734097
23
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
To adjust the idle speed
Your Husqvarna product is made to specifications that
decrease harmful emissions.
1. Make sure that the air filter is clean and the air filter
cover is attached before you adjust the idle speed.
2. Adjust the idle speed with the idle speed screw T
which is identified with "T" mark.
a) Turn the idle speed screw T clockwise until the
cutting attachment starts to rotate.
b) Turn the idle speed screw T counterclockwise
until the cutting attachment stops.
WARNING: If the cutting attachment
does not stop when you adjust the idle
speed, speak to your servicing dealer.
Do not use the product until it is correctly
adjusted or repaired.
3. The idle speed is correct when the engine operates
smoothly in all positions. The idle speed must be
below the speed when the cutting attachment starts
to rotate.
Note: Refer to
Technical data on page 28
for the
recommended idle speed.
To adjust the start throttle speed
(545FR, 545RX, 545RXT)
1. Apply idle speed to the product.
2. Push the start throttle lock. Refer to
Product
overview on page 2
.
3. If the start throttle speed is less than 4000 rpm, turn
the adjuster screw (A) clockwise. When the cutting
attachment starts to rotate, turn the adjuster
screw (A) 1/2 turn clockwise.
A
4. If the start throttle speed is more than 6500 rpm, turn
the adjuster screw (A) counterclockwise. When the
cutting attachment starts to rotate, turn the adjuster
screw (A) 1/2 turn.
To clean the muffler
WARNING: The muffler gets very hot during
and after operation, also at idle speed. Risk
of fire and burn injuries.
1. If the muffler on your product has a spark arrester
screen, clean it weekly with a steel brush. Replace
the spark arrester screen if it is damaged.
CAUTION: A blocked spark arrester screen
causes the engine to become too hot and
results in damage to the cylinder and piston.
CAUTION: If the spark arrester screen is
frequently blocked, let your service agent
examine the muffler.
To clean the cooling system and starter
pawls
The cooling system includes:
The cylinder cover (A)
The cooling fins on the cylinder (B)
The fins on the flywheel (C)
The air intake on the starter (D)
1018 - 004 - 06.02.2020 23
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna 545FR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna 545FR in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Husqvarna 545FR

Husqvarna 545FR Gebruiksaanwijzing - Nederlands, Deutsch, Français - 112 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info