Message Cause Action
Battery problem
Temporary battery or firmware related issue
in the product.
Restart the product. If the problem stays
speak to your authorized service technician.
Incorrect type of battery. Use original batteries recommended by the
manufacturer.
Battery temperature
outside limits
The temperature in the battery is too high or
too low to start operation.
No action. The product will start to operate
when the temperature is in limits.
Wrong PIN code
Wrong PIN code has been entered. Five at-
tempts are permitted, and the keypad is then
blocked for a period of time.
Enter the correct PIN code. If the PIN code is
incorrect, use the link in the app to send the
PIN code to your registered e-mail address.
If you have not registered the e-mail adress,
contact your local Husqvarna representative.
No drive
Slipped
The product has got caught in something and
has been slipping.
Free the product and rectify the reason for
the lack of drive. If it is due to wet grass,
wait until the lawn has dried before using the
product.
The work area includes a steep slope. Steep slopes should be isolated. Refer to
To
put the boundary wire in a slope on page 15
.
The guide wire is not laid diagonally in the
slope.
Make sure that the guide wire is installed di-
agonally across the slope. Refer to
To make
a secondary area on page 16
.
Collision sensor
problem, front/rear
Collision
The drive wheels on the product are blocked. Free the product and correct the cause of
problem. If the problem stays, speak to your
authorized service technichian
Alarm! Mower switch-
ed off
The alarm is activated because the product
had been switched off.
Adjust the security level in the
Security
menu. Refer to
Security level on page 23
.
Alarm! Mower stop-
ped
The alarm is activated because the product
has been stopped.
Alarm! Mower lifted
The alarm is activated because the product
has been lifted.
Alarm! Mower tilted
The alarm is activated because the product
has been tilted.
Alarm! Mower was
moved
The alarm is activated because the product
has been lifted.
Alarm! Outside geo-
fence
The alarm was activated because the prod-
uct was outside its
GeoFence
.
38 - Troubleshooting 1650 - 005 - 17.03.2022
