518134
31
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
29
Functions and GraphicDisplay
Programming
With Platinum 770 you can program
stitches and letters into combinations.
Save the programmed combinations
in the permanent memories. A pro-
grammed stitch combination that is
saved is retained in the memory even
when the machine is turned off.
PROG mode
When programming, the Sewing Advisor
is not active. Touch FUNC to activate the
PROG mode.
Memories
Touch M to select memory. The M and
the number that follows indicates the
active memory. There are four different
memories (M01 to M04). Each of the
four memories holds up to 55 stitches,
which means that you can program and
save up to 220 stitches and/or letters.
When activating PROG, the last used
memory is active. To save your pro-
grammed combination in a memory
other than the active, select the memory
number fi rst, before programming any
stitches. The programmed combination
will be saved automatically in memory.
Move the Cursor
The cursor on the GraphicDisplay is
under the active programming space.
Use the selection buttons to move the
cursor sideways.
Delete Stitches or Programs
If there is a stitch or letter combination
in the selected memory that is displayed
in the programming area, touch CLR to
clear the memory. To reload a deleted
program, touch CLR again before you
enter new stitches.
Note: When programming, you have
the possiblity to decrease the dis-
tance between two letters. Touch <
when the numbers/special characters menu
is active, to program short reverse stitches.
The more reverse stitches you program the
shorter the distance to the next entered
letter.
Note: Both the stop and fi x functions
can be programmed. The stop func-
tion is programmed when you want
to sew only one sequence of your program.
The fi x function can be used if you want to
x at the end or in the begining of a stitch
within the programmed combination.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Husqvarna-Platinum-770

Zoeken resetten

  • Ik ben op zoek naar een nederlandse handleiding naaimachine husqvarna viking platium 770
    Gesteld op 5-3-2024 om 12:50

    Reageer op deze vraag Misbruik melden
  • hallo, mijn Husqvarna Platinum 770 heeft afgelopen jaar een onderhoudsbeurt gehad. Vervolgens waren de steken onregelmatig. Machine retour om bij te stellen. Nu wederom steken onregelmatig. Kan ik dit zelf oplossen? Zoja, hoe?
    Met de spanningsregelaar krijg ik het niet in orde. Gesteld op 24-5-2021 om 14:37

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna Platinum 770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna Platinum 770 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info