Message Cause Action
Battery problem
Temporary battery or firmware problem
in the product.
Restart the product. If the problem stays,
speak to your approved servicing dealer.
Incorrect type of battery. Use original batteries recommended by
the manufacturer.
Battery temperature outside
limits
The product cannot start because the
temperature in the battery is too high or
too low.
The product will start to operate when
the temperature of the battery has de-
creased. Make sure that the charging
station is put in an area with protection
from the sun.
Charging current too high
Incorrect or defective power supply unit. Examine that the power supply unit and
charging station are not defective. Make
sure that you use the correct power sup-
ply unit and charging station. Restart the
product. If the problem stays, speak to
your authorized service center.
Map problem
There is no specified work area. Make a work area in the Husqvarna Fleet
Services™ app. Refer to
To make a work
area on page 22
.
The map object file is incorrect. Do a check of the map in the app. Adjust
the map and save it.
Delete the map and do a new installation.
Work area tampered
The charging station or the reference sta-
tion was moved.
Move the charging station or the refer-
ence station to their initial positions.
Do a new installation of the map.
Wheel drive problem, right/
left
The wheel is blocked by grass or other
objects.
Examine the drive wheel and remove
grass or other objects.
No power in charging station
The power supply unit is incorrect or de-
fective.
Examine the power supply unit. Replace
it if necessary.
Power failure. Examine and correct the cause of the
power failure.
The product cannot charge because the
contact plates and the charging plates
are not connected.
Make sure that the charging plates and
the contact plates are connected. Clean
the contact plates and charging plates.
40 - Troubleshooting 1691 - 006 - 09.01.2023
