733994

Husqvarna 530iBX Handleiding

20
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
320iB Mark II, 525iB, 530iBX
EN Operator's manual 2-22
Contents
Introduction..................................................................... 2
Safety..............................................................................3
Assembly...................................................................... 14
Operation...................................................................... 14
Maintenance................................................................. 17
Troubleshooting............................................................ 18
Transportation, storage and disposal........................... 19
Technical data.............................................................. 20
Accessories.................................................................. 21
EC Declaration of Conformity....................................... 22
Introduction
Product overview
20
21
19
7 8
10 9
1
2
3
6
4
5
1
2
3
4
5
12
11
13
17
18
15
14
16
1. Blower nozzle
2. Keypad
3. Power trigger
4. Handle
5. Support eyelet for harness (525iB, 530iBX)
6. Supports
7. Start/stop button
8. Warning indicator (ERROR LED)
9. Boost: Temporary increase of airflow
10. Cruise control: Set the optimal air flow for your work
11. Cord
12. Battery charger
13. Power and warning indicator
14. Battery release button
2 788 - 002 - 25.02.2020
15. Battery
16. Warning indicator (ERROR LED)
17. Battery indicator button
18. Battery status
19. Operator's manual
20. Harness (525iB)
21. Harness, hip pad (530iBX)
Product description
Husqvarna 320iB Mark II, 525iB, 530iBX are blower
models with an electrical motor.
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of products without prior notice.
Intended use
This product is designed for blowing leaves and other
debris from lawns, pathways, asphalt roads and the like.
Symbols on the product
Warning! The blower can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of the
operator's manual. Please read the
operator's manual carefully and make sure
you understand the instructions before using
the machine.
Use approved eye protection.
Direct current.
Noise emission to the environment refer to
the European Community's Directive. The
emission of the product is specified in the
Technical data chapter and on the label.
Symbols on the product or its packaging
indicate that this product cannot be handled
as domestic waste. This product must be
deposited at an appropriate recycling facility.
The product agrees with the applicable EC
directives.
Protected against splashing water.
The blower operator must ensure that
no people or animals come closer
than 15 metres. When several opera-
tors are working at the same site a
safety distance of at least 15 metres
must be in effect. The blower can for-
cibly throw objects that can bounce
back. This can result in serious eye
injuries if the recommended safety
equipment is not used.
yyyy wwxxxxx The rating plate shows the serial
number. yyyy is the production year,
ww is the production week and xxxxx
is the sequential number.
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82 Huskvarna
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes
are used to point out specially
important parts of the manual.
WARNING: Used if there
is a risk of injury or death
for the operator or
bystanders if the
788 - 002 - 25.02.2020 3
instructions in the
manual are not obeyed.
CAUTION: Used if there
is a risk of damage to the
product, other materials
or the adjacent area if
the instructions in the
manual are not obeyed.
Note: Used to give more
information that is necessary in
a given situation.
Introduction
WARNING: Read all
safety warnings and all
instructions. Failure to
follow the warnings and
instructions may result in
electric shock, fire and/or
serious injury.
General power tool safety
warnings
Check before starting
•
Inspect the working area.
Remove all loose objects,
such as stones, broken glass,
nails, steel wire, string etc. that
could be thrown out.
•
Always remove the battery to
prevent the machine being
started by accident. Always
disconnect the battery before
any maintenance on the
machine.
•
Before using the machine and
after any impact, check for
signs of wear or damage and
repair as necessary.
•
Only use original spare parts.
•
The machine operator must
ensure that no people or
animals come closer than 15
metres while working. When
several operators are working
in the same area the safety
distance should be at least 15
metres.
•
Do an overall inspection of the
machine before use, see
maintenance schedule.
•
National or local regulations
may regulate the use. Comply
to given regulations.
Personal safety
•
Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the
influence of drugs, alcohol or
medication. A moment of
inattention while operating
power tools may result in
serious personal injury.
•
Keep bystanders away.
4
788 - 002 - 25.02.2020
•
This appliance is not intended
for use by person (including
children) with reduced
physical, sensory or mental
capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
•
Never allow children or other
persons not trained in the use
of the machine and/or the
battery to use or service it.
Local laws may regulate the
age of the user.
•
Keep unauthorised persons at
a distance. Children, animals,
onlookers and helpers should
be kept outside the safety
zone of 15 m (50 ft.). Stop the
machine immediately if
anyone approaches.
•
Store the equipment in a
lockable area so that it is out
of reach of children and
unauthorized persons.
•
Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewellery
or long hair can be caught in
moving parts.
•
Never use the machine if you
are tired, if you have drunk
alcohol, or if you are taking
medication that could affect
your vision, your judgement or
your coordination.
•
Wear personal protective
equipment. See instructions
under the heading "Personal
protective equipment".
•
Always remove the battery
when passing the machine to
another person.
•
Keep in mind that it is you, the
operator that is responsible for
not exposing people or their
property to accidents or
hazards.
Power tool use and care
•
Never use a machine that has
been modified in any way from
its original specification. Never
use the machine near
explosive or flammable
materials.
•
Never use a machine that is
faulty. Carry out the safety
checks, maintenance and
service instructions described
in this manual. Some
maintenance and service
measures must be carried out
by trained and qualified
788 - 002 - 25.02.2020
5
specialists. See instructions
under the heading
Maintenance.
•
Only use original spare parts.
•
Always ensure that ventilation
openings are kept clear of
debris.
•
All covers, guards and handles
must be fitted before starting.
•
Only use the machine in
daylight or in other well-lit
conditions.
•
Never use the machine in bad
weather, for instance in fog, in
rain, damp or in wet locations,
strong winds, intense cold, risk
of lightning, etc. Extremely hot
weather may cause
overheating of the machine.
Operation in bad weather is
tiring and can lead to
dangerous conditions, for
instance slippery surfaces.
•
If the machine starts vibrating
abnormally, stop the machine
and remove the battery.
•
Walk, never run.
General safety instructions
WARNING: Read the
warning instructions that
follow before you use the
product.
•
Incorrect or careless use of
the product can turn it into a
dangerous tool that can cause
serious or even fatal injury to
the operator or others. You
must read and understand the
contents of this operator's
manual.
•
Under no circumstances may
the design of the product be
modified without the
permission of the
manufacturer. Never use a
product that has been
modified in any way from its
original specification and
always use original
accessories. Non-authorized
modifications and/or
accessories can result in
serious personal injury or the
death of the operator or
others. Your warranty may not
cover damage or liability
caused by the use of non-
authorized accessories or
replacement parts.
•
This product produces an
electromagnetic field during
operation. This field may
under some circumstances
interfere with active or passive
medical implants. To reduce
the risk of serious or fatal
injury, we recommend persons
with medical implants to
consult their physician and the
6
788 - 002 - 25.02.2020
medical implant manufacturer
before operating this product.
•
Remove the battery from the
product during charging.
Safety instructions for operation
WARNING: Read the
warning instructions that
follow before you use the
product.
•
If you encounter a situation
where you are uncertain how
to proceed you should ask an
expert. Contact your dealer or
your service workshop. Avoid
all usage which you consider
to be beyond your capability.
•
Never use the product in bad
weather, for instance in fog, in
rain, strong winds, intense
cold, etc.
•
Do not allow children to use or
be in the vicinity of the
product. Since the product is
easy to start, children may be
able to start it if they are not
kept under full surveillance.
This can mean a risk of
serious personal injury.
Disconnect the battery when
the product is not under close
supervision.
•
Ensure that no people or
animals come closer than 15
metres (50 ft.) while you work.
When several operators are
working in the same area the
safety distance should be at
least 15 metres. Otherwise
there is a risk of serious
personal injury. Stop the
product immediately if anyone
approaches. Never swing the
product around without first
checking behind you to make
sure that no one is within the
safety zone.
•
Make sure that you can move
and stand safely. Check the
area around you for possible
obstacles (roots, rocks,
branches, ditches, etcetera) in
case you have to move
suddenly. Take great care
when you work on sloping
ground.
•
Keep a good balance and a
firm foothold at all times. Do
not overreach.
•
Listen out for warning signals
or shouts when you wear
hearing protection. Always
remove your hearing
protection as soon as the
product stops.
•
Show consideration to persons
in your surroundings by
avoiding using the product at
unsuitable times, such as late
in the evening or early in the
morning. Follow local
regulations and ordinances.
788 - 002 - 25.02.2020
7
•
Use the product with the
lowest possible airflow. It is
seldom necessary to use full
airflow, and many work
procedures can be done at
half airflow. A lower airflow
means less noise and less
dust, and it is also easier to
keep control over the rubbish
collected together/moved.
•
Use a rake or a brush to
release rubbish stuck to the
ground.
•
Hold the opening of the blower
as close to the ground as
possible.
•
Observe your surroundings.
Direct the product away from
persons, animals, play areas,
cars etc..
•
Minimize the blowing time by
lightly wetting dusty areas or
using spray equipment.
•
Be aware of the wind direction.
Work with the wind to make
your work easier.
•
Stop the product and remove
the battery if the product starts
to vibrate abnormally.
•
Using the blower to move
large piles is time consuming
and creates unnecessary
noise.
•
Clean up afterwards. Make
sure that you have not blown
rubbish into someone's
garden.
•
Do not run with the product.
•
The powerful currents of air
can move objects at such a
speed that they can bounce
back and cause serious eye
injuries.
•
Do not direct the airflow
towards people or animals.
•
Stop the motor before you
assemble or dismantle
accessories or other parts.
•
Keep all parts of your body
away from hot surfaces.
•
Never put the product down
when it is activated unless you
have it in clear sight.
8
788 - 002 - 25.02.2020
•
The blower must not be used
while on a ladder or
scaffolding.
•
Do not use the product unless
you are able to call for help in
case of an accident.
•
Watch out for thrown objects.
Stones, rubbish, etc., can be
thrown up into the eyes
causing blindness or serious
injury.
•
Use a residual-current device
(RCI) for increased security. A
residual-current device is fitted
to protect operators in case an
electrical fault should occur.
•
This product is renowned for
its low vibration load.
Overexposure to vibration can
lead to circulatory damage or
nerve damage in people who
have impaired circulation.
Contact your doctor if you
experience symptoms of
overexposure to vibration.
Such symptoms include
numbness, loss of feeling,
tingling, pricking, pain, loss of
strength, changes in skin
colour or condition. These
symptoms normally appear in
the fingers, hands or wrists.
•
Only use the product for the
purpose it was intended for.
•
It is not possible to cover
every conceivable situation
you can face. Always exercise
care and use your common
sense. Avoid all situations
which you consider to be
beyond your capability. If you
still feel uncertain about
operating procedures after
reading these instructions, you
should consult an expert
before continuing.
Personal protective equipment
WARNING: Read the
warning instructions that
follow before you use the
product.
•
Always use approved personal
protective equipment when
you use the product. Personal
protective equipment cannot
fully prevent injury but it
decreases the degree of injury
if an accident does occur. Let
your dealer help you select the
right equipment.
•
Long term exposure to noise
can result in damaged
hearing. In general, battery
788 - 002 - 25.02.2020
9
powered products are
relatively quiet but damage
can result from a combination
of noise level and long usage.
recommends that operators
use hearing protectors when
using products for a longer
coherent time of a day.
Continual and regular users
should have their hearing
checked regularly. Note that
hearing protectors limit the
ability to hear sounds and
warning signals.
•
Use approved eye protection.
If you use a visor, you must
also use approved protective
goggles. Approved protective
goggles must comply with the
ANSI Z87.1 standard in the
USAs or EN 166 in EU
countries.
•
Use clothing made of a strong
fabric. Always use heavy, long
pants and long sleeves. Do
not use loose clothing that can
catch on twigs and branches.
Do not wear jewelry, short
pants, sandals or go with bare
feet. Put your hair up safely
above shoulder level.
•
Keep first aid equipment close
at hand.
•
A breathing mask should be
used when there is a risk of
dust.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
•
In this section the product’s
safety features, its purpose
and how checks and
maintenance should be carried
out to ensure that it operates
correctly. See instructions
under the heading
Product
overview on page 2
to find
where these parts are located
on your product.
•
The life span of the product
can be reduced and the risk of
accidents can increase if
10
788 - 002 - 25.02.2020
product maintenance is not
carried out correctly and if
service and/or repairs are not
carried out professionally. If
you need further information
please contact your nearest
servicing dealer.
•
Never use a product with
defective safety components.
The product's safety
equipment must be inspected
and maintained as described
in this section. If your product
fails any of these checks,
contact your service agent to
get it repaired.
•
All servicing and repair work
on the product requires special
training. This is especially true
of the product′s safety
equipment. If your product fails
any of the checks described
below you must contact your
service agent. When you buy
any of our products we
guarantee the availability of
professional repairs and
service. If the retailer who sells
your product is not a servicing
dealer, ask him for the
address of your nearest
service agent.
To do a check of the keypad
1. Press and hold the start/stop
button (B).
A
B
C
a)The product is switched on
when the LED (A) is lit.
b)The product is switched off
when the LED (A) is out.
2. See
Troubleshooting on
page 18
if the warning
indicator (C) is lit or flashes.
To do a check of the power
trigger
1. Push and release the power
trigger to make sure that it
moves freely.
Battery safety
WARNING: Read the
warning instructions that
follow before you use the
product.
788 - 002 - 25.02.2020 11
•
Only use the Husqvarna BLi
battery. Refer to
Approved
batteries on page 21
. The
battery is software encrypted.
•
Use the Husqvarna BLi
battery that is rechargeable
as a power supply for the
related Husqvarna products
only. To prevent injury, do not
use the battery as a power
supply for other devices.
•
Risk of electrical shock. Do
not connect the battery
terminals to keys, coins,
screws or other metal. This
can cause a short circuit of
the battery.
•
Do not use non-rechargeable
batteries.
•
Do not put objects into the air
slots of the battery.
•
Keep the battery away from
sunlight, heat or open flame.
The battery can cause burns
and/or chemical burns.
•
Keep the battery away from
rain and wet conditions.
•
Keep the battery away from
microwaves and high
pressure.
•
Do not try to disassemble or
break the battery.
•
If the battery leaks, do not let
the liquid touch your body or
eyes. If you have touched the
liquid, clean the area with a
large quantity of water and
soap, and get medical aid. If
you get liquid in your eyes, do
not rub but flush with water
for a minimum of 15 minutes
and get medical aid.
•
Use the battery in
temperatures between -10 °C
(14 °F) and 40 °C (114 °F).
•
Do not clean the battery or
the battery charger with
water. Refer to
To clean the
product, the battery and the
battery charger on page 18
.
•
Do not use a defective or
damaged battery.
•
Keep batteries in storage
away from metal objects such
as nails, screws or jewelry.
•
Keep the battery away from
children.
Battery charger safety
WARNING: Read the
warning instructions that
follow before you use the
product.
•
Risk of electrical shock or
short circuit if the safety
instructions are not obeyed.
•
Do not use other battery
chargers than the one
supplied for your product.
Only use Husqvarna QC
chargers when you charge
Husqvarna BLi replacement
batteries.
12
788 - 002 - 25.02.2020
•
Do not try to disassemble the
battery charger.
•
Do not use a defective or
damaged battery charger.
•
Do not lift the battery charger
by the power cord. To
disconnect the battery
charger from a mains socket,
pull out the plug. Do not pull
the power cord.
•
Keep all cables and extension
leads away from water, oil
and sharp edges. Make sure
that the cable is not caught
between objects, for example,
doors, fences or equivalent.
•
Do not use the battery
charger near flammable
materials or materials that
can cause corrosion. Make
sure that the battery charger
is not covered. Pull out the
plug to the battery charger if
there is smoke or fire.
•
Only charge the battery
indoors in a location with
good airflow and away from
sunlight. Do not charge the
battery outdoors. Do not
charge the battery in wet
conditions.
•
Only use the battery charger
where the temperature is
between 5 °C (41 °F) and 40
°C (104 °F). Use the charger
in an environment which has
a good airflow, dry and free
from dust.
•
Do not put objects into the
cooling slots of the battery
charger.
•
Do not connect the battery
charger terminals to metal
objects as this can short
circuit the battery charger.
•
Use approved mains sockets
that are not damaged. Make
sure that the cord of the
battery charger is not
damaged. If extension cables
are used, make sure that the
extension cables are not
damaged.
Safety instructions for
maintenance
WARNING: Read the
warning instructions that
follow before you do
maintenance on the
product.
•
Remove the battery before
you do maintenance, other
checks or assemble the
product.
•
The operator must only do the
maintenance and servicing
shown in this operator's
manual. Speak to your
servicing dealer for
maintenance and servicing of
a larger extension.
788 - 002 - 25.02.2020
13
•
Keep all nuts, bolts and
screws tight to be sure the
product is in safe working
condition.
•
Replace worn or damaged
parts.
•
If you do not do maintenance,
it decreases the life cycle of
the product and increases the
risk of accidents.
•
Special training is necessary
for all servicing and repair
work, especially for the safety
devices on the product. If not
all checks in this operator's
manual are approved after
maintenance, speak to your
servicing dealer. We
guarantee that there are
professional repairs and
servicing available for your
product.
•
Only use original spare parts.
Assembly
To assemble the tube on the product
1. Put the blower nozzle over the tubular end of the
product.
2. Push the blower nozzle in fully and turn the blower
nozzle to lock it to the product.
To adjust the harness
1. Put the hip pad straps through the fastenings in the
harness for the backpack battery.
2. Adjust the harness to optimize the work position.
Operation
Introduction
WARNING: Read and understand the safety
chapter before you use the product.
To do a function check before you use
the product
1. Do a check of the air inlet for dirt and cracks. Use a
brush and clean off grass and leaves from the
product.
2. Make sure that the product works correctly.
14 788 - 002 - 25.02.2020
3. Do a check of all nuts and screws and make sure
that they are tight.
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Note: The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool before the
battery charges.
Backpack battery (530iBX)
The backpack battery capacity is shown with digits on
the product and the LED lamps on the backpack battery.
See the backpack battery operator's manual for
information about how to charge and do maintenance on
the backpack battery.
To charge the battery
Note:
Charge the battery if it is the first time that you use
it. A new battery is only 30% charged.
1. Make sure that the battery is dry.
2. Put the battery in the battery charger.
3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4. When all LEDs on the battery come on, the battery is
fully charged.
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note: Refer to the battery and battery charger manuals
for more information.
To connect the battery to the product
WARNING: Only use Husqvarna original
batteries in the product.
1. Make sure that the battery is fully charged.
2. Slide the battery into the battery holder of the
product. The battery must slide easily, if not, it is not
installed correctly.
3. Press the lower part of the battery and push it in as
far as it will go into the battery compartment. The
battery will lock into position when you hear a click.
788 - 002 - 25.02.2020
15
4. Make sure that the latches snap in place correctly.
To connect the backpack battery to the
product
1. Connect the adapter cable from the product to the
backpack battery.
2. Fasten the battery cable in the attachments on the
harness.
3. When the back pack battery is used, carry the
backpack battery on the back.
To start the product
1. Press and hold the start button until the green LED
light comes on.
2. Use the power trigger to control the speed.
To start the product
When the backpack battery starts there is a startup time
of about 4 seconds (software booting). During that time,
you can hear the fans inside the backpack battery
blowing and a green LED on the battery blinks. When
the green LED is lit on the battery, the product is ready
to start.
1. Start the backpack battery. Do not proceed the steps
that follow before the green LED is lit.
2. Press and hold the start button until the green LED
light comes on.
3. Use the power trigger to control the speed.
To stop the product
1. Release the power trigger.
2. Push and hold the stop button until the green LED
light comes off.
3. Remove the battery from the product. Push the two
release buttons and pull out the battery.
To stop product and the backpack
battery
1. Release the power trigger.
2. Press and hold the stop button until the green LED
light comes off.
3. Unplug the backpack battery cable from the product
.
Note:
If the backpack battery is not used for more than
30 minutes, the backpack battery turns off automatically.
To start the backpack battery again, press the start
button on the backpack battery.
16 788 - 002 - 25.02.2020
To set the optimal airflow for your work
1. Press the power trigger to choose the optimal airflow
for your work.
2. Press the cruise control button to set the chosen
airflow, the LED comes on.
3. Continue to work without needing to press the power
trigger.
4. Press the cruise control button again to deactivate
the cruise control function.
To temporarily increase the airflow
1. Start the product. See
To start the product on page
16
.
2. Press and hold the boost button to get the maximum
airflow, the LED comes on.
a) 525iB, 530iBX has unlimited boost time.
b) 320iB Mark II has a limited boost time of 30
seconds. Release and press the boost button
again.
3. Release the boost button to use the product with
normal air flow.
Maintenance
Introduction
WARNING: Before you do any maintenance
work you must read and understand the
safety chapter.
Maintenance schedule
WARNING: Remove the battery before you
do maintenance.
The following is a list of the maintenance steps that you
must do on the product.
Maintenance Daily Weekly Monthly
Clean the outside of the machine with a clean and dry cloth. Never use water. X
Keep handles dry, clean and free from oil and grease. X
Make sure that the start/stop button works correctly and is not damaged. X
Make sure the power trigger is functioning properly with regard to safety. X
Check that nuts and screws are tight. X
Check that the battery is intact. X
788 - 002 - 25.02.2020 17
Maintenance Daily Weekly Monthly
Check the battery's charge. X
Check that the release buttons on the battery works and locks the battery into
the machine.
X
Check that the battery charger is intact and functional. X
Check that all couplings, connections and cables are intact and free from dirt. X
Check the connections between the battery and the machine and also check the
connection between battery and the battery charger.
X
To do a check of the air intake
1. Make sure that the air intake is not blocked on any
side on the product.
2. Stop the product and remove leaves or unwanted
material if necessary.
CAUTION: A blocked air intake
decreases the blowing capacity of the
product and increases the motor's
working temperature. This can result in
motor failure due to overheating.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
Troubleshooting
Keypad
Keypad Possible faults Possible action
Green LED flashing Low battery voltage. Charge the battery.
Red error LED flashing The power trigger and the start but-
ton are pressed at the same time.
Release the power trigger and the
product becomes active.
Temperature deviation. Let the product cool down.
The product does not start Dirt in battery connectors. Clean with compressed air or a soft
brush.
Red error LED is lit The product needs servicing. Contact your servicing agent.
18 788 - 002 - 25.02.2020
Battery
LED display Possible faults Possible action
Green LED flashing Low battery voltage. Charge the battery.
Red error LED flashing The battery is discharged. Charge the battery.
Temperature deviation. Use the battery in tempereatures be-
tween -10°C (14°F) and 40°C
(104°F).
Over voltage. Check that the mains voltage corre-
sponds with that stated on the rating
plate on the product.
Remove the battery from the battery
charger.
Red error LED is lit Cell difference is to much (1V). Contact your servicing agent.
Backpack battery
See the backpack battery manual for troubleshooting of
the backpack battery.
Battery charger
Problem Possible faults Possible solution
Red error LED flashes. Temperature deviation. Use the battery charger in tempera-
tures between 5 °C (41 °F) and 40 °C
(104 °F).
Red error LED comes on. Speak to your servicing dealer.
Transportation, storage and disposal
Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
• Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
• Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
• Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
• Remove the battery for storage or transportation.
• Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
• Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
• Put the battery in storage where the temperature is
between 5°C/41°F and 25°C/77°F and away from
open sunlight.
• Put the battery charger in storage where the
temperature is between 5 °C/41 °F and 45°C/113°F
and away from open sunlight.
• Use the battery charger only when the surrounding
temperature is between 5°C/41°F and 40°C/104°F.
• Charge the battery 30% to 50% before you put it in
storage for long periods.
• Put the battery charger in storage in a space that is
closed and dry.
• Keep the battery away from the battery charger
during storage. Do not let children and other not
788 - 002 - 25.02.2020 19
approved persons to touch the equipment. Keep the
equipment in a space that you can lock.
• Clean the product and do a full servicing before you
put the product in storage for a long time.
• Use the transportation guard on the product to
prevent injuries or damage on the product during
transportation and storage.
• Attach the product safely during transportation.
Disposal of the battery, battery charger
and product
The symbol below means that the product is not
domestic waste. Recycle it at a recycling station for
electrical and electronic equipment. This helps to
prevent damage to the environment and to persons.
Speak to local authorities, domestic waste service or
your dealer for more information.
Note: The symbol shows on the product or package of
the product.
Technical data
Technical data
320iB Mark II 525iB 530iBX
Motor
Motor type BLDC (brushless)
36V
BLDC (brushless)
36V
BLDC (brushless)
36V
Weight
Weight without battery, kg/ lb 2.5/5.5 2.4/5.3 2.9/6.4
1
Noise emissions
2
Sound power level, measured dB (A) 95 97 92
Sound power level, guaranteed L
WA
dB (A) 96 98 93
Water protection level
All weather use Yes Yes Yes
IPX4
3
No Yes Yes
Sound levels
4
Equivalent sound pressure level at the oper-
ator's ear, measured according to EN ISO
11203 and ISO 22868, dB (A):
81 82 77.6
Vibration levels
5
1
weight with cable included
2
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC. Reported sound power level for the machine has been measured with the original cutting attach-
ment that gives the highest level. The difference between guaranteed and measured sound power is that the
guaranteed sound power also includes dispersion in the measurement result and the variations between dif-
ferent machines of the same model according to Directive 2000/14/EC.
3
The Husqvarna Handheld Battery products marked with IPX4 fulfils these requirements on product approval
level
4
Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (stand-
ard deviation) of 3 dB (A).
5
Reported data for vibration level has a typical statistical dispersion (standard deviation) of 2 m/s
2
.
20 788 - 002 - 25.02.2020
320iB Mark II 525iB 530iBX
Vibrations levels at handles, measured ac-
cording to ISO 22867, m/s
2
0.7 0.5 0.4
Fan performance
Air flow in normal mode with standard noz-
zle, m
3
/min
11.0 11.6 12.1
Maximum air velocity in normal mode with
standard nozzle, m/s / mph
47 / 105.1 48 / 107.4 49 / 109.6
Noise and vibration data are determined on the basis of
the rated maximum speed.
Approved batteries
Only use original Husqvarna BLi batteries for this
product.
Approved battery chargers
Battery charger QC330 QC500
Input voltage, V 100-240 100-240
Frequency, Hz 50-60 50-60
Power, W 330 500
Accessories
Approved accessories
Approved accessories
Type Art. no.
Nozzle (lenght)
Flat Nozzle 600 mm) 579 79 75-01
Round Nozzle with metal ring
(300 mm)
586 10 63-01
Round Nozzle with metal ring
(400 mm)
586 10 63-02
Nozzle Silencer (400 mm) 589 81 17-01
Handlebar Handlebar for 530iBX 501 71 51-01
Battery belt FLEXI
Carrying Kit for BLi batteries 590 77 67-01
Adapter Kit for 320iB Mark II and
525iB
590 77 67-02
Connector Kit for 530iBX
6
590 77 67-03
6
320iB Mark II and 525iB requires the backpack BLiX-adapter
788 - 002 - 25.02.2020 21
EC Declaration of Conformity
EC Declaration of conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: tel:
+46-36-146500, declares under sole responsibility that
the battery leaf blowers Husqvarna 320iB Mark II and
525iB from 2018’s serial numbers and onwards (the
year is clearly stated in plain text on the type plate with
subsequent serial number), are in conformity with the
requirements of the COUNCIL’S DIRECTIVES:
• of May 17, 2006 ”relating to machinery” 2006/42/EC.
• of February 26, 2014 ”relating to electromagnetic
compatibility” 2014/30/EU.
• of September 6, 2006 "on batteries and
accumulators and waste batteries and accumulators"
2006/66/EC
• of May 8, 2000 ”relating to the noise emissions in the
environment” 2000/14/EC.
• of June 8, 2011 on the "restriction of use of certain
hazardous substances" 2011/65/EU
The following standards have been applied: EN
60335-1:2012 (IEC 60335-2-100:2002), EN ISO
14982:2009, CISPR 12:2007+A1:2009
In addition, RISE SMP Svensk Maskinprovning AB, ,
Sweden, has certified conformity with annex V of the
Council's Directive of May 8, 2000 "relating to the noise
emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/012/010-320iB Mark
II, 01/012/011-525iB.
For information relating to noise emissions, see
Technical data on page 20
.
Huskvarna, 2018-01-02
Pär Martinsson, Development manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation.)
EC Declaration of conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: tel:
+46-36-146500, declares under sole responsibility that
the battery leaf blower Husqvarna 530iBX from 2018’s
serial numbers and onwards (the year is clearly stated in
plain text on the type plate with subsequent serial
number), are in conformity with the requirements of the
COUNCIL’S DIRECTIVES:
• of May 17, 2006 ”relating to machinery” 2006/42/EC.
• of February 26, 2014 ”relating to electromagnetic
compatibility” 2014/30/EU.
• of September 6, 2006 "on batteries and
accumulators and waste batteries and accumulators"
2006/66/EC
• of May 8, 2000 ”relating to the noise emissions in the
environment” 2000/14/EC.
• of June 8, 2011 on the "restriction of use of certain
hazardous substances" 2011/65/EU
The following standards have been applied: EN
60335-1:2012 (IEC 60335-2-100:2002), EN
55014-1:2006+A1:2009, EN 61000-6-2:2005
In addition, RISE SMP Svensk Maskinprovning AB, ,
Sweden, has certified conformity with annex V of the
Council's Directive of May 8, 2000 "relating to the noise
emissions in the environment" 2000/14/EC. The
certificates has the number: 01/012/012.
For information relating to noise emissions, see
Technical data on page 20
.
Huskvarna, 2018-08-08
Pär Martinsson, Development manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation.)
22
788 - 002 - 25.02.2020
788 - 002 - 25.02.2020 23
www.husqvarna.com
Original instructions
1140930-26
2020-03-02
… 20 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna 530iBX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna 530iBX in de taal/talen: Engels als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Husqvarna 530iBX

Husqvarna 530iBX Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 124 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info