610257
13
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Instruction book/Manual de instrucciones Lily 535
13
Bobbin winding with
the machine threaded
Make sure that the presser foot is up and the
needle is in the highest position.
Note! Do not use a plastic presser foot when
bobbin winding.
1. Place your empty bobbin with the small mark
outwards on the bobbin spindle on the
front of the machine.
2. Pull the thread from the needle under the
presser foot and to the right over the thread
guide (c).
3. Start from above and wind a few turns of thread
around the bobbin. Cut off the thread on the
thread knife (d).
4. Bring the bobbin spindle down. Press the foot
control. When the bobbin winding is finished,
the bobbin will stop automatically. Remove the
bobbin, cut off the thread and bring the
bobbin spindle up.
Note! We do not recommend winding specialty
threads such as clear nylon or other stretchy
threads through the needle. Instead see "Bobbin
winding - vertical spool pin".
Bobbin winding -
vertical spool pin
1. Place an empty bobbin with the mark out-
wards on the
bobbin spindle on
the front of the
machine.
2. Place the large spool
holder under the
thread on the spool
pin.
3. Bring the thread
under the thread guide (a) and over
thread guide (b), then around thread
guide (c) as illustrated.
4. From above wind a few turns of
thread around the bobbin and
into the knife.
5. As "4." above.
Asegúrese que el prensatelas esté elevado y que la
aguja esté en su posición superior.
N.B! No utilice un prensatelas de plástico al
bobinaje.
1. Colocar la canilla vacía en el eje del canillero,
en el frente de la máquina con la marca
circular hacia fuera.
2. Pasar el hilo de la aguja, por debajo del pie
prensatelas y hacia la derecha haciéndolo
pasar por encima del guía-hilo (c).
3. Después, comenzar por arriba y dar unas
cuantas vueltas al hilo en la canilla.Cortar el
hilo con el cortador (d).
4. Conduzca el eje del canillero hacia abajo.
Presionar sobre el pedal. La máquina se para
automáticamente, cuando la canilla está llena.
Pasar el hilo por el cortador y conduzca el eje
del canillero hacia arriba.
N.B! No se debe bobinar a través de la aguja un
hilo de nylon u otro tipo de hilo muy elástico. Ver
”Devanado - porta-carrete vertical”.
Devanado de la canilla
Devanado - porta-
carrete vertical
1. Poner una canilla vacía con la marca hacia
fuera sobre el eje del
canillero en el frente
de la máquina.
2. El disco grande se
coloque como zócalo.
Ponga una bobina
sobre el porta-carrete.
3. Pasar el hilo debajo el
guía-hilo (a) y encima
el guía-hilo (b)
después debajo el guía-hilo (c).
4. Dar unas cuantas vueltas al hilo sobre la
canilla. Pasar el hilo por el corta-hilos y
cortarlo.
5. Como "4., Devanado de la canilla".
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Husqvarna-Lily-535

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna Lily 535 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna Lily 535 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info