3. MACHINE FUNCTIONS
27
Mirror Side to Side (F)
Press this button to mirror the selected stitch
side to side. If this button is pressed when
straight stitch with left needle position is
selected, the needle position is changed from
left to right. A stitch in a combination can also
be mirrored. The change will be visible on the
InfoDisplay.
If you touch the Mirror side to side button
while sewing, the machine will fi nish the stitch
and mirror the following stitch.
Stitch Elongation Button (G)
The stitch elongation button can elongate
satin stitches 3:14, 3:15, 3:16, 4:01, 4:02 and
4:04 up to fi ve times its normal size while
maintainig the density. See the change in the
stitch in the InfoDisplay.
Memory Button (H)
Use the memory to store stitch combinations.
The stored combinations will not be lost even
if you turn the sewing machine off.
EMERALD™ 203 have eight memories and
EMERALD™ 183 have four memories in
the machine. Each memory can hold up to
20 different stitches. See page 31 to program
stitches into memories.
Edit Button (I)
To modify the settings of a character or stitch
in the memory mode, use the stitch width or
length + or - buttons to select the stitch to be
modifi ed. Then press the Edit button to set
the selected stitch in the editing mode. Manual
setting of the stitch length, width and mirror
for these memorized stitches is now possible.
Press the edit button again to leave the editing
mode and return to memory mode.
Clear Button (J)
Use this button to erase an incorrect character
or stitch in a combination.The machine erases
the character you have selected. Each press of
the button erases one character, or stitch in a
combination.
BUZZER SOUND
The machine makes a click sound when you
press a button on the machine to let you
know you are selecting that stitch or function.
It also has a warning sound when selecting an
incorrect function.
It is possible to turn off the sound of the
buttonclicks and the warning sounds, press
the “E” button while turning on the machine.
On the InfoDisplay you will see two different
modes. Select between the audio on or off by
touching the width + or - buttons. Touch the
“M” button to return to normal mode.
