517455
8
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
8
Instruction book/Manual de instrucciones 315, 325, 335
Connecting the foot
control
Among the accessories you will fi nd the foot con-
trol cord and the main cord.
1. Remove the foot control cord. Place the foot
control on its narrow side. Fit the plug into the
socket inside the foot control compartment.
2. Push it fi rmly to make sure it is properly
con-nected. This ope ra tion is only necessary
the very fi rst time you are going to use the
machine.
3. To correctly turn away the cord, place it into
the slot, see picture.
Note: Before plugging in, check to ensure that
the foot control is of ”type FR2”.
Connecting to the
power supply
On the underside of the
machine you will fi nd
information about the
power supply (V) and the
frequency (Hz). Check the
power supply setting in the
machine to ensure that this
agrees with the main supply
before you connect the
machine.
1. Connect the foot control
cord to the fi rst socket on
the bottom right side of the machine.
2. Connect the main cord to the back socket on
the bottom right side of the machine.
3. When you press the power switch, both the
machine and the light are switched on.
For the USA and Canada
This Sewing Machine has a polarized plug (one
blade wider than the other). To reduce the risk
of electric shock, this plug is intended to fi t in a
polarized outlet only one way. If the plug does not
t fully in the outlet, reverse the plug. If it still does
not fi t, contact a qualifi ed electrician to install the
proper outlet. Do not modify the plug in any way.
Conexión del pedal
El cable del pedal está entre los accessorios. Este
cable ha de conectarse al mando de pie.
1. Sacar el cable del pedal. Ponga de canto el pe-
dal. Introducir la clavija pequeña en el zócalo
dentro del mando de pie.
2. Controlar que la clavija de contacto está bien
ja. Esto solo ha de hacerse la primera vez,
cuando se desembala la máquina.
3. Para poder desenrollar correctamente el cable,
colóquelo en la ranura según la fi gura.
!
Atención! Controlar que el pedal tiene la
marca ”type FR2”.
Debajo del zócalo están
indicadas la tensión (voltaje)
y la frecuencia (Hz). Antes
de conectar la máquina a
red, asegurarse de que los
valores indicados coincidan
con los de la red.
1. Conectar el cable del
pedal en la entalladura
central abajo en el lado
derecho de la máquina.
2. Conectar el cable de la
red en el enchufe trasero, debajo del lado
derecho de la máquina.
3. Al pulsar el interruptor principal, se conecta la
máquina y la iluminación.
Conexión eléctrica
3
1
2
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Husqvarna-Daisy-315

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna Daisy 315 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna Daisy 315 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info