® SmartControlTM
Before using HWAM® SmartControlTM
4
Wi-Fi Direct
Wi-Fi network
Setup
You can set up HWAM® SmartControl™ via the IHS
SmartControl™ app and you can only do this using an
iPhone, iPad or Android device.
PCs or MACs cannot be used to setup the system.
Information about the Wi-Fi connection
HWAM® SmartControl™ can be configured to commu-
nicate directly with mobile devices or through a Wi-Fi
network.
It is best to connect a Wi-Fi network as this is the most
advantageous and the most user-friendly use of the
system.
HWAM® SmartControl™ supports  stoves on the same
network.
1-2 units
up to 5 units
Introduction
The following sections describe how the HWAM® SmartControl™ is connected to a Wi-Fi net-
work or via Wi-Fi Direct.
It is always best to connect the system to a Wi-Fi network, as this ensures the best connec-
tion to the system and the simplest operation. It is not necessary to connect to the Internet in
order to use HWAM® SmartControl™ or HWAM® SmartStove™ on a wireless network.
First Setup
5
2
3
1
1
2
2
1
Connection icons
1
No connection (red Wi-Fi icon)
2 Wi-Wi-Fi Direct connection (green Wi-Fi icon)
3 Connected through the network (green Wi-Fi icon
with a tick)
HWAM® SmartControl™ can be used by directly connec-
ting the device and HWAM® SmartControl™, also called
Wi-Fi Direct, displayed by a green symbol. HWAM®
SmartControl™ can also be configured to connect
through a Wi-Fi network, which is recommended. This
connection is indicated by a green symbol with a tick.
Setting up a Wi-Fi connection
The following sections describe how HWAM® Smart-
Control™ is connected to a Wi-Fi network for the first
time. To set up HWAM® SmartControl™, it is necessary to
connect via Wi-Fi Direct first, and then connect HWAM®
SmartControl™ to a Wi-Fi network.
Connecting to Wi-Fi Direct on iPhone
Go to "Settings" on your phone and then select "Wi-Fi" 1.
Make sure that the device has Wi-Fi turned on and
that power is connected to HWAM® SmartControl™ (the
stove). There will now be a Wi-Fi device available called
"IHS STOVE_XXXXX" 2. Connect to this. If you do not
wish to connect HWAM® SmartControl™ to a network,
the system is now ready for use.
Connecting to Wi-Fi Direct on Android
Go to “Settings” on your phone and then select “Wi-Fi” 1.
Make sure that the device has Wi-Fi turned on and
that power is connected to HWAM® SmartControl™ (the
stove). There will now be a Wi-Fi device available called
"IHS STOVE_XXXXX" 2. Connect to this. If you do not
wish to connect HWAM® SmartControl™ to a network,
the system is now ready for use.
NOTE: The number after "STOVE" is unique to each
individual stove.
6
3
1
2
1
2
3
1
Connecting to Wi-Fi networks
After the mobile device is connected via Wi-Fi Direct,
HWAM® SmartControl™ can be connected to a Wi-Fi
network. To connect a Wi-Fi network, press the green
connection icon 1.
If you wish to connect HWAM® SmartControl™ to the
network, click "Yes" 2. This is recommended.
Enter the name of the stove for example: "Living room"
or "First floor." 3
NOTE: The name is used primarily when there are
multiple stoves connected to the same network.
HWAM® SmartControl™ will now search for all available
networks.
Make sure that your network is turned on and accessi-
ble and that your SSID is visible (Service Set Identifier).
NOTE: If there are many available networks, this
can take a while.
Select the network that HWAM® SmartControl™ shall be
connected to 1.
Enter the password for the selected network 2, and
press "Connect to network" 3.
HWAM® SmartControl™ will now try to connect to the
selected network using the code entered.
HWAM® SmartControl™ is now connected to the selec-
ted network. It is no longer possible to access HWAM®
SmartControl™ via Wi-Fi Direct. HWAM® SmartControl™
can only be operated by connecting the mobile device
to the same network as the HWAM® SmartControl™.
If HWAM® SmartControl™ cannot connect to the net-
work, the Wi-Fi Direct connection will automatically
become available again.
NOTE: For servicing the Wi-Fi Direct connection
will be available for one minute after the system has
been restarted.
7
1
2
1
2
3
4
5
7
6
1
8
9
8
3
1
2
The following section comprises the home screen / front page of IHS SmartControl™ app
which describes which features are available and how they are operated.
To use all functions, it is necessary to ensure that the IHS SmartControl™ is connected to
HWAM® SmartControl™ (a stove with HWAM® SmartControl). However, many features are
available without connecting to the system.
The IHS SmartControl™ menu contains a series of menus, all of which will be discussed in the
following sections.
1 App menu
The menu can be found in the top left corner.
2 Connection icon
The connection icon shows when there is a connection
between the HWAM® SmartControl and the stove.
The red icon indicates no connection
The green icon indicates a connection via Wi-Fi Direct
The green icon with a tick signals that the stove has
been connected to the user’s own Wi-Fi network
(home network).
IHS SmartControl™ Main Screen / Front:When the IHS SmartControl™ app is
started, the IHS logo is displayed:
App Menu
Status Icon (Connection)
Stove Name
Night Reduction
Phase Indication
Restoking Timer
Flue Gas Temperature
Room Temperature
Temperature Level
Startup - app
Home screen / Front page
OPERATING INSTRUCTIONS
IHS SMARTCONTROLAPP
8
3
A B
A B
A
3 Stove name
The stove name displays the name of the stove con-
nected to the IHS SmartControl™ app. This is used in the
case where several stoves are connected to the same
network. If the stove has not previously been con-
nected to a network, it will have no name and nothing
will be displayed.
4 Night reduction
A Active (green) B Inactiv (black)
To activate / deactivate the night reduction press the
icon. Night reduction automatically lowers the tempera-
ture setting of the stove, which ensures a longer com-
bustion time with reduced room temperature.
NOTE: Night reduction is only active in the chosen
time period (see the section “Night reduction – time
management”)
.
Night reduction – time management
A Start Time B Stop time
To set the start or stop time for night reduction, press
the icon and hold for  seconds. Press the time and
select the desired time in the dialogue box. At the start
time selected, HWAM® SmartControl™ automatically
goes into night reduction mode to achieve the longest
possible burning. At the same time, the room tempe-
rature function in the HWAM® SmartControl™ is deacti-
vated. At the stop time selected, HWAM® SmartControl™
will automatically return to normal operation and the
previously set temperature level.
NOTE: If the temperature level is changed while the
system is in night reduction mode, night reduction
will be automatically disabled.
5 Phase indication
The phase indicator shows the current combustion
phase of the HWAM® SmartControl™. There are a total
of five phases:
A Start
9
D
C
B
B Lighting up
The phase indicator shows that the system is in
the lighting up phase. The symbol is displayed
after the door has been opened on a cold stove,
or in the case where the standby / start icon of the
IHS SmartControl™ app has been pressed. If the
flue gas temperature does not increase within 
minutes, the HWAM® SmartControl™ will automat-
ically shut o the air supply and return to standby
mode. See the section on correct firing process on
page .
NOTE: To ensure complete combustion e-
ciency it is important to obtain a suciently
high flue gas temperature. Failing this, HWAM®
SmartControl™ emits a restoking alarm, even if
there is unburned wood and flames.
C Combustion
The phase indicator shows that the system is in
the combustion phase and has exited the light-
ing up stage. The system automatically regulates
combustion, ensuring optimum combustion and a
room temperature as close to the desired level as
possible.
D Ember phase
The phase indicator shows that the system is in
ember phase. In this phase there will be mainly
only embers in the stove, and the system will now
also be able to calculate the expected time for the
next restoking (described in a following section).
The system automatically gives an alert regarding
the correct restocking time. It is recommended that
you wait before restoking until the restoke alarm is
emitted, as the expected firewood saving is oth-
erwise not achievable. If there is a big dierence
between actual and desired room temperature,
the restoking alarm comes on, even though there
is unburned wood and flames. Failure to restoke at
this time, will lead to a new restoking alarm being
emitted, which constitutes the last opportunity to
restoke without new lighting up.
NOTE: The best and most economical combus-
tion is achieved by following the recommended
stoking time carefully.
10
E
6
8
9
7
E Standby
The phase indicator shows that the system is in
standby mode. This means that the system has
been in use, and that the temperature in the
stove is now so low that it cannot be guaranteed
that the stove can light new wood. It is therefore
necessary start anew if you want to burn more
wood.
6 Stoking time
The stoking time shows the estimated time to the next
stoking. The stoking time will only be estimated when
the system reaches the ember phase. If there is a big
dierence between actual and desired room tempera-
ture, the restoking alarm comes on, even though there
is unburned wood and flames.
Flue gas temperature
Displays the measured flue gas temperature. The ther-
mal sensor is located at the smoke outlet of the stove.
Room temperature
Displays the temperature measured by the accompa-
nying room temperature sensor. The temperature may
vary by +/-oC in relation to the temperature measured
by another thermometer.
9 Temperature level
The temperature level-setting runs from "Level "
through "Level ". The level can be changed by press-
ing "+" or "-" which regulates the desired temperature
level up or down. The individual levels are explained in
detail in the following sections.
NOTE: Night reduction automatically puts the system
at "Level ". If, however, the level is subsequently
changed, night reduction is disabled.
REMEMBER:
Never leave a stove after igniting a
fire before ensuring that there are
long lasting flames!
7
8
11
Level  (No bar is yellow)
The temperature level is set to "Level ".
HWAM® SmartControl™ runs at the lowest possi-
ble combustion temperature to maintain proper
combustion for the longest period of time possi-
ble, irrespective of the room temperature.
Level - (- bars are yellow)
The temperature level is set to "Level - ". At
these levels the HWAM® SmartControl™ runs
with the purpose of reaching a temperature in
the room that remains as constant as possible,
just like a radiator thermostat. It is recommen-
ded that you set the temperature level to that
which suits you best and refrain from adjusting it
upwards or downwards. HWAM® SmartControl™
is designed so that it automatically increases
combustion, the greater the dierence between
the actual and the desired room temperature.
If there is a big dierence between actual and
desired room temperature, the restoking alarm
comes on, even though there is unburned wood
and flames.
Level  ( bars are yellow)
The temperature level is set to"Level ". At this
level HWAM® SmartControl™ runs with an increa-
sed flue gas temperature and increased room
temperature. This level is intended for situations
where the stove is required to produce much
heat in a short time. It is recommended to not
run at this level for long periods of time.
NOTE: Due to the increased flue gas tempe-
rature and the desire for high room tempe-
rature, much energy is required to maintain
proper combustion. The restoking alarm may
thus be emitted earlier although there are
flames and unburned wood.
Home screen - live data
To see live data the device is rotated.
Live data in IHS SmartControl™ displays information
received from the stove relating to the ongoing
combustion.
NOTE: Live data is refreshed only as long as you are
connected to HWAM® SmartControl™ and the app
is open. Note that the screen rotation in the mobile
device’s settings menu must be activated.
12
2 1
Updating the HWAM® SmartControl™
IHS SmartControl™ is automatically notified when a new
update for HWAM® SmartControl™ is available.
To update your system, select "Yes" 1.
If you do not wish to update, select "No" 2.
Each time the app is opened, it will automatically check
to see if there is an updated version available.
NOTE: It is recommended that you always update
the system to include the last new software, as this
ensures the best functionality of the system. It is not
possible to update the stove if it is more than °C.
IHS SmartControl™ will begin updating the stove. It may
take a few minutes depending on the connection qual-
ity and the size of the update.
After the update is complete, the stove will restart and
will then be refreshed and ready for use.
NOTE: IHS SmartControl will lose the connection
to the system for a short period while the system
reboots.
IHS SmartControlTM - messages
DO NOT TURN OFF THE SYSTEM
WHILE UPDATING!
Do not turn o the power supply to the stove during
the update as it can lead to errors in the system and
cause permanent Airbox failure.
13
1
1
A
2
B
A
A
B
C
1 Menu
The menu is available in the upper left corner of IHS
SmartControl™.
2 Statistics
Statistics show a log with data from the combustion
from around the last  hours.
It is possible to go back and look at the temperature of
the stove during burning, and for how long it was on,
amongst other things.
Press "Download log" A to download the latest log
relating to the stove.
Log information
After the log is downloaded from the stove, it is
possible to select the single combustion cycle
and see the information for that period. A com-
bustion cycle runs from the time when the stove
starts until restoking or standby, or alternatively
from restoking to restoking or standby.
Press the desired combustion cycle A to be
able to see the information relating to this.
Press the "Update log" B to update the data
with the latest combustion information.
Note: Data from the ongoing combustion will
not be available in the log information, but
only in "Live Data".
Under information for each combustion cycle, it
is possible to see the following:
A Flue temperature
B Oxygen level
C Flue gas temperature and oxygen level
The menu of the app IHS SmartControl™ contains a number of menu items oering additional
information and options that are not available from the home screen.
IHS SmartControlTM - menu
14
B
C
D
E
F
A
5
G
B
CD
EF
A
3
A B
4
D
B
C
A
3 Tips
The "Tips" menu contains a number of tips and other
relevant information about the stove and its operation.
The content is updated regularly with new information,
and you are encouraged to look here regularly.
4 Time management
At the start time selected A, the HWAM® SmartCon-
trol™ automatically goes into night reduction mode to
achieve the longest possible burning. At the same time,
the room temperature function in the HWAM® Smart-
Control™ is disabled. When the stop time is reached, B
the HWAM® SmartControl™ will automatically return to
normal operation and the previously chosen tempera-
ture level.
NOTE: If the temperature level is changed while the
system is in night reduction mode, night reduction
will be disabled.
5 Information
In the information menu, some information is displayed and it
is possible to start a self-test:
A Airbox Version: Software version on airbox
B Remote Version: Software version on remote /
room temperature sensor
C Algorithm Version: Current algorithm version on
Airbox
D Valve  Position: Position of damper number 
E Valve  Position: Position of damper number 
F Valve  Position: Position of damper number 
NOTE: Self-test can only be performed when HWAM®
SmartControl™ is idle and the flue gas temperature is
below °C. The system runs an automatic self-test
on a regular basis. The self-test can be actively used,
if there is an error message and you want to check
that the system is now flawless.
6 Settings
It is possible to deactivate the following messages:
A ”Restoking”
B ”Standby”
C Alarms”
D "Restoking alarm room temperature sensor"
Further, it is possible to reset the Wi-Fi settings and
update the HWAM® SmartControl™ with new software
available here. When the app opens, you will automati-
cally be notified if new software is available.
NOTE: Updating the HWAM® SmartControl™ from the
app IHS SmartControl™ does not imply an update of
the app. The app is updated through the App Store
or Google Play Store.
15
A
B
A
A
A
Settings: Wi-Fi
Here you can see to which network the HWAM®
SmartControl™ is connected. To reset this, for
example, if you want to connect to another net-
work, select "Reset Wi-Fi settings" A.
Settings: Update firmware
If a new update is available, this will be shown in
the menu "Update firmware". To update HWAM®
SmartControl™ to the most recent version, press
the button with "Update to V x.x.x" A upon
which, the update starts automatically (see pre-
vious section "Updating the HWAM® SmartCon-
trol™" for instructions to update).
NOTE: When the app is opened, the system
will display a message if there is a newer ver-
sion available.
Update complete √
Settings: Update algorithm
If a new update is available, this will be shown
in the menu “Update algo”. To update HWAM®
SmartControl™ to the most recent version, press
the button with “Update to V x.x.x” A upon
which, the update starts automatically (see pre-
vious section “Updating the HWAM® SmartCon-
trol™” for instructions to update).
Update complete √
Help
In the "Help" menu, the current status of the HWAM®
SmartControl™ can be seen and whether or not the
system has detected a fault.
It is also possible to send a log file from the stove to an
e-mail recipient A in case of combustion problems and
start a B self-test. This requires a mail programme on
the smartphone or tablet on which the app has been
installed.
16
A
A
7 Stoves
If there are more than one stove connected on the
network A, it is also possible to communicate with
them. The system supports  stoves on the same
network.
In the "Stoves" menu, select the stove you want to com-
municate with.
NOTE: Only stoking alarms for the selected stove will
be emitted.
The HWAM® SmartControl™ can provide a number of
alarms and warnings along with the possible causes
underlying the problem. It is also possible to see if there
are errors in the system.
To see the status of your system, select the "Help"
menu A
This is an alarm and you should stop using your stove
until the fault is rectified. Contact your dealer if you do
not find the answer in your app.
If the system emits an "Overheating" alarm, the stove
has become too hot. HWAM® SmartControl™ will make
sure to regulate, so the stove cools down in tempera-
ture. You do not need to do anything. The system auto-
matically returns to normal operation when the flue gas
temperature goes down.
This is a warning and you can continue to use your
stove. Nevertheless, contact your dealer so the fault
can be repaired if you do not find the answer in your
app.
Alarms & Warnings
Error ID: Red
Error ID: Yellow
17
2
1
1 LED indicator
There is an LED indicator at the bottom of the wireless
room temperature sensor. This will indicate the following:
A No connection to HWAM® SmartControl™
In the absence of a connection to the HWAM®
SmartControl™, the room temperature sensor will
alternately flash green and red.
B Pairing mode
When the room temperature sensor is ready to
be paired with the HWAM® SmartStove™, it will
flash green at a fast pace.
C Restoking
When HWAM® SmartControl™ detects that it is
time to refill with additional wood, the room tem-
perature sensor makes repetitive sounds while
flashing green at a steady pace.
D Alarms & Warnings
When HWAM® SmartControl™ detects an alarm
or warning, the room temperature sensor makes
repetitive sounds and simultaneously flashes
red.
For further information and details about the
alarm or warning in question, use the IHS Smart-
Control™ app.
A room temperature sensor is provided as a standard with the HWAM® SmartControl™. This
is used by the system to detect the room temperature and adjust the combustion in order to
ensure an even and comfortable room temperature.
The sensor communicates with HWAM® SmartControl™ via a wireless connection. The maxi-
mum distance in clear view between the HWAM® SmartStove™ and the room temperature
sensor is  - metres. The range is shorter if there are walls in between.
The room temperature sensor is provided with a light indicator 1 at the bottom of the unit, a
button on the front of the unit 2, and an in-built speaker.
NOTE: It is not possible to adjust the volume on the device.
Room temperature sensor
18
4 5
6
8
7
2 3
NOTE: After  minutes, the unit will leave the pairing
mode and automatically go into standby mode.
7 Connect the power supply immediately to the stove.
If the supply to the stove is not connected within 
minutes after the wireless room temperature sensor
is plugged into "pairing mode", the pairing will not
succeed, and will have to be restarted.
8 After the room temperature sensor is connected to
HWAM® SmartControl™ the light will briefly turn solid
green and the indicator light will then turn o. Pairing
has been successfully completed. Put on the lid and
screw in again.
1 Turn the unit on its rear end.
2 Unscrew the four screws on the backside (as shown
in the picture) to access the batteries.
3 Remove the lid from the unit.
4 Take one battery out of the unit.
5 Disconnect the power supply to the stove.
6 Press the button on the front of the wireless room
temperature sensor and hold the pressure while the
battery is put back into the unit, until the LED lights
green. When the wireless room temperature sensor
starts up, it will flash green at a fast pace as illustra-
ted below:
Pairing of the room temperature sensor with HWAM® SmartControl™
It may sometimes be necessary to pair the wireless room temperature sensor with HWAM®
SmartControl™. To do this, it is necessary to put the wireless room temperature sensor in pai-
ring mode (see instructions below).
19
2 3
8
1
4 5
6 7
1 Turn the unit on its rear end.
2 Unscrew the four screws on the backside (as shown
in the picture) to access the batteries.
3 Remove the lid from the unit.
4 Replace the  AA batteries. Always replace all  bat-
teries at the same time, and do not use old batteries.
Do not use rechargeable batteries.
5 It is important to ensure that the batteries are prop-
erly positioned in the unit. Make sure the batteries
are positioned as shown.
6 When the new batteries are positioned correctly,
the device can be reassembled - put the lid on the
device.
7 Screw the  screws in again as shown on the image.
Be careful not to overtighten them.
8 The batteries have now been replaced and the
device is ready for use.
Used batteries should not be thrown in the trash, but
should be disposed of properly.
Changing the batteries of the room temperature sensor
The wireless room temperature sensor requires  AA batteries. These are not included in the
package. In order to install and / or replace the batteries, follow these instructions carefully.
HWAM® SmartControl™ will automatically notify you when it is time to replace the batteries in
the wireless room temperature sensor.
20
Starting the stove
Open the stove door to activate the system. The system
will automatically go back to standby and the dampers
will be closed if lighting up does not occur within 
minutes.
Lighting up
Your new HWAM® SmartStove™ closes all valves when
not in use to prevent hot air from being sucked into the
chimney and out into the open (loss of energy). For the
HWAM® SmartStove™, this valve function comprises the
challenge that, at each new lighting, you will always
start out with a cold chimney - pay attention to this. It
requires extra rapid heating of the stove and chimney
when lighting the stove.
A proper lighting is best done with - kg. of firewood
chopped into - rather small pieces (the amount of
wood depends on the model - see the user manual for
instructions regarding the specific model). Then add
- pieces of fine kindling wood, and on top of it all,
place a couple of fire-lighters. Light up the firelighters
and close the door.
The HWAM® SmartControl™ starts when the combustion
chamber door is opened. The HWAM® SmartControl™
has a cold start-up program requiring that the operating
temperature is reached within  min. If the heat-up
is too slow, the app will ask for more firewood. This
may seem illogical when there is both firewood and
flames in the stove, but as long as the proper operating
temperature has not been reached, the stove does not
burn environmentally clean, and, therefore, the temper-
ature has to be reached fast. The reasons for a slow
rise in temperature may be: insucient draught in an
ancient brick chimney, damp firewood, too large fire-
wood pieces, or insucient firewood/kindling wood.
The following guide is an introduction as to how the HWAM® SmartStove™ is to be operated
from start to restoking and until the fire finally burns out. The stove is only EN-approved for
burning wood. It is recommended that you use dry split wood with a moisture content of a
maximum of %. Firing wet firewood causes soot, environmental pollution and bad fuel eco-
nomy. It is recommended that you purchase a moisture metre to verify that the wood has the
correct moisture content before being used for firing.
Firing process
IMPORTANT!
If the flue gases do not reach
a high enough temperature
for kindling or firing, HWAM®
SmartControlTM and the wire-
less room temperature sensor
emit a stoking alarm, even if
there is still unburned wood
and flames in the combustion
chamber. The stoking alarm
is emitted to make you aware
that the fire needs more
energy. Restoking with small
pieces of kindling wood can
often provide a more rapid
and sucient temperature
rise.
21
1
2
3
1 Lighting up
The lighting up symbol is displayed until the
fire is well underway and the flue gases have
reached a suciently high temperature.
2 Combustion
When a sucient flue gas temperature is
reached, HWAM® SmartControl™ changes phase
from lighting up to combustion. HWAM® Smart-
Control™ will typically run in this phase most of
the time.
3 Ember phase
When most of the wood is burned, HWAM®
SmartControl™ switches to ember phase and will
now display the estimated time remaining until
the next restoking. If there is a big dierence
between actual and desired room temperature,
the restoking alarm comes on, even though
there is unburned wood and flames. Failure to
restoke at this time will lead to a new restoking
alarm being emitted, which constitutes the last
opportunity to restoke without new lighting up.
NOTE: The time left to restoking is an approx-
imate time and may vary depending on the
circumstances.
Combustion phases
22
4
5
4 Restoking
When HWAM® SmartControl™ detects that it is
time to restoke, a notification is displayed on
all devices with IHS SmartControl™ open. In
addition, the wireless room temperature sensor
emits an audible signal for restoking. Add -
pieces of new wood to the combustion cham-
ber. HWAM® SmartControl™ will automatically
switch back to the combustion phase when the
door is opened and additional wood is added.
The above cycle is then repeated.
5 Standby
When there is no more wood burning in the
stove and the temperature has dropped,
HWAM® SmartControl™ goes into standby mode
and the valves are closed to prevent warm air
from the room escaping into the chimney (loss
of energy).
When the wood-burning stove is not in use, it
is recommended that the app should be shut
down.
23
Specications for HWAM® SmartControlTM generation 2
Distance
Distance between stove and sensor - m.
Wireless features
Frequency .-.GHz
Wireless security WPA / WPA-
Wireless standards IEEE .n, IEEE .g, IEEE .b
GHz Not available
Features
OS support IOS & Android
Connections Wi-Fi direct or Network connection
Device connections Up to  units when configured on Wi-Fi Network
Features
External power supply V – V AC / Hz, Output V DC A.
Airbox input V DC
Power consumption operation W MAX
Power consumption standby <W
Environment
Operating temperature º~º
Accessories
SmartBackup
 m extension cable
 degree cable USB → USB mini
HWAM A/S . Nydamsvej 53 . DK-8362 Hørning . hwam@hwam.com . www.hwam.com
HWAM®
SmartStove
- A whole new class of wood-burning stoves
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hwam SmartControl Generation 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hwam SmartControl Generation 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Hwam SmartControl Generation 2

Hwam SmartControl Generation 2 Gebruiksaanwijzing - Nederlands - 24 pagina's

Hwam SmartControl Generation 2 Gebruiksaanwijzing - Deutsch - 24 pagina's

Hwam SmartControl Generation 2 Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info