6. Push down the cover on the coupler with
adjustable pliers to attach the wires in the coupler.
7. Put the boundary wire or the guide wire into
position with stakes.
8. Connect the charging station to the power outlet.
3.9 After the installation of the product
3.9.1 To do a visual check of the charging
station
1. Make sure that the indicator LED lamp on the
charging station has a green light.
2. If the indicator LED lamp does not have a green
light, do a check of the installation. Refer to
Indicator lamp in the charging station on page 42
and
To install the charging station on page 18
.
3.9.2 To do the basic settings
Before the product starts to operate for the first time, you
must do the basic settings.
1. Put the product in the charging station.
2. Switch on the product.
3. Push the arrow buttons and the OK button. Select
language, country, date, time and set a PIN code.
Note: For some models, a factory PIN code is
necessary before you select a personal PIN code.
It is not possible to use 0000 as PIN code.
3.10 Product settings
You can use the keypad and the display on the product
or the Automower® Connect app to do the settings for
the functions of the product. The functions of the product
have factory settings that are applicable for almost all
work areas, but the settings can be adapted to the
conditions for each work area.
3.11 Automower® Connect app
The product can connect to mobile devices that have
the Automower® Connect app installed. Automower®
Connect is a free app for your mobile device. You
can use the extended functions for the product in the
Automower® Connect app.
• The
Dashboard
shows the current operation of the
product. You can select an operating mode for the
product in the dashboard.
• The
Map
shows the current position of the product
and the set center point for the function.
• In the
Settings
menu you can set the settings for
the product.
• In the
Statistics
menu you can see the statistics of
the product.
• In the
Messages
menu you can find the
Fault
messages
and the
Information messages
of the
product.
The Automower® Connect app has Long-range cellular
connectivity and Short-range Bluetooth® connectivity.
3.11.1 To install the Automower® Connect
app
1. Download the Automower® Connect app on your
mobile device.
2. Sign up for a Husqvarna account in the
Automower® Connect app.
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
4. Log in to your Husqvarna account in the
Automower® Connect app.
20 - Installation 1650 - 005 - 17.03.2022
