604917
28
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
AU28
Installation
Single Cable Distribution enables the delivery of broadcast programming over a single cable to multiple users
eliminating the numerous cables required to support other electronics devices.
If you are using more than one satellite receiver, set one receiver at a time and turn off the others while setting.
Refer to the satellite antenna manual for details.
> Settings > Installation
1 Press the RED button and select SCD Antenna. Select OK to save and exit.
2Select Search Channels and press the OK button.
3 Select SCD Setting and press the OK button to set the channel(band) and frequency for this receiver.
Tuner1: Select from Channel 1~8.
• Frequency: The frequency is set based on the channel of tuner1.
Select OK.
4Select a satellite figure and press the OK button.
Satellite: The satellite is xed.
LNB Frequency: Select the LNB frequency.
Test Transponder: Check the signal status of each transponder and select the one with the best quality.
Select OK.
5Select Transponder under the activated satellite figure and press the OK button.
Select a value in the transponder list.
6Repeat the two steps above to set more satellites.
7Select Search and press the OK button. The found channels will be listed.
8When the search is completed, the channel switches automatically to the most recently tuned channel.
Note:
• Select User Dene to enter the options directly.
• Select Stop and press the OK button to stop the channel search.
All channels will be deleted if you change the antenna type.
The default password is 1234. If you have forgotten your password, please contact HUMAX Australia Customer
Service.
Search Channels [SCD Antenna]
MENU
Satellite
LNB Frequency
LNB Power
22Khz Tone
Test Transponder
Optus C1/D3 (156.0E)
Universal
On
O
12722, H, 22000, 2/3
1
2
3
4
Antenna Type
OK
Cancel
Fixed Antenna
SCD Antenna
Motor Antenna
Select your antenna type.
Antenna Type
Settings Installation (SCD Antenna)
OK
Search
Search
SCD Setting
Cancel
Search Option
Search Option
Transponder
-
Position 1
Satellite
-
SCD Setting
Tuner 1
Frequency
Channel 1
1210
Channel 1
Settings
Installation (SCD Antenna) Search Channels
Settings Installation (SCD Antenna) Search Channels
Settings Installation (SCD Antenna) Search Channels
Satellite Setting
OK
Cancel
Search Option
Strength
Quality
75%
80%
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Humax HDR-1003S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Humax HDR-1003S in de taal/talen: Engels als bijlage per email.

De handleiding is 7,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info