510448
6
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
6
1
2
34
5
6
7
8
11
9
10
Included accessories
Presser Feet
Utility Foot A Attached on the machine upon delivery. This foot is used mainly for straight stitching and
zigzag stitching with a stitch length longer than 1.0.
Utility Foot B When sewing decorative stitches or short zigzag stitches and other utility stitches with
less than 1.0 mm stitch length, use this foot. The tunnel on the underside of the foot is
designed to feed smoothly over the stitches.
Buttonhole Foot C This foot is used for sewing buttonholes step by step. Use the guide lines on the toe of
the foot to position the garment edge. The two tunnels on the bottom of the foot ensures
a smooth feed over the buttonhole columns. The À nger on the back of the foot holds
cording for corded buttonhole.
Blind Hem Foot D This foot is used for blind hem stitches. The inner edge of this foot guides the fabric. The
right toe of the foot is designed to ride along the hem edge.
Zipper Foot E This foot can be snapped on either to the right or to the left of the needle, making it easy
to sew close to both sides of the zipper teeth. Move needle position to right or left to sew
closer to zipper teeth or for covering large cording.
Non-Stick Glide
Foot H
This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or
leather to minimize the risk of these materials sticking to the foot.
Edging Foot J This foot is used for overcasting and seam/overcasting. Stitches form over the pin which
prevents puckering at the edge of the fabric.
Quilter’s 1/4”
Piecing Foot P
(Only with 875 Quilt)*
This foot is used when piecing quilt blocks. The foot has seam guide marks 1/4ȩ (6 mm)
and 1/8ȩ (3 mm). The foot can only be used with straight stitch.
Clear Open Toe Foot
(Only with 875 Quilt)*
For satin stitch applique, taper stitches and decorative stitches. The tunnel on the underside
of the foot feeds smoothly over the stitches and the transparent foot with open front gives
greater visibility for accuracy.
Embroidery/
Darning Foot R
For free-motion darning, quilting and embroidery.
Sensor One-Step
Buttonhole Foot
When connected to the machine, the buttonhole is sewn in a suitable length to the button
size that has been entered into the machine.
1. Thread nets. Slide on the spool when using
synthetic threads that easily unwind (2).
2. Non-Stick glide plates (2)
3. Light bulb remover
4. Seam ripper
5. Brush
6. Screwdriver
7. Edge/quilting guide (Only with 875 Quilt).
8. Felt pad (2)
9. Bobbins (5)
10. Extra spool caps, one large, one small.
11. Multipurpose tool/ button reed
Needles (not pictured)
*Sold separately for 835 and 855
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna SAPPHIRE 875 Quilt bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna SAPPHIRE 875 Quilt in de taal/talen: Engels als bijlage per email.

De handleiding is 2,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt Gebruiksaanwijzing - Nederlands - 56 pagina's

Husqvarna SAPPHIRE 875 Quilt Gebruiksaanwijzing - Deutsch - 56 pagina's

Husqvarna SAPPHIRE 875 Quilt Gebruiksaanwijzing - Français - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info