627050
13
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
13
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
4. Technical specificaTions
No. Description Measure Unit
1. Maximal drilling diameter 30 mm
2. Distance between axis of spindle – column surface 320 mm
3. Max. distance between spindle nose and work table surface 620 mm
4. Max. distance between spindle nose and base surface 1180 mm
5. Max. spindle travel 135 mm
6. Max. travel of work table and bracket 550 mm
7. Horizontal swing of table on bracket ± 45 degree
8. Taper of spindle bore 3 Morse
9. Number of spindle speeds 12 steps
10. Range of spindle speeds 72-2600 rpm
11. Number of spindle feeds 3 steps
12. Spindle feed range 0.1, 0.2, 0.3 mm/rev.
13. Column diameter 120 mm
14. Table working area 500 x 450 mm
15. Base working area 370 x 360 mm
16. Work table and base T-slots 2 x14 mm
17. 3-phase, 2-speed AC motor
Power 1 / 1.5 kW
Voltage 380 (220, 400, 420) V
Speed 960 / 1450 rpm
18. 3-phase electrical pump
Power 0.085 kW
Voltage 380 (220, 400, 420) V
Capacity 6 l/min
19. Electromagnetic clutch
Power 0.024 kW
Voltage 24 V
20. Machine dimensions (LxWxH) 870 x 510 x 2120 mm
21. Machine weight nett 440 kg
22. Noise level information 74/76 dB(A)
Subject to change.
5. TransporTaTion and insTallaTion
5.1. TransporT of The machine
Handle with care when transporting the machine, Pay close attention to the shipping marks. Don’t lay down
the machine on the wrong side. Avoid impact.
The machine is fully assembled and packed before shipping to the customer. Please check carefully when
opening the package and make sure no parts are missing.
When lifting the machine by crane, the center of gravity should be closely watched. For the correct method,
seef figure C. To avoid damaging the machine surface, preferably put soft materials between the rope and
the machine surface.
5.2. foundaTion and insTallaTion
Take the work table as radius, go 360° around the column to determine the max. area of the foundation. The
diameter of the foundation is 1430 mm (see figure B). Customers can decide the foundation area according
to their own needs.
The depth of the foundation is chosen so that it rests on a dense soil. The depth shown in figure D is just for
reference.
Pour concrete around the foundation bolts after setting these in the accurate positions. After solidification of
the concrete, place the machine on the foundation and tighten the foundation bolts. Check adjustment with
a spirit level in longitudinal and transversal direction.
Figure C – Machine transportation
Figure D – Foundation and installation
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huvema HU 30 TI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huvema HU 30 TI in de taal/talen: Engels als bijlage per email.

De handleiding is 2,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Huvema HU 30 TI

Huvema HU 30 TI Gebruiksaanwijzing - Nederlands - 28 pagina's

Huvema HU 30 TI Gebruiksaanwijzing - Deutsch - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info