55
Depth Alarm
Depth Alarm sounds when the depth becomes equal to or less
than the menu setting.
T
o change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting.
(OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)
Fish ID Alarm
Fish ID Alarm sounds when the FishFinder detects fish that
correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+™ is on.
T
o change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting.
(Off, All, Large/Medium, Large, Default = Off)
Low Battery Alarm
Low Battery Alarm sounds when the input battery voltage is
equal to or less than the menu setting. The battery alarm will only sound for the battery that is
connected to the FishFinder. The Low Battery Alarm should be set to warn you when the battery
voltage drops below the safety margin that you have determined. For instance, if you are running
a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before
the battery voltage drops too low for it to be used to start your main, gasoline-powered engine.
T
o change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm
setting. (Off, 9.0V - 13.5V, Default = Off)
All
Large/Medium
Large
For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will
sound when a large-sized fish is detected.
54
Alarms Menu Tab
From any view, press the MENU key twice to access the Main
Menu System. The Alarms tab will be the default selection.
NOTE: When an alarm is triggered, you can silence it by pressing
any key. The alarm will be silenced, and will not be triggered
again until a new instance of the alarm condition is detected.
Alarms Menu
