609685
58
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
4:16
1. 2. 3. 4.
MANUAL BARTACK
Decide the length of your bartack manually with stitch A:21.
sew:
Place fabric under the presser foot. Touch Sensor Foot Down
and Pivot twice and adjust the fabric if necessary. Step on the
foot control, the Sensor Foot lowers automatically and stitch.
1. Your machine will sew a straight stitch until you touch
Reverse .
2. Your machine will then sew in reverse until you touch
reverse again.
3. Your machine will then sew a Zig Zag, covering the
straight stitches.
4. Touch reverse to automatically tie off and cut the threads.
SEWING ON BUTTONS
Sew buttons, snaps, hooks and eyes quickly with your sewing
machine.
Select the fabric you are using and the stitch for sewing on
buttons A:32.
1. Snap off the presser foot and lower the feed teeth.
2. Place the fabric, multipurpose tool and button under the
ankle with the holes in the button lined up with the swing
of the needle. Check the swing of the needle by pressing
the mirror side to side button to be sure the needle will
not hit the button. Bring the needle down into the holes
of the button with the handwheel to verify.
Tip: When using the multipurpose tool, the button is stitched to the fabric
leaving a shank. Place the thin end of the multipurpose tool under the
button when sewing on light fabrics. Use the thick end for heavier fabrics.
Hold in place on the fabric with transparent tape.
If stitching without the multipurpose tool the button is stitched to the
fabric without distance.
Note: The recommended width of 3.0 is set for most buttons. If you sew
a tiny button or a very large coat button, decrease or increase the stitch
width until the swing of the needle sews in the holes of the button.
3. Set the number of stitches to sew on the button by
pressing the up and down arrows. Six to eight stitches is
standard.
4. Press the foot control. The sewing machine will sew the
number of stitches set on the screen and then tie off and
stop.
5. Raise feed teeth when button sewing is completed.
58

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Husqvarna-Designer-Topaz-40

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna Designer Topaz 40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna Designer Topaz 40 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 Gebruiksaanwijzing - Nederlands - 104 pagina's

Husqvarna Designer Topaz 40 Gebruiksaanwijzing - Deutsch - 104 pagina's

Husqvarna Designer Topaz 40 Gebruiksaanwijzing - Français - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info