510448
30
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
30
Operating the machine
Twin needle
If you are using a twin needle, set the size of the needle to limit
the width of all stitches and prevent needle breakage. Activate
or deactivate the twin needle function with the OK button and
use the left/right arrow buttons to set the twin needle size. Your
setting will be saved even when the machine is turned off. A
pop-up message reminds you of the setting when you turn on the
machine. Close the pop-up message by pressing OK.
NOTE: You cannot set the twin needle size if the Stitch
Width Safety is on, or turn on the Stitch Width Safety if
the machine is set for twin needle.
Stitch Width Safety
Use the OK button to turn on the Stitch Width Safety when
using a straight stitch needle plate or a straight stitch presser foot.
The stitch width will be limited to zero for all stitches to prevent
damage to the needle, presser foot and needle plate. This setting
is saved when the machine is turned off. A pop-up message
reminds you of the setting when you turn on the machine. Close
the pop-up message by pressing OK.
Buttonhole balance
If the Sensor One-Step Buttonhole Foot is not connected or if
you select stitch 1:25, the columns in the buttonhole stitch will
be sewn in different directions. On some fabrics this may cause
the columns to appear with different density. Use the left/right
buttons to balance the density between -7 and 7. The changes
only affect the selected stitch. If another stitch is selected or the
same stitch is selected again, the value is reset to the default value.
Free Motion Floating*
To sew in free motion with the included Embroidery/Darning
Foot R or with any optional Free Motion Floating presser foot,
set the machine in Free Motion Floating mode. The drop feed
teeth recommendation will be activated. The setting remains
when the machine is turned off. A pop-up reminds you of the
setting when you turn on the machine. Close the pop-up message
by pressing OK.
NOTE: You cannot set the machine in Free Motion
Floating Mode if Free Motion Spring Action is activated
or vice versa.
Free Motion Spring Action**
If you are using any of the optional Free Motion Spring Action
presser feet, you need to set the machine in Free Motion Spring
Action mode. The drop feed teeth recommendation will be
activated. The setting remains when the machine is turned off. A
pop-up message reminds you of the setting when you turn on the
machine. Close the pop-up message by pressing OK.
*Free Motion Floating
When you are sewing free motion in low speed the
foot will raise and lower with each stitch to hold the
fabric on the stitch plate while the stitch is being
formed. When sewing in high speed, the foot Á oats
over the fabric while sewing. The feed teeth must be
lowered and the fabric is moved manually. All stitches
can be sewn in free motion mode.
**Free Motion Spring Action
The Free Motion Spring Action presser feet follows
the up and down movement of the needle with help
of the spring and the arm on the presser foot. The
feed teeth must be lowered and the fabric is moved
manually. It is recommended to turn on the Stitch
Width Safety for the presser feet that are only intended
for straight stitch sewing.
Audible Alarm
Turns on or off all alarm sounds of the machine. Default setting
is on. This setting is saved even if the machine is turned off.
Contrast
Adjust the contrast of the GraphicDisplay by using the left/right
arrow buttons. The value can be set between –20 to 20 in steps
of 1. The setting is stored even when the machine is turned off.
Language
Use the left/right arrow buttons to change the language of all
text in your machine. The language setting is saved even if the
machine is turned off.
Software Version
The software version currently loaded for the sewing machine is
displayed.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna SAPPHIRE 875 Quilt bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna SAPPHIRE 875 Quilt in de taal/talen: Engels als bijlage per email.

De handleiding is 2,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt Gebruiksaanwijzing - Nederlands - 56 pagina's

Husqvarna SAPPHIRE 875 Quilt Gebruiksaanwijzing - Deutsch - 56 pagina's

Husqvarna SAPPHIRE 875 Quilt Gebruiksaanwijzing - Français - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info