• Use the PARK function or switch off the
product when persons, especially
children, or animals are in the work area.
It is recommended to program the product
for use during hours when the area is free
from activity, e.g. at night. Consider that
certain species, e.g. hedgehogs, are
active at night. They can potentially be
harmed by the product.
• The product may only be operated,
maintained and repaired by persons that
are fully conversant with its special
characteristics and safety regulations.
Please read the Operator’s Manual
carefully and make sure you understand
the instructions before using the product.
• It is not permitted to modify the original
design of the product. All modifications
are made at your own risk.
• Check that there are no foreign objects
such as stones, branches, tools or toys
on the lawn. If the blades hit foreign
objects the blades can be damaged.
Always switch off the product with the
main switch or ON/OFF button before
clearing a blockage. Inspect the product
for damage before staring the product
again.
• If the product starts to vibrate abnormally.
Always switch off the product with the
main switch or ON/OFF button and
inspect for damage before staring the
product again.
• Start the product according to the
instructions. When the product is enabled
with the ON/OFF button or when the main
switch is set to
1
make sure to keep your
hands and feet away from the rotating
blades. Never put your hands and feet
under the product.
• Never touch moving hazardous parts,
such as the blade disc, before it has
come to a complete stop.
• Never lift up the product or carry it around
when it is switched on.
• The product must never be allowed to
collide with persons or other living
creatures. If a person or other living
creature comes in the product’s way it
shall be stopped immediately.
• Do not put anything on top of the product
or its charging station.
• Do not allow the product to be used with a
defective guard, blade disc or body.
Neither should it be used with defective
blades, screws, nuts or cables. Never
connect a damaged cable, or touch a
damaged cable before it is disconnected
from the supply.
• Do not use the product if the main switch
or the ON/OFF button do not work.
• Always switch off the product using the
main switch or the ON/OFF button when
the product is not in use. The product can
only start when the main switch is set to
1
, or the ON/OFF button is switched on
12 - Safety 1418 - 004 - 10.03.2020
