734098
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Maintenance Daily Weekly Monthly
Clean the air filter. Replace if it is necessary. X
Make sure that the blade is sharp and put correctly in the center, look for cracks.
If the blade is not in the center correctly, it can cause damage to the product. X
Examine the cutting attachment guard for damages and cracks. Replace it if it is
damaged. X
Examine the trimmer head for damages and cracks. Replace it if it is damaged. X
Make sure that the screws and nuts are tight. X
Examine the engine, the fuel tank and the fuel lines for leaks. X
Examine the transport guard. Make sure that the blade is not damaged and that
the transport guard can be attached correctly. X
Clean the cooling system. X
Examine the starter and the starter rope for damages. X
Examine the vibration damping units for damages and cracks. X
Clean the external surface part of the spark plug. Remove it and do a check of
the electrode gap. Adjust the electrode gap to the correct distance (refer to
Technical data on page 25
) or replace the spark plug. Make sure that the spark
plug has a supressor.
X
Clean the external surface of the carburetor and the area around it. X
Do a check of the bevel gear to make sure that it is filled ¾ with lubricant. Use
special grease to fill if it is necessary. X
Clean or replace the spark arrestor mesh on the muffler. X
Do a check of the fuel filter for contamination and the fuel hose for cracks or oth-
er defects. Replace if it is necessary. X
Do a check of all cables and connections. X
Do a check of the clutch, clutch springs and the clutch drum for wear. If it is nec-
essary to replace 1 or more of these units, speak to your servicing dealer. X
Replace the spark plug. Make sure that the spark plug has a supressor. X
Examine and clean the spark arrestor mesh on the muffler. X
To adjust the idle speed
WARNING: Read the warning instructions in
the safety chapter before you start the
product. Refer to
Safety on page 4
).
WARNING: If the cutting attachment rotates
when the engine is at idle speed the idle
adjustment screw T must be turned
counterclockwise until the cutting
attachment stops.
1. Make sure that the air filter is clean.
2. Make sure that the air filter cover is in position.
3. Get the idle adjustment screw T.
4. Turn the idle adjustment screw T clockwise until the
cutting attachment starts to rotate
T
.
1104 - 005 - 21
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna 553RBX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna 553RBX in de taal/talen: Engels als bijlage per email.

De handleiding is 2,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Husqvarna 553RBX

Husqvarna 553RBX Gebruiksaanwijzing - Deutsch, English, Français, Italiano, Português, Espanõl, Polski, Türkiye - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info