Note: When using
Weather Timer
, it is recommended
to make as much operating time as possible available
for
Weather Timer
. Do not restrict the schedule more
than necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then
Weather Timer
selects if the product will
continue to operate or not.
Note:
Weather Timer
is reset if the product does not
operate for more than 50 hours, or if a
Reset of all
user settings
is done.
Weather Timer
is not changed if a
Reset of schedule settings
is done.
3.12.6.1 To set the Weather Timer
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Weather Timer > Use
Weather Timer
.
3. Push the OK button to select the
Weather Timer
.
4. Push the BACK button.
3.12.6.2 To set the Weather Timer frequency
Set how frequently the product cuts the grass when the
Weather Timer
is in use. There are 3 frequency levels:
Low, Mid
and
High
. The higher the frequency, the more
sensitive the product is to the grass growth. That is, if
the grass growth is high then the product is allowed to
work longer.
Note: If the mowing results are not optimal when
using
Weather Timer
, the schedule settings may need
adjusting. Do not restrict the schedule more than
necessary. Also, check that the blade disc is clean and
that the blades are in good condition.
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 21
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Weather Timer
> Cutting time
.
3. Use the arrow buttons to select
Low, Mid
or
High
frequency.
4. Push the BACK button.
3.12.7 Installation
In the Installation menu it is possible to adapt the
settings of the product for best mowing result.
3.12.7.1 Lawn Coverage and Systematic Passage
Mowing
If the work area includes remote parts that are
connected with narrow passages, the
Lawn Coverage
and
Systematic Passage Mowing
function are useful to
be able to maintain a well-cut lawn in all parts of the
yard. The
Lawn Coverage
function is used to guide
the product to remote parts of the work area. The
Systematic Passage Mowing
function is used for narrow
passage mowing. A guide wire must be installed to use
these functions. You can set a maximum of 3 remote
areas.
With the
Lawn Coverage
function the product first
follows and then leaves the guide wire after a certain
distance and starts to mow the lawn.
The
Systematic Passage Mowing
function is suitable
to mow narrow passages of 60 cm - 1.5 m / 23 in. -
4.9 ft. width. The product moves in a pattern to cover
the passage width. The product starts the
Systematic
Passage Mowing
at the set distance from the charging
station. When the product reaches the end of the narrow
passage, the product continues and cuts the lawn as
normal.
Area A, approximately 50%
Area B, approximately 30%
Area C, approximately 20%
To set the Lawn Coverage function
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 21
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings > Lawn
Coverage > Area 1-3
.
3. Use the arrow button to select the area.
4. Push the OK button.
5. Measure the distance from the charging station
to the start of the area. Measure along the guide
wire. Refer to
To measure the distance from the
charging station on page 25
.
24 - Installation 1462 - 007 - 14.03.2022
