734169
105
Verklein
Vergroot
Pagina terug
1/606
Pagina verder
GENERAL SAFETY PRECAUTIONS
English 105
Electrical safety
It is recommended that you use a Residual Current
Device (RCD) with a tripping current of not more than
30mA. Even with a RCD installed 100% safety cannot
be guaranteed and safe working practice must be
followed at all times. Check your RCD every time you
use it.
Before use, examine the cable for signs of damage or
ageing. If the cable is found to be defective, take the
product to an Authorized Service Center and have the
cable replaced.
Do not use the product if the electric cables are
damaged or worn.
Immediately disconnect from the mains electricity
supply if the cable is cut, or the insulation is damaged.
Do not touch the electric cable until the electrical
supply has been disconnected. Do not repair a cut or
damaged cable. Take the product to an Authorised
Service Centre and have the cable replaced with a
genuine spare cable.
Always make sure that the cable/extension cord is
kept behind the user, ensuring that it does not create
a source of danger for the user or for other persons,
and check that it cannot be damaged (by heat, sharp
objects, sharp edges, oil, etc);
Position the cable so that it will not be caught on
branches and the like, during cutting.
Always switch off at the mains before disconnecting
any plug, cable connector or extension cable.
Switch off, remove plug from the mains and examine
electric cable for damage or ageing before winding
cable for storage. Do not repair a damaged cable.
Take the product to an Authorised Service Centre and
have the cable replaced.
Remove the plug from the mains before leaving the
product unattended for any period.
Always wind cable carefully, avoiding kinking.
Use only on AC mains voltage shown on the product
rating label.
The chainsaw is double insulated to EN60745-1 & 2-
13.
Make sure your extension cord is in good
condition. Inspect extension cord before use and
replace if damaged. Do not use a damaged cord.
Cord insulation must be intact with no cracks or
deterioration. Plug connectors must be undamaged.
Damaged extension cords increase the risk of electric
shock.
Residual Current Device (RCD) protection should
be provided on circuit or outlet to be used.
Receptacles are available having built-in RCD
protection and may be used for this measure of safety.
Inspect chain saw cords periodically and if damaged,
have repaired by an authorized service dealer.
Cables
Extension cables are available from your local
Approved Service Centre.
Only use approved extension cables.
Extension cables and leads should only be used if
they are designed for outdoor use and comply with
H07 RN-F or IEC 60245 designation 66.
Before using a new chain saw
Please read this manual carefully.
Fill with chain oil. See instructions under the heading
Filling with chain oil.
Do not use the chain saw until sufficient chain oil has
reached the chain. See instructions under the
heading Lubricating cutting equipment.
Check that the cutting equipment is correctly fitted
and adjusted. See instructions under the heading
Assembly.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
This saw is intended for use between the
temperatures of -20°C (-4°F) and +40°C (104°F).
!
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
WARNING! A chain saw is a dangerous
tool if used carelessly or incorrectly and
can cause serious, even fatal injuries. It
is very important that you read and
understand the contents of this
operator’s manual.
!
WARNING! This machine produces an
electromagnetic field during operation.
This field may under some
circumstances interfere with active or
passive medical implants. To reduce the
risk of serious or fatal injury, we
recommend persons with medical
implants to consult their physician and
the medical implant manufacturer before
operating this machine.
!
WARNING! Long term inhalation of chain
oil mist and dust from sawdust can
represent a health risk.
105

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna 420EL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna 420EL in de taal/talen: Alle talen als bijlage per email.

De handleiding is 50,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info