Message Cause Action
Electronic problem
Temporary electronic or firmware related is-
sue in the product.
Restart the product. If the problem stays
speak to your authorized service technician.
Loop sensor prob-
lem, front/rear
Tilt sensor problem
Temporary problem
Invalid sub-device
combination
Temporary battery
problem
Safety function faulty
Invalid system combi-
nation
Zone generator
The battery of the zone generator accessory
is low. The zone generator accessory does
not operate when the battery is empty. The
product can cut in the stay-out zone if you
start the product before you charge the zone
generator accessory.
Park the product and charge the zone gener-
ator accessory before you start the product.
The temperature in the zone generator ac-
cessory is a higher than the maximum limit
and is set to off.
Put the product in an area with protection
from the sun. Let the temperature of the
zone generator accessory decrease before
you start the product.
Destination not
reachable
The product cannot reach the destination be-
cause there is no guide wire or boundary
wire within the work area.
Edit or make a new installation of the work
area in the app and include a guide or a
boundary wire in the work area.
The product cannot reach the destination be-
cause there is a stay-out blocking the way to
the work area.
Edit or remove the stay-out zone or make a
new installation of the work area.
Destination blocked
The way of the destination is blocked by an
obstacle.
Remove the obstacle that blocks the way to
the destination.
Battery needs re-
placement
The battery state of health is low. Replace the battery. Speak to your author-
ized service technician.
Battery near end of
life
The battery state of health is critically low. Replace the battery. Speak to your author-
ized service technician.
40 - Troubleshooting 1650 - 005 - 17.03.2022
