604894
102
Verklein
Vergroot
Pagina terug
1/119
Pagina verder
The default password is 0000.
Users Manual
FOXSAT-HDR
Satellite HD Digital Television Recorder
GB1
User’s Manual
Notice
Thank you for purchasing a Humax Foxsat-HDR
(Digital Television Recorder) Your Foxsat-HDR supports
freesat+ provided by the freesat service.
Freesat+ explained:
Accurate Recording – the product will track the start and end times of scheduled recordings meaning
the recording will start and stop at the times sent by the broadcasters. If a programme starts early or
runs late the record time will automatically be adjusted to record the whole programme*.
Series Recording – if a programme you wish to record is in a series, you can now record the whole
series.
Schedule Tracking - If the programme changes to a di erent time or day the changes will be detected
and the programme will still record.
Alternate Instances - if a scheduled recording(s) overlap with other programmes already set to
record, you will be given the option to record one of the programmes if it is repeated.
Split Recordings - if a programme has two parts split by another programme in the Guide (e.g. a  lm
divided in to two parts by a News programme) both parts will record.
Note: The above freesat+ features are available on channels where the correct and accurate data is being
broadcast. Some channels may not support some/all services.
Accurate recording is only available when the Record > Early Start Time & Late End Time options are set
to On Time.
Notice
GB2
User’s Manual
Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely
install, use and maintain the product at maximum performance. Keep this user’s manual next to your
product for future reference. The information in this user’s manual is subject to change without notice.
Copyright (Copyright © 2010 HUMAX Corporation)
Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except
approval of ownership of copyright and copyright law.
Warranty
The warranty does not cover parts which may become defective due to misuse of the information
contained in this manual.
Trademarks
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Warnings, Cautions and Notes
Throughout the whole manual, pay special attention to the following marks that indicate hazardous
situations.
• Warning
Indicates a hazardous situation which could result in serious injury.
• Caution
Indicates a situation which could damage the equipment or other apparatus.
• Note
Indicates additional information to make the user aware of possible problems and information of any
importance to help understand, use and maintain the installation.
Meaning of Symbols
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts
inside. Refer servicing to quali ed service personnel.
This symbol indicates dangerous voltage inside the product that presents a risk of electric
shock or personal injury.
This symbol indicates important instructions accompanying the product.
Notice
GB3
User’s Manual
Instruction about the WEEE’ Symbol
This product should not be disposed with other household wastes at the end of its working
life. Please separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. This will prevent possible harm to the environment
or human health from uncontrolled waste disposal.
• Domestic users:
Please contact either the retailer where you purchased this product or their local government o ce
for details of where and how they can take this item for environmentally safe recycling.
• Business users:
Contact your supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
GB4
User’s Manual
This product has been manufactured to comply with international safety standards. Please read the
following safety precautions carefully.
Safety Instructions and Precautions
1. MAINS SUPPLY
90-250V a.c., 50/60Hz
Operate this product only from the type of power supply indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your local power company.
Disconnect the product from the mains before you start any maintenance or installation procedures.
2. OVERLOADING
Do not overload a wall outlet, extension cord or adapter as this may result in electric  re or shock.
3. LIQUID
The product should not be exposed to liquid of any kind. In addition, no objects  lled with liquid should be
placed on the apparatus.
4. CLEANING
Disconnect the product from the wall outlet before cleaning.
Use a light damp cloth (no solvents) to dust the product.
5. VENTILATION
The slots on top of the product must be left uncovered to allow proper air ow into the unit.
Do not stand the product on soft furnishings or carpets.
Do not stack electronic equipments on top of the product.
6. ATTACHMENTS
Do not use any unsupported attachments as these may be hazardous or cause damage to the product.
7. CONNECTION TO THE SATELLITE DISH LNB
Disconnect the product from the mains before connecting or disconnecting the cable from the satellite dish.
Failure to do so can damage the LNB.
8. CONNECTION TO THE TV
Disconnect the product from the mains before connecting or disconnecting the cable from the TV. Failure to do
so can damage the TV.
9. EARTHING
The LNB cable must be earthed to the system earth for the satellite dish.
10. LOCATION
Place the product indoors to avoid exposing it to lightning, rain or sun.
Do not place it near a radiator or heat register.
We recommend that the product has 10 cm clearance from any other appliances susceptible to electromagnetic
in uences, such as a TV or a VCR.
Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar
surface.
If you place the product on a rack or a bookcase, ensure that there is adequate ventilation and that you have
followed the manufacturer’s instructions for mounting.
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall.
A falling product can cause serious injury to a child or adult, and serious damage to the appliance.
Safety Warning
Safety Warning
GB5
User’s Manual
11. LIGHTNING, STORM OR NOT IN USE
Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left
unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and
power-surges.
12. EXTRANEOUS OBJECTS
Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or
damage parts.
13. REPLACEMENT OF PARTS
When replacement of parts is required, be sure the service technician uses replacement parts speci ed by the
manufacturer or those that have the same characteristics as the original part. Unauthorised substitution may
result in additional damage to the unit.
Warning
1. To avoid damage of the power cord or plug;
Do not modify or process the power cord or plug arbitrarily.
Do not bend or twist the power cord.
Make sure to disconnect the power cord holding the plug.
Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting.
The mains plug, as a disconnection device, shall remain readily accessible by the user.
2. To avoid electrical shock;
Do not open the main body.
Do not insert metal or in ammable objects inside the product.
Do not touch the power plug with wet hands.
Disconnect the power cord in case of lightning.
3. To avoid damage of product;
Do not use the product when it is out of order. If you continue to use the product when defective, serious
damage can be caused to it. Make sure to contact your local retailer if the product is out of order.
4. Hard Disk Drive
Do not move the product or turn the power o suddenly while the hard disk drive is running.
The company shall not be liable for any corruption of data on the hard disk drive caused by the carelessness or
misuse of users.
5. Standby Mode
It is recommended to leave the product in Standby mode during long periods when not being used e.g. Over
night. The product will record any schedules set while in Standby mode.
GB6
User’s Manual
Contents
1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB8
1.1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB8
1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB9
1.3 Common Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB10
1.4 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB11
1.5 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB12
1.6 Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB15
2. Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB16
2.1 Connecting the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB16
2.2 Connecting the TV and VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB17
2.3 Powering On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB21
3. First Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB22
3.1 User Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB22
3.2 freesat detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB22
3.3 Postcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB23
3.4 Search Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB23
3.5 Result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB24
3.6 Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB24
4. Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB25
4.1 Switching Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB25
4.2 Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB25
4.3 Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB25
4.4 Wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB26
4.5 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB26
4.6 Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB27
4.7 Text and Interactive Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB27
4.8 Programme Information (i-plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB28
4.9 Option List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB29
5. Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB30
5.1 My TV List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB30
5.2 Favourite List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB31
5.3 HD TV List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB31
5.4 Genre List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB32
5.5 Non-freesat Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB32
6. TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB33
6.1 Using TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB33
6.2 List Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB35
6.3 Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB35
6.4 Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB36
Contents
GB7
User’s Manual
7. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB37
7.1 TV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB37
7.2 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB40
7.3 Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB41
7.4 Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB42
7.5 Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB44
7.6 Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB45
7.7 STB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB46
8. Edit Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB47
8.1 Edit Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB47
8.2 Edit Favourite List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB49
8.3 Edit Customisable Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB50
9. Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB51
9.1 Freesat Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB51
9.2 Manual Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB52
9.3 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB53
9.4 Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB54
10. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB55
10.1 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB55
10.2 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB55
10.3 HDD Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB56
10.4 Common Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB56
11. Media List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB57
11.1 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB57
11.2 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB60
11.3 Music. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB61
11.4 Photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB63
12. Personal Video Recorder (PVR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB65
12.1 Play bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB65
12.2 Time Shifted Recording (TSR) and Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB66
12.3 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB67
12.4 Bookmark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB69
13. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB70
13.1 OTA (Over the Air). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB70
14. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB71
14.1 Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB71
14.2 Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB72
14.3 Error Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB74
14.4 Speci cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB75
14.5 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB77
14.6 Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB79
14.7 Remote Control Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB80
14.8 OPEN SOURCE SOFTWARE NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB110
GB8
User’s Manual
This chapter provides detail instructions on the product and its accessories.
1.1 Package Contents
Please check all package contents before using your product.
Note:
Faults may occur if the remote control is left without battery for a long time. Always keep the battery
inserted in the remote control.
Package contents may vary according to area.
Caution:
The company shall not be liable for problems caused by changing hard disk drive by user.
1. Before Using the Product
User’s Manual
Quick Start Guide
User’s Manual
Remote Control
SCART Cable
Batteries
HDMI Cable
Quick Start Guide
RCA Cable
1. Before Using the Product
GB9
User’s Manual
1.2 Front Panel
1. STANDBY BUTTON
Switches between operation and standby modes.
2. TV/RADIO BUTTON
Switches between TV and radio modes.
3. MENU
Displays the main menu.
4. GUIDE
Displays the programme guide.
5. OK
Selects a menu or con rms the selected operation.
6. ARROW BUTTONS
/: Replays or skips scenes.
/: Moves the TV/radio channel up or down.
7. BACK
Closes and returns to the previous menu and screen.
8. USB Port
Connect a USB Pen drive or external USB HDD (for archiving recordings, or transfer of MP3 or JPEG
les).
9. CI-MODULE SLOT
A slot for a CI-Module. Module is not supplied.
Note: The front of the product is subject to change without notice.
1 2 3 4 5 7 986
1. Before Using the Product
GB10
User’s Manual
1.3 Common Interface
Although some TV and radio services are free to air, others are available on a subscription basis and can
only be enjoyed via a Conditional Access component.
Inserting a CI (with Smartcard)
A CI-Module looks like a PC map (PCMCIA) for laptops. There are di erent kinds of CI-Modules, suitable for
di erent coding systems; Irdeto, Conax and more. Additionally to the CI-Module, a Smartcard is needed to
decode the channels.
1. Open the right-hand  ap on the front panel of the product to expose the card slot.
2. Follow the instructions of the module and insert the Smartcard into the CI-Module.
3. Keep the CI-Module (with the Smartcard) horizontal.
4. Insert the CI-Module into the slot.
CI-Module
Smartcard
1. Before Using the Product
GB11
User’s Manual
1.4 Rear Panel
1. LNB 1 IN, LNB 2 IN
Connects a satellite antenna cable. Up to
two cables can be connected.
2. LNB 1 OUT
Connects another digital satellite receiver.
3. AUDIO
Connects to the TV or VCR using an RCA
cable.
4. VIDEO
Connects to the TV or VCR using an RCA
cable.
5. TV SCART
Connects to the TV using a TV SCART cable.
6. VCR SCART
Connects to the VCR or DVD using a VCR
SCART cable.
7. SPDIF
Connects to the audio system using an
S/PDIF cable. (digital audio)
8. HDMI
Connects to the TV using an HDMI cable.
9. USB Port
Connect a USB Pen drive or external USB
HDD (for archiving recordings, or transfer
of MP3 or JPEG  les).
10. ETHERNET
Ethernet port (for future use).
11. ON/OFF
Powers on/o .
Note:
The rear panel of the product is subject to change without notice.
The LNB ratings of LNB 1 and LNB 2 are di erent.
LNB 1 IN: Max. 13/18V 250mA, LNB 2 IN: Max. 13/18V 500mA
1 2 3 6 7 8 9 10 114 5
1. Before Using the Product
GB12
User’s Manual
1.5 Remote Control
Note: The remote control of the product is subject to change without notice.
1. MUTE
Mutes or unmutes the audio temporarily.
2. PVR/TV/DVD/AUDIO
Changes the mode.
3. LIST
Display the channel list.
4. PLAYBACK CONTROL BUTTONS
a. PLAY
Plays at normal speed or resumes.
b. PAUSE
Pauses the live programme or recording.
c. STOP
Stops a recording or goes to the live programme.
d. RECORD
Records programme.
e. FAST BACKWARD
Rewinds at high speed. Each time you press this
button, the rewind speed is increased.
f. FAST FORWARD
Fast forwards at high speed. Each time you press
this button, the fast forward speed is increased.
g. PREVIOUS (REPLAY)
Goes to the previous scene.
h. NEXT (SKIP)
Goes to the next scene.
5. STANDBY
Switches between operation and standby
modes.
6. NUMERIC(0-9) BUTTONS
Enters a TV/radio channel number or menu
option number.
7. MENU
Displays the main menu.
1
5
2
3
6
7
a
b
c
d
e
f
g
h
4
1. Before Using the Product
GB13
User’s Manual
8. COLOUR BUTTONS(R/G/Y/B)
Select the colour keys for interactive
applications.
i. RED
Displays the channel list in normal viewing mode.
j. GREEN
Displays the favourite channel list in normal
viewing mode.
k. YELLOW
Displays the HD TV channel list in normal viewing
mode.
l. BLUE
Displays the genre channel list in normal viewing
mode.
9. MEDIA
Displays the media list.
10. ARROW BUTTONS
Changes the channel or moves the cursor up,
down, left or right.
11. EXIT
Exits all On-Screen Display (OSD) screens.
12. i (INFORMATION)
Displays the channel and programme
information.
13. GUIDE
Displays the programme guide.
14. OK
Selects a menu or con rms the selected
operation.
15. BACK
Returns to the previous channel.
16. OPT+
Displays the channels attributes while watching
a programme.
i
j
k
l
9
10
8
11
15
16
13
14
12
1. Before Using the Product
GB14
User’s Manual
m
n
17
19
18
20
22
21
23
25
24
26
27
2928
17. VOLUME
Adjusts the audio volume.
18. AUDIO
Displays the audio list.
19. TEXT
Enters the digital text service.
20. SCHEDULE
Displays the schedule in programme guide.
21. SOURCE
Controls the output of TV SCART.
22. BOOKMARK
m. ADD BOOKMARK
Saves the current viewing position as a bookmark
during playback.
n. BOOKMARK LIST
Displays the list of saved viewing positions during
playback.
23. P+/P-
Changes the channel or page.
24. SUB
Displays the subtitle language list.
25. TV/RADIO
Switches between TV and radio modes.
26. SLOW
Plays the programme in slow motion.
27. WIDE
Sets the display format.
28. SLEEP
Sets the sleep time.
29. V-FORMAT
Changes the resolution of video.
1. Before Using the Product
GB15
User’s Manual
1.6 Remote Control Batteries
1. Press down the top of the battery cover and slide the cover o .
2. Insert the new batteries. Make sure the plus (+) ends meet the plus markings on the battery case.
3. Slide the cover back into place.
i
GB16
User’s Manual
2. Connections
This chapter describes how to connect your product to the TV with the particular equipments for gaining
optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other
devices. Select the most appropriate procedure depending on the equipment you have.
Note: If you encounter any problems setting up your product, please contact your local retailer or Humax
Customer Helpline.
2.1 Connecting the Antenna
You can select one of the following antenna connections depending on the equipment you have. The
product has two antenna modes according to setting.
Change this to the  rst option.
1. Connecting Two Satellite Cables
Connect the two cables from your satellite dish to the LNB 1 IN and
LNB 2 IN connections on the rear of the product.
Note: To maximize the use of all PVR features FOXSAT-
HDR provides, connecting with two cables from
the same satellite dish is strongly recommended.
This will allow you to:
View and record di erent channels
Record two channels at the same time
2. Single Cable Using Loop Through
1. Connect the cable from your satellite dish to LNB 1.
2. Connect a cable from the LNB 1 OUT to the LNB 2 IN connection.
Note:
If connecting with a single cable using loop through, you will
have limited functionality.
While recording a channel you will be limited to the second
channel you can view.
Visit www.humaxdigital.com/freesat for further information.
When using a Motorised System, SCD Antenna (also known as
Unicable), or SMATV please connect the cable to LNB 1.
ASTRA 1 19.2E
Twin LNB
ASTRA 1 19.2E
Single LNB
2. Connections
GB17
User’s Manual
2.2 Connecting the TV and VCR
1. Using HDMI Cable
The HDMI connection, a special all-digital interface that provides the highest picture quality, is suitable for
Digital TV. If the TV has a HDMI input, connect the product & TV using a HDMI cable as follows.
Important:
When connecting the product to a TV with a HDMI cable no other connection is required.
If you connect using a HDMI cable please switch your TV set to the correct channel/input for HDMI
(refer to your TVs manual for details).
HDMI Cable
HDMI
2. Connections
GB18
User’s Manual
2. Using DVI Connector
The DVI connection using an HDMI to DVI converter is suitable for Digital TV. If the TV has the DVI input
connector only, connect the product to the TV with an HDMI cable using an HDMI to DVI converter as
follows.
When equipped with an A/V receiver,
1. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI
to DVI converter.
2. Connect the DVI converter to the TV.
3. Connect the product and the Dolby Digital decoder using an S/PDIF cable.
Important: If you connect using a DVI cable please switch your TV set to the correct channel/input for
the HDMI (refer to your TVs manual for details).
HDMI Cable
2. Connections
GB19
User’s Manual
When there is no A/V receiver available,
1. Connect the product and the TV using an RCA cable.
2. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI
to DVI converter.
3. Connect the DVI converter to the TV.
Note: You can also connect the product to the TV using the 3.5 Stereo Jack Cable to 2 RCA Y Cable.
Caution: DO NOT CONNECT TO HEAD PHONE CONNECTOR ON TV!
Important: If you connect using a DVI cable please switch your TV set to the correct channel/input for
the DVI connection (refer to your TVs manual for details).
HDMI Cable
Y Cable (1stereo, 2RCA)
2. Connections
GB20
User’s Manual
3. Using SCART Cable
A SCART cable connection is recommended for analogue TV or VCR.
1. Connect the product and the TV using a SCART cable.
2. Connect the product and the VCR using a SCART cable.
Important: If you connect using a SCART cable please switch your TV set to the correct channel/input for
the scart connection (refer to your TVs manual for details).
VCR SCART
TV SCART
SCART Cable
SCART Cable
2. Connections
GB21
User’s Manual
2.3 Powering On
1. Connect the power cord of the product to a wall outlet.
2. Ensure the ON/OFF switch at the rear of the product is switched to ON.
3. Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front
of the product.
GB22
User’s Manual
3. First Installation
When powering on your product for the  rst time after purchase, the First Time Installation will appear.
If nothing appears on your TV set please check the following:
Your TV set is switched ON.
Please check that the cables between the TV and product are connected correctly.
Your TV set is switched to the correct channel/input for the connection method/cable you are using.
Tip:
The default password is 0000.
If you have forgotten your password, please contact Humax Customer Support.
3.1 User Settings
User Settings allows you to set the language, screen
ratio, display format and resolution.
Select the value for Preferred Language,
Screen Ratio, Display Format and Resolution.
Select Next and press the OK button.
Note: Not all resolutions may work (or be available)
with the type of connection (or TV Set) your
are using. If you experience problems please
select a di erent resolution.
3.2 freesat detection
1. Con rm the satellite cable(s) are connected and
press the OK button.
2. Please wait until the freesat detection is complete.
3. When the freesat signal is detected, press the OK
button to go to the next step.
Note:
If the freesat detection fails please check that the
satellite cable(s) are connected correctly.
For further help see the 14. Trouble Shooting
section of the manual.
Warning: To prevent electric shock, always POWER
OFF all devices during setting up the
connection.
3. First Installation
GB23
User’s Manual
3.3 Postcode
Enter your full postcode (including a space) using the
NUMERIC(0-9) buttons on the remote control.
To use on-screen keyboard, press the OPT+ button.
Press the 1 button to enter a space.
Press OK after entering your postcode.
Note: Use the left arrow on the remote to delete an
incorrect entry.
If the Invalid Postcode message appears please
re-enter your postcode.
If your postcode is correct then see the 14. Trouble
Shooting section.
3.4 Search Channels
Search Channels will activate and the results will
appear.
To stop the channel search, select Stop and press the
OK button. Select Save and press the OK button to go
to the next step.
3. First Installation
GB24
User’s Manual
3.5 Result
After all setting is complete, you can view the result
screen.
Select Finish and press the OK button to complete the
rst installation.
3.6 Installation Checklist
Before using the product, please make sure that you have completed the following steps.
Step Page Done?
Is the antenna connected correctly? GB15
Is the product connected to your TV? GB16
Is the power cord plugged in the wall outlet? GB20
Is the product in operation mode (not Standby mode)? GB20
Have you performed channel search in the  rst installation? GB21
Note: If you exit the  rst installation without fully completing the channel searching procedure, you may
not have all of the channels available. Please select the Freesat Tune option in the Setup menu to
search for the channels again.
For information on the latest channels from freesat visit www.freesat.co.uk.
GB25
User’s Manual
This chapter describes the basic functions the product provides such as switching channel, volume control
and other common features.
4.1 Switching Channel
You can change channels by:
• Pressing the P-/P+ buttons
Entering the channel number using the NUMERIC(0-9) buttons.
Press the TV/RADIO button to switch between TV and radio channels.
Note: You can also change channels using the Channel list (LIST) or Programme Guide (GUIDE).
4.2 Volume Control
You can adjust the audio volume. Press the V-/V+
button to adjust the audio volume. Press the MUTE
button to stop the audio temporarily.
Note: The mute function remains set while you
switch channels.
4.3 Resolution
You can set the resolution of the screen. Press the
V-FORMAT button while watching a programme. The
current resolution will be displayed.
Each time you press the V-FORMAT button, the
resolution changes in the following sequence:
576i
576p720p1080iOriginal.
Note: Not all resolutions may work (or be available)
with the type of connection (or TV Set) your
are using. If you experience problems please
select a di erent resolution.
4. Basic Operation
4. Basic Operation
GB26
User’s Manual
4.4 Wide
You can set the display format.
Press the WIDE button while watching a programme
to change the display format.
Each time you press the WIDE button, the display
format changes.
Note: For more information about display format,
refer to 7.1.7 Display Format.
4.5 Audio
If multiple audio languages/options are available the you can select the one you require from the audio
list.
1. Press the AUDIO button.
2. Use the arrows to select the audio option you
require.
3. Select the audio direction (left, right, stereo) using
the
/ buttons.
4. Press EXIT to close.
Note:
You can also change between the audio options
by pressing the AUDIO button multiple times.
For Dolby Digital broadcasts it is not possible to
change the direction.
4. Basic Operation
GB27
User’s Manual
4.6 Subtitle
If multiple subtitle languages/options are available you can select the one you require from the subtitle
list.
1. Press the SUB button.
2. Use the arrows to select the subtitles you require
and press OK.
Note:
You can also change between the subtitle options
be pressing the SUB button multiple times.
If no subtitles are available a message will inform
you on screen; not all programmes broadcast will
contain subtitle information.
4.7 Text and Interactive Services
If your chosen channel has digital teletext features, you can access them. Teletext services often load
automatically shortly after the digital teletext window is displayed. In which case, simply follow the on
screen instructions(press color buttons).
1. Press the TEXT button to access digital teletext.
2. Press the TEXT button again to return to normal viewing.
3. Press the P+/P- button to exit this service.
Note:
Interactive service (MHEG) is not available when subtitles are displayed. The channel and volume
cannot be controlled using the arrow buttons in interactive mode.
For information regarding the Digital Text or interactive services available please contact the
broadcaster. Not all channels on freesat will provide these services.
4. Basic Operation
GB28
User’s Manual
4.8 Programme Information (i-plate)
The i-plate is always displayed for a certain period of time whenever you switch channels. You can view
the programme information by pressing the i button while watching a programme. Press the EXIT button
to hide the i-plate.
After switching to a channel, press the
/ button to display navigation mode.
Press the
/ button to view the previous/next programme information.
Press the
/ button to view the programme information of other channels.
1. General Information
The general information is displayed on the screen as the following.
Note: If programme information is not available on all channels please access the GUIDE to allow the
information to download fully.
1. Next/previous channel
2. Channel number and name
3. Programme name
4. Icons
Displayed only when the channel is a locked channel.
Displayed only if the programme is reserved for watching.
Represents parental level. Indicates the minimum level of age for viewing the
programme.
Displayed only when there is any teletext information.
Displayed only when subtitle information is available.
Displayed only when the channel provides HD programmes.
Displays the resolution of the current programme.
Displayed only when the programme is broadcast in Dolby Digital.
Displayed only when audio description is available.
Displayed only when the interactive service is available.
Displayed only when there is any guidance information.
21
5
3
87
4
6
HD
1080i
Digital
AD
4. Basic Operation
GB29
User’s Manual
5. Current time & date
6. Programme broadcasting time and progress bar: Displays programme playing time and progress bar.
7. Group name: Displays the group the channel belongs to.
8. Previous/Next programme information: Displayed if previous/next programme information is
provided. Press the
/ button to display previous/next programme information.
Note: If there is no programme information available, programme information is not displayed.
2. Detailed Programme Information
You can see the detailed information about the current programme.
Press the i button when the i-plate is displayed to view detailed information. Press the i button once more
to hide the i-plate.
Note: If the detailed programme information is over one page, use the
/ button to move to the
previous or next page.
4.9 Option List
You can view and con rm detailed information about the current channel and change the information if
necessary.
Tip: The default password is 0000.
1. Press the OPT+ button.
2. To add the channel to the favourite group, select
Favourite Group. Select the group using the
/
button and press the OK button.
3. To lock the channel, select Lock and press the OK
button.
4. To delete the channel, select Delete and press the
OK button. A popup will appear. Select Ye s and
press the OK button.
5. To rename the channel in non-freesat channel
mode, select Rename and press the OK button.
Enter the name directly using the keyboard on the
screen. Press the YELLOW button to complete.
Note: In non-freesat channel mode, you cannot add the channel to the favourite group.
GB30
User’s Manual
This chapter will help you use the various channel lists available. To display the channel list press the
LIST button while viewing a programme.
Four types of channel lists are available for quick and easy navigation.
My TV (RED)
The list of all TV channels.
The list of all radio channels.
The list of the recently viewed channels.
Favourite (GREEN) The list of the favourite channels in  ve groups.
HD TV (YELLOW) The list of all HD TV channels.
Genre (BLUE) The list of channels including the sports, drama, movie and other genres.
Note:
• Press the EXIT button to remove the channels list.
The favourite channel list will only be available after favourites groups have been setup.
To sort the channels numerically or alphabetically press i button while the channel list is on screen.
5.1 My TV List
My TV List is the list of all channels available including TV, radio and recent channels.
1. Press the LIST button while watching a programme to display the channel list.
2. Press the RED button to display My TV if not
already selected.
3. Select the channel you wish to view and press the
OK button. You can also enter the channel number
using the NUMERIC(0-9) buttons.
4. Press the RED button again and select a sub group
using the
/ button.
5. Select a channel and press the OPT+ button.
To add the channel to the favourite group, select
Favourite Group. Select the group using the
/
button and press the OK button.
To lock the channel, select Lock and press the OK
button.
To delete the channel, select Delete and press the
OK button. A popup will appear. Select Ye s and press the OK button.
Note: You can switch between TV and radio by simply pressing the TV/RADIO button.
5. Channel List
5. Channel List
GB31
User’s Manual
5.2 Favourite List
Favourite List is the list of the favourite channels you can select yourself from the entire channel list. There
are  ve favourite groups in total.
1. Press the LIST button while watching a
programme.
2. Press the GREEN button to display the list of
favourite groups.
3. Press the GREEN button again and select a sub
group using the
/ button.
5.3 HD TV List
HD TV List is the list of all HD TV channels.
1. Press the LIST button while watching a
programme.
2. Press the YELLOW button to display the HD TV list.
5. Channel List
GB32
User’s Manual
5.4 Genre List
Genre List allows you to view the channels by genre (e.g. Movies, Sports, Entertainment, etc).
1. Press the LIST button while watching a programme.
2. Press the BLUE button to display the genre list.
3. Press the BLUE button again and select a sub group
using the
/ button.
5.5 Non-freesat Channel List
Four types of channel lists are provided for quick and easy channel search in the non-freesat channel list.
My TV (RED)
The list of all TV channels.
The list of all radio channels.
The list of HD TV channels.
The list of the recently viewed channels.
Favourite (GREEN) The list of the most viewed channels.
Satellite (YELLOW) The lists of channels classi ed by satellites.
Scramble (BLUE) The lists of channels classi ed by CAS types.
GB33
User’s Manual
The TV GUIDE displays the programmes for the next 7 days sent by the broadcaster.
Note: Press the GUIDE or EXIT button to exit the TV guide screen.
6.1 Using TV Guide
You can view the programme information of all channels in time and date order.
1. Press the GUIDE button.
2. Select the channel genre using the
/ button and press the OK button.
3. Press the RED button.
1. Table Guide
1. Move to the previous/next programme within the
same channel using the
/ button.
2. Move to another channel using the
/ button.
If the contents are more than one page, use the
P-/P+ button to skip to the next page. Enter the
number of the channel you wish to move using
the NUMERIC(0-9) buttons.
3. Jump back/ahead two hours using the FAST
BACKWARD/FAST FORWARD button.
4. Move to the previous/next day using the
PREVIOUS/NEXT button.
5. If the programme is currently on press the OK
button to view the programme.
6. If the programme is on in the future you can
reserve it to view or record. Press the OK button on the highlighted programme and select from the
following:
Record Whole Series This option will appear if the programme is in a series; select this option
to record this programme and all future programmes within the same
series.
Record One Programme Select this option to record this programme only.
Watch Select this option is you wish to view this programme (Not record).
7. Select a reserved programme and press the OK button to cancel the reservation.
8. Press the OPT+ button to display the channel genre and choose another genre.
6. TV Guide
GB34
User’s Manual
2. Instant Reservation
1. Select a programme in the EPG and press the RECORD button on the remote. The selected
programme only will be reserved to record.
2. To cancel the reservation, select the programme and press the STOP button. The reservation will be
cancelled immediately.
Note:
You cannot reserve new programmes when the HDD is already full. Please delete another recorded
programme.
• Press the i button to view the programme information.
In non-freesat mode, you cannot select the channel genre. Select the group using the OPT+ button.
You cannot reserve the programmes in non-freesat mode.
6. TV Guide
GB35
User’s Manual
6.2 List Guide
1. Press the GREEN button.
2. You can view the programme information for the
next 7 days. The features are similar as in 6.1 Table
Guide.
Note: Press the OPT+ button to go to channel genre.
6.3 Schedule
Schedule displays the list of the programmes you have reserved. You can modify, delete or make manual
reservations.
1. Press the YELLOW button to display the schedule
of reservations.
2. Select a reservation and press the OPT+ button to
delete the reservation.
Note:
• Press the LIST button to sort the list in time or
alphabetical order.
You cannot reserve programmes in non-freesat
mode.
1. Editing Reservations
1. Select a reservation you want to edit and press the YELLOW button. The reservation popup will
appear.
2. Select Channel and press the OK button to display the channel list. Select the channel.
3. Select Date and press the OK button to view the calendar. Select the date.
4. Select Start Time or End Time and enter the time using the NUMERIC(0-9) buttons.
5. Select Repeat and change the repeat frequency using the
/ button.
6. Select Mode and select Record or Watch.
7. Select OK and press the OK button.
6. TV Guide
GB36
User’s Manual
2. New Reservation
1. Select the blank reservation at the bottom of the schedule list and press the OK button.
2. The reservation popup will appear. Enter the channel number, date, start/end time, repeat frequency
and mode and then press the OK button.
Note:
Reservations for deleted channels or past programmes are automatically deleted.
If the channel number has changed the reservation will need to be setup again.
6.4 Find
Find allows you to search for programmes by entering a keyword (part or all of the programme name) and
selecting the genre, time and day of the programme.
1. Press the BLUE button.
2. Enter the keyword, genre, time & day of the
programme and select Search and then press the
OK button.
3. The search result of the entered values will appear.
4. To reserve a programme, select a future
programme and press the OK button.
1. Search by Keyword
1. Press the OK button while the cursor is on Keyword.
2. Keyword List will appear. Select <NEW> and press the OK button to enter a new keyword.
3. A keyboard will appear. Enter the keyword.
4. Press the YELLOW button to complete.
2. Search by Genre
1. Press the OK button while the cursor is on Genre.
2. The list of genres will appear. Select the genres and press the OK button. You can select up to two
genres.
3. Search by Time and Day
1. Press the OK button while the cursor is on Time & Day.
2. The time & day popup will appear. Select the time and day using the OK or
/ button.
3. Select OK and press the OK button.
GB37
User’s Manual
7. Settings
In this chapter you can set options for TV Setup, Language, Time, Parental Control, Recording and Other.
Note: Pressing the EXIT button will save any changes you have made automatically and return you to
the previous menu. Press the MENU button to exit all the menus.
7.1 TV Setup
You can con gure the audio and video output settings.
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select TV Setup using the
/ button and press
the OK button.
1. TV SCART
You can select the TV SCART output option.
1. Select TV SCART and press the OK button.
2. Select RGB, CVBS, or S-Video and press the OK
button.
7. Settings
GB38
User’s Manual
2. VCR SCART
You can select the VCR SCART output option.
1. Select VCR SCART.
2. Select CVBS or S-Video using the OK or
/ button.
3. Audio
You can select the audio output option.
1. Select Audio.
2. Select Stereo or Mono using the OK or
/ button.
4. Dolby Digital
You can set Dolby Digital soundtrack option. If you select On, the Dolby Digital audio will be selected
automatically (when broadcast) and outputted via S/PDIF.
1. Select Dolby Digital.
2. Select On or O using the OK or
/ button.
5. Lip-Sync
You can adjust the sound di erence of audio and video.
1. Select Lip-Sync and press the OK or
button.
2. Adjust the sync using the
/ button.
3. Press the BACK button to complete.
Note: Lip-Sync will be applied to all channels when this option is adjusted.
6. Screen Ratio
You can select the screen ratio option.
1. Select Screen Ratio and press the OK button.
2. Select 16:9 – Widescreen TV or 4:3 – Traditional TV using the OK or
/ button.
7. Settings
GB39
User’s Manual
7. Display Format
You can select the display format according to the screen ratio.
1. Select Display Format and press the OK button.
2. When choosing 16:9 – Widescreen TV as screen ratio, select among Auto, 4:3 Pillar Box, 14:9 Pillar
Box, 16:9 Centre Cut Out, Anamorpic and press the OK button.
3. When choosing 4:3 – Traditional TV as screen ratio, select among 16:9 Letterbox, 14:9 Letterbox,
Centre Cut Out, Auto and press the OK button.
8. HDCP Default
You can enable or disable HD copy protection for programmes with no copy protection sent by the
broadcaster.
1. Select HDCP Default and press the OK button.
2. Select Enable or Disable using the OK or
/ button.
7. Settings
GB40
User’s Manual
7.2 Language
Language enables you to set the basic language and subtitle options.
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select Language using the
/ button and press
the OK button.
1. Preferred Language
Preferred Language allows you to choose from the languages available.
1. Select Preferred Language and press the OK button.
2. Select the language you want and press the OK button.
2. Subtitle Display
Subtitle Display allows you to enable the subtitles to appear automatically if they are provided by the
broadcaster.
1. Select Subtitle Display.
2. Select Enable or Disable using the OK or
/ button.
3. Subtitle Font
Subtitle Font enables you to select the font of the subtitle.
1. Select Subtitle Font.
2. Select Variable or Fixed using the OK or
/ button.
Variable Uses the horizontally variable subtitle font of the on-screen display.
Fixed Uses the  xed subtitle font as in TEXT.
7. Settings
GB41
User’s Manual
4. Audio Description
Audio description allows the user to select the narration of onscreen visuals, which is used for visually
impaired viewers. Setting the Audio Description option to Enable will automatically select the Audio
Description option when you change to a channel.
1. Select Audio Description.
2. Select Enable or Disable using the OK or
/ button.
Note: Not all channels/programmes will provide Audio Description; for further information please
contact the broadcaster.
7.3 Time
Time allows you to set the time you want the product
to turn ON (Wakeup) or OFF (Sleep) each day.
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select Time using the
/ button and press the
OK button.
1. Power ON
You can set the time the product turns on automatically.
1. Select Power ON and press the button.
2. Enter the powering on time using the NUMERIC(0-9) buttons or select Disable using the
/ button.
2. Power On Channel
You can select a channel you want the product to turn ON to each day.
1. Select Power On Channel and press the OK button to display the channel list.
2. Select the channel and press the OK button.
3. Power OFF
You can select the time the product turns o automatically.
1. Select Power OFF and press the
button.
2. Enter the powering o time using the NUMERIC(0-9) buttons or select Disable using the
/ button.
7. Settings
GB42
User’s Manual
7.4 Parental Control
Parental Control allows you to set password control for live or recorded content, change the password,
and lock the setup menu.
Tip: The default password is 0000.
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select Parental Control using the
/ button and
press the OK button.
4. You will be prompted to enter your password.
Enter the password using the NUMERIC(0-9)
buttons.
1. Guidance Policy
Enabling the Guidance Policy option will mean any programmes (or recordings) that have guidance
information will require the password to be entered to view them. The guidance information is sent by the
broadcasters for some programmes.
1. Select Guidance Policy and press the OK button.
2. Select Enable or Disable using the OK or
/ button.
Note: Guidance information is only available in freesat mode.
2. Age Limit
Age Limit enables you to place certain restrictions on the viewers by setting age limits. A password must
be entered to view the content.
1. Select Age Limit and press the OK button.
2. Select the age limit you wish to set.
Note: Age Limit is only available in non-freesat mode and will require the age classi cation information
to be sent by the broadcasters.
7. Settings
GB43
User’s Manual
3. Change Password
Change Password allows you to change the current password.
1. Select Change Password and press the OK button.
2. Enter the password in New Password using the NUMERIC(0-9) buttons.
3. Enter the password again in Verify Password to con rm.
4. Installation Lock
Installation Lock allows you to block access to the setup menu; the password will be required to enter the
menu when this option is enabled.
1. Select Installation Lock.
2. Select Enable or Disable using the OK or
/ button.
7. Settings
GB44
User’s Manual
7.5 Recording
Recording allows you to set the recordings auto-padding, and the settings for the instant replay and skip
forward buttons.
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select Recording using the
/ button and press
the OK button.
Note:
On Time - the broadcasters signal will be used for
accurate recording when broadcast.
1,2,3,5 Mins - The minutes you select to the start
and/or end times will be included where possible
to the recordings.
1. Recording Start Time
You can set the amount of time you want the recordings to start before the schedule billed time in the
EPG.
1. Select Recording Start Time and press the OK button.
2. Select the padding time using the OK or
/ button
2. Recording End Time
You can set the amount of time you want to add to the end of a recordings billed time in the EPG.
1. Select Recording End Time and press the OK button.
2. Select the padding time using the OK or
/ button
3. Instant Replay
You can set the length of time the video is replayed when pressing the REPLAY button.
1. Select Instant Replay and press the OK button.
2. Select the time using the OK or
/ button
4. Skip Forward
You can set the length of time the video is skipped when pressing the SKIP button.
1. Select Skip Forward and press the OK button.
2. Select the time using the OK or
/ button
7. Settings
GB45
User’s Manual
7.6 Other
You can con gure other settings such as info display time, OSD transparency, power saving in standby and
automatic standby.
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select Other using the
/ button and press the
OK button.
1. Info Display Time
You can set the time the information box is displayed on screen when changing channels.
1. Select Info Display Time and press the OK button.
2. Select a value between Disable, 1~20 seconds and press the OK button.
Note: When set to Disable, the i-plate will not be displayed when you switch the channel.
2. OSD Transparency
You can set the transparency of the On-Screen Display.
1. Select OSD Transparency and press the OK button.
2. Select among Disable, 25%, 50% and 75% and press the OK button.
Disable Fully opaque screen
25%, 50%, 75% The higher the % the more transparent the On-Screen Display.
7. Settings
GB46
User’s Manual
3. Power Saving in Standby
You can select whether the product switches to power saving mode in standby.
1. Select Power Saving in Standby.
2. Select On or O using the OK or
/ button.
Note:
When set the following will be disabled:
Front display panel will not show the time
• LNB loop-through
• SCART loop-through
When Power Saving in Standby is enabled any schedule recordings you have set will record as the
product will switch on to record the programme and go back to standby when completed.
4. Automatic Standby
When Automatic Standby is set to Enable the product automatically switches to standby mode after a
period of inactivity to help reduce the amount of electricity used.
1. Select Automatic Standby.
2. Select Enable or Disable using the OK or
/ button.
5. Guide Channel Genre
You can choose to display the Genre List when accessing the Guide.
1. Select Guide Channel Genre and press the OK button.
2. Select Enable or Disable using the OK or
/ button.
7.7 STB Mode
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select STB Mode using the
/ button and press
the OK or
button to select freesat or
Non-freesat.
Note: STB Mode will only appear when non-freesat
channels have been tuned and saved using the
Manual Tune option in the setup menu.
GB47
User’s Manual
8. Edit Channels
This chapter provides information on the channel editing options available for the main channel lists and
the favourites lists you create.
Note:
• Press the EXIT button to save the changes and return to the previous menu. Press the MENU button to
exit the menu screen.
• Press the TV/RADIO button to change between the TV and radio channel lists.
8.1 Edit Channel List
Edit Channels List enables you to delete, select and lock/unlock the channels in the edit channel list
conveniently.
1. Press the MENU button.
2. Select Edit Channels using the
/ button and
press the OK button.
3. Select Edit Channel List using the
/ button and
press the OK button.
Note: It is not possible to move or rename channels
in freesat mode. When in non-freesat mode
you can rename and move the channels.
1. Deleting Channels
1. Select the channels you want to delete and press
the OK button. You can select more than one
channel.
2. Press the RED button to delete the chosen
channels.
8. Edit Channels
GB48
User’s Manual
2. Locking/Unlocking Channels
Tip: The default password is 0000.
1. Select the channel you want to lock and press the OK button.
2. Press the GREEN button.
3. Select Lock and press the OK button.
Note:
When channels are locked, the Lock option will change to Unlock. Following the same procedure on
these channels will unlock them.
To watch locked channels, you must enter the password using the NUMERIC(0-9) buttons.
3. Selecting a Channel Group
1. Press the YELLOW button to display the list of groups.
2. Select the group you want and press the OK button.
4. Select All/Release All
1. Press the BLUE button.
2. Select Select All and press the OK button.
3. To release one or more channels from select all, press the OK button while the cursor is on the selected
channel.
8. Edit Channels
GB49
User’s Manual
8.2 Edit Favourite List
You can add or remove channels from the favourite groups, move favourite channels and rename
favourite groups.
1. Press the MENU button.
2. Select Edit Channels using the
/ button and press the OK button.
3. Select Edit Favourit List using the
/ button and press the OK button.
Note: Edit Favourite List is only available for freesat channels.
1. Adding/Removing Channels
1. Select the channels you want to add to the
favourite channel list and press the OK button.
2. Press the RED button to add the channels to the
favourite list you have chosen.
3. To remove channels from the favourite list, select
the channels from the list and press the RED
button.
Note: When the cursor is on the left column, the red
button is used to Add channels. When the
cursor is on the right column, the red button is
used to Remove channels.
2. Selecting Favourite Groups
1. Press the GREEN button to display the list of groups.
2. Select the favourite group you want and press the OK button.
3. Select All/Release All
1. Press the YELLOW button to select all channels in the favourite list.
2. To release all channels, press the YELLOW button again.
4. Renaming Favourite Groups
1. Select the favourite group you want to rename and press the OK button.
2. Press the BLUE button.
3. Select Rename Group and press the OK button.
4. A keyboard will appear. Enter the name of the favourite group using the keyboard.
5. Press the YELLOW button to complete.
Note: The YELLOW and BLUE buttons become activated only when the cursor is placed on the right
column.
8. Edit Channels
GB50
User’s Manual
5. Moving Favourite Channels
1. Select the favourite channel you want to move in the favourite list and press the OK button.
2. Press the BLUE button.
3. Select Move and press the OK button.
4. Move the cursor to the position required using the
/ button, and press the OK button.
5. The selected channel is moved to the new location.
8.3 Edit Customisable Channels
You can customise the regional channels broadcast by freesat, allowing you to select di erent regions
from those detected by your postcode.
1. Press the MENU button.
2. Select Edit Channels using the
/ buttons and
press the OK button.
3. Select Edit Customisable Channels using the
/
buttons and press the OK button.
Note: This feature may not be available for all
regional channels.
1. Customising Channels
1. Select a channel from the left column.
2. Move the cursor to the right column and select an alternative channel of the region you want and
press the OK button.
3. The selected channel will be customised as the default channel of the chosen channel number.
GB51
User’s Manual
9. Setup
In this chapter you can con gure Installation settings and search for channels.
Freesat Tune, Manual Tune, Software Update and Factory Reset are included in this section.
Note: Press the EXIT button to save the changes and return to the previous menu. Press the MENU
button to exit the menu screen.
9.1 Freesat Tune
1. Press the MENU button.
2. Select Setup using the
/ button and press the
OK button.
3. Select Freesat Tune using the
/ button and
press the OK button.
4. Enter your postcode. Use the
arrow to delete the
current postcode.
5. Please note that once you perform Freesat Tune,
all freesat channels will be deleted. Select Ye s and
press the OK button to delete all freesat channels.
6. Select Search and press the OK button to search
channels.
7. The channel search will start.
8. To stop the search, press the OK button during
channel search.
9. The results will appear. Select Save and press the OK button.
Note: Any schedules setup for recording will be removed if the Freesat Tune is carried out. If no channels
are available a popup message will be displayed.
9. Setup
GB52
User’s Manual
9.2 Manual Tune
1. Press the MENU button.
2. Select Setup using the
/ button and press the
OK button.
3. Select Manual Tune using the
/ button and
press the OK button.
4. Select Search and press the OK button. The
channel search will start.
5. To stop the search, press the OK button during
channel search.
6. The results will appear. Select Save and press the
OK button.
Transponder Select All to search for all transponders in the list.
Press OK to display the list of transponder, select the transponder you require
and press the OK button to search for it only.
If the transponder you require is not listed, select User De ned and enter the
transponder details you require.
Network Search Select Disable or Enable using the OK or
/ button.
Scrambled Type Select All or FTA and press the OK button.
Channel Type Select among All, TV and Radio and press the OK button.
Note: Searching for channels using Manual Tune will active the STB mode option in the Settings menu.
The channels detected and displayed in non-freesat mode will only display the Now and Next
programmes in the TV Guide. If there are no channels available, a message indicating the result
will pop up.
9. Setup
GB53
User’s Manual
9.3 Software Update
Software Update allows you to update the system software to maintain proper performance of the
product.
1. Press the MENU button.
2. Select Setup using the
/ button and press the OK button.
3. Select Software Update using the
/ button and press the OK button.
Note: For more information about the software update, refer to 11. Software Update.
1. Automatic Update
1. Select Automatic Update and press the OK
button.
2. When new software is detected, you can choose
to download the software immediately or save for
later.
3. When there is no new software to update, a popup
will appear.
2. Manual Update
1. Select Manual Update and press the OK button.
2. Enter the values for Satellite, Frequency, Polarization, Symbol Rate and FEC.
3. Select Search and press the OK button.
4. When new software is detected, you can choose to download the software immediately or save for
later.
Note:
When there is no new software to update, a popup will appear.
Software updates for products will be detected using the Automatic Update option. For details to use
di erent transponder details in the future (where applicable) please visit www.humaxdigital.com/
freesat.
9. Setup
GB54
User’s Manual
9.4 Factory Reset
Factory Reset enables you to restore the product to the factory default.
Warning: Please note that once you perform Factory Reset, all data such as the antenna setting
information, channel list and all user con gured data will be deleted.
1. Press the MENU button.
2. Select Setup using the
/ button and press the
OK button.
3. Select Factory Reset using the
/button and
press the OK button.
4. Select Ye s and press the OK button to restore all
setting to factory default. To return to the previous
menu, select No and press the OK.
5. Enter your password to proceed with the Factory
Reset.
6. When the factory reset is completed the product
will restart and the First Time Installation will
appear on screen.
Tip: The default password is 0000.
Note: For detailed information about the  rst installation, refer to Chapter 3. First Installation.
GB55
User’s Manual
10. System
10.1 Diagnostics
You can view system status information.
1. Press the MENU button.
2. Select System and press the OK button.
3. Select Diagnostics and press the OK button.
4. The system status information will be displayed.
10.2 Network
You can view the network information.
1. Press the MENU button.
2. Select System and press the OK button.
3. Select Network and press the OK button.
4. The network information will be displayed.
5. Select Con gure Ethernet and press the OK button. Select Con gure IP and press the OK or
/
button to select DHCP or Manual. When selecting Manual, you can enter the value for the network
information. Select Apply and press the OK button to save the changes.
Note: For information on the Network options on the product please visit www.humaxdigital.com/
freesat in the future.
10. System
GB56
User’s Manual
10.3 HDD Control
You can format the hard disk drive.
1. Press the MENU button.
2. Select System using the
/ button and press the OK button.
3. Select HDD Control using the
/ button and press the OK button.
1. Format HDD
To format the hard disk drive, select Format HDD and press the OK button. Select the partition you want
to format, select OK and press the OK button. Select Ye s and press the OK button. Enter the password to
complete.
10.4 Common Interface
You can view the CI-Module information.
1. Press the MENU button.
2. Select Common Interface and press the OK button.
3. The common interface information will be displayed.
GB57
User’s Manual
11. Media List
The product supports 4 types of Media lists. Press the MEDIA button and then the coloured buttons on
the remote control to access each list.
Video (RED) TV programmes that have been recorded
Radio (GREEN) Radio programmes that have been recorded
Music (YELLOW) MP3 (Music)  les you have transferred
Photo (BLUE) Jpeg (Photos)  les you have transferred
11.1 Video
When the Media List is on screen press the RED button
to select Video if not already selected. A list of the TV
programmes you have recorded will appear.
Note:
• Press the LIST button to sort the  les in  le name,
time, channel number order.
• Pres the i button to display the programme
information of the selected recording.
The icon ( ) will be displayed when the  le is
being played.
When a support USB device is connected via the
front or rear USB ports press the RED button to
change between the HDD and the USB device.
1. Video Setting
Press the OPT+ button in video list. A popup will
appear to display the setting option.
Sort:
Select the sorting order.
• List Type: Select between Simple or Normal list
types.
• File Manager: Go to le manager.
11. Media List
GB58
User’s Manual
2. Play Option
Select a recorded  le you want to playback and press
the OK button. A popup will appear to display the play
option.
Play from the last played position: Play the
recorded  le from the point it has been stopped.
Play from the start: Play the recorded  le from
the beginning.
Delete a  le: Delete the  le. Select Ye s and press
the OK button.
Rename: Rename the  le. Enter the name directly
using the keyboard displayed on the screen. Press
the YELLOW button to complete.
Select a still image and press the
/ button to
select the chapter you wish to view.
Note:
You can also press the PLAY button to play the  le from the last played position.
A chapter is made automatically by dividing a  le into eight smaller  les and capturing a still image of
each smaller  le. Chapters are used in play option by pressing the PREVIOUS and NEXT buttons.
3. Making Playlist
You can playback the chosen  les in the order you want.
1. Press the OPT+ button. A popup will appear to
display the setting option.
2. Select File Manager and press the OK button to
display File Manager.
3. Press the BLUE button and select Make Playlist
and press the OK button. A playlist will appear.
4. Select a  le in the playlist and press the OK button
to play the selected  le.
5. Select a  le in the playlist and press the RED
button to delete the  le from the playlist and
renumber the list.
6. Select a  le in the playlist and press the GREEN
button to move the  le. Move the  le within the
list using the
/ button. Press the OK button to complete.
Note: If all  les of the playlist are deleted, the playlist disappears.
11. Media List
GB59
User’s Manual
4. Editing Playlist
After making a playlist, you can view the playlist in
video list.
Select the playlist and press the OK button.
Play: Play the playlist.
Delete: Delete the playlist.
Edit: Edit the playlist.
5. File Manager
You can delete  les or copy  les to/from external devices.
1. Press the OPT+ button. A popup will appear to
display the setting option.
2. Select File Manager and press the OK button to
display File Manager.
Delete: Select the  le to delete and press the RED
button.
Copy: Select the  le to copy and press the GREEN
button.
Edit Mode: You can edit multiple  les. Press the
YELLOW button to go to edit mode. Press the
YELLOW button again to go back to normal mode.
Function: Press the BLUE button.
Select All Press the OK button to select all
or release all.
Make Folder Enter the name of the folder
directly using the keyboard
displayed on the screen.
Press the YELLOW button to
complete.
Rename Enter the name directly using
the keyboard displayed on
the screen. Press the YELLOW
button to complete.
Lock/Unlock Press the OK button to lock or
unlock  le.
Note: You can rename only one  le at a time.
11. Media List
GB60
User’s Manual
6. Connecting External Devices
1. Connect the device to the recorder. The detected
device will appear.
2. Press the OPT+ button and select File Manager.
3. Press the OPT+ button while the cursor is in the
right column to switch the device. Select the
device and press the OK button.
11.2 Radio
When the Media List is on screen press the GREEN
button to select Radio if not already selected. A list of
the radio programmes you have recorded will appear.
Note: The features available in the radio list are the
same as the video list in section 11.1 Video.
11. Media List
GB61
User’s Manual
11.3 Music
When the Media List is on screen press the YELLOW
button to select Music if not already selected. A list of
the MP3 (Music)  les you have transferred will appear.
Note:
• Press the LIST button to sort the  les in  le name
or time order.
• Press the i button while playing a music  le to
view the  le information.
1. Music Setting
Press the OPT+ button in music list. A popup will
appear to display the setting option.
Sort: Select the sorting order.
Repeat: Select the repeat option.
Shu e: Enable or disable shu e mode.
File Manager: Go to  le manager.
2. Music Player
1. Select the music  le you want to play and press
the OK or PLAY button to play.
2. Press the STOP button to stop playing.
3. Press the PAUSE button to pause.
4. Press the
/ button to go back or go forward.
5. Press the OPT+ button to display Music Setting.
6. Press the EXIT button to stop and go to live radio.
11. Media List
GB62
User’s Manual
3. File Manager
You can delete  les or copy  les to/from external devices.
1. Press the OPT+ button. A popup will appear to display the setting option.
2. Select File Manager and press the OK button to display File Manager.
Delete: Select the  le to delete and press the RED button.
Copy: Select the  le to copy and press the GREEN button.
Edit Mode: You can edit multiple  les. Press the YELLOW button to go to edit mode. Press the
YELLOW button again to go back to normal mode.
Function: Press the BLUE button.
Select All Press the OK button to select all or release all.
Make Folder Enter the name of the folder directly using the keyboard displayed on the screen.
Press the YELLOW button to complete.
Rename Enter the name directly using the keyboard displayed on the screen. Press the
YELLOW button to complete.
Note: You can rename only one  le at a time.
4. Connecting External Devices
1. Connect the device to the recorder. The detected device will appear.
2. Press the OPT+ button and select File Manager.
3. Press the OPT+ button while the cursor is in the right column to switch the device. Select the device
and press the OK button.
11. Media List
GB63
User’s Manual
11.4 Photo
When the Media List is on screen press the BLUE
button to select Photo if not already selected. A list
of the Jpeg (Photos)  les you have transferred will
appear.
Note:
• Press the LIST button to sort the  les in  le name
or time order.
• Press the i button in the photo list to view the  le
information.
1. Photo Setting
Press the OPT+ button in photo list. A popup will
appear to display the setting option.
Sort: Select the sorting order.
Display Time: Select the display time.
Aspect Ratio: Select Auto or Original.
Music: Select the music option.
File Manager: Go to  le manager.
2. Photo Viewer
1. Press the OK or PLAY button to view the photos in slideshow.
2. Press the OK button to display the photo playbar.
3. Press the
/ button to view the previous/next photo.
4. Press the PAUSE button to stop the slideshow. Press the PAUSE button again or press the PLAY button
to continue the slideshow.
5. Press the PREVIOUS/NEXT button to move back/forward  ve photos
6. Press the OPT+ button to display Photo Setting.
7. When music player is playing, press the FAST BACKWARD/FAST FORWARD button to move to the
previous/next music  le.
8. Press the EXIT button to stop the music player.
11. Media List
GB64
User’s Manual
3. File Manager
You can delete  les or copy  les to/from external devices.
1. Press the OPT+ button. A popup will appear to display the setting option.
2. Select File Manager and press the OK button to display File Manager.
Delete: Select the  le to delete and press the RED button.
Copy: Select the  le to copy and press the GREEN button.
Edit Mode: You can edit multiple  les. Press the YELLOW button to go to edit mode. Press the
YELLOW button again to go back to normal mode.
Function: Press the BLUE button.
Select All Press the OK button to select all or release all.
Make Folder Enter the name of the folder directly using the keyboard displayed on the screen.
Press the YELLOW button to complete.
Rename Enter the name directly using the keyboard displayed on the screen. Press the
YELLOW button to complete.
Note: You can rename only one  le at a time.
4. Connecting External Devices
1. Connect the device to the recorder. The detected device will appear.
2. Press the OPT+ button and select File Manager.
3. Press the OPT+ button while the cursor is in the right column to switch the device. Select the device
and press the OK button.
GB65
User’s Manual
12. Personal Video Recorder (PVR)
The product automatically bu ers the channel you are viewing to the Hard Drive (2 hour period), this
enables you to pause live TV, rewind to the point you changed to the channel, and fast forward.
Note: The bu er will be cleared whenever you change channels.
12.1 Play bar
Press the PLAY button while watching a recording to display the play bar. Play bar displays the current
operation status, the time gap between the broadcasting point and watching point and the amount of
temporarily saved programme.
1. Play status
2. Start time
3. Amount of saved programme
4. Present time
5. Play pointer
6. Total time (present time in TSR)
To move to the speci ed time point directly, enter the time you want using the NUMERIC(0-9) buttons.
To move the watching point bar to the time point you want, press the
/ button while playing back and
then press the OK button to play the programme from the speci ed time point. If you do not press the
OK button after moving the watching point, it will move automatically. Press the STOP button to stop the
current  le and go to live TV.
1 2 3 64 5
12. Personal Video Recorder (PVR)
GB66
User’s Manual
12.2 Time Shifted Recording (TSR) and Playback.
You can perform Time Shifted Recording (TSR) and other VCR functions within TSR using the playback
control buttons while playing a programme.
1. Playback
You can view the recorded  les in the Media ListVideo. Press the MEDIA button to access the recorded
le list easily.
1. Press the REPLAY button to jump back and play from that point. Press the STOP button to return to
live video.
2. Press the SKIP button to jump ahead and play from that point. Press the STOP button to return to live
point.
Note:
• Enter the NUMERIC(0-9) buttons during playback and press the OK button to move to that speci c
time point.
For more information about playback, refer to 11.1.1 Play Option.
2. TSR
You can perform fast backward, fast forward, slow motion and pause while playing back a recorded  le
from the media list.
Fast Forward
1. Press the FAST FORWARD button to fast forward the programme.
2. Each time you press the FAST FORWARD button, the speed increases (x2, x4, x16, x32, x64).
3. If you press the PLAY button, the fast forward operation stops and the programme is played at normal
speed.
Note: The Fast Forward operation is only available during playback of a recording or when you are
behind live TV (if you have paused live TV, used slow motion, or fast backward). You are only able
to fast forward to the live TV point; when this is reached the programme will play at normal speed
automatically.
12. Personal Video Recorder (PVR)
GB67
User’s Manual
Fast Backward
1. Press the FAST BACKWARD button to go back during a recording or the bu er.
2. Each time you press the FAST BACKWARD button, the speed increases (x2, x4, x16, x32, x64).
3. If you press the PLAY button, the fast backward operation stops and the programme is played at
normal speed.
Note: You can fast backward back to the start of a recording or to the start of the bu er. When you reach
the start point the programme will play at normal speed automatically.
Slow Motion
1. Press the SLOW button to playback in slow motion.
2. Each time you press the SLOW button, the playback speed becomes slower.
3. Press the PLAY button to play the programme at normal speed.
Pause
1. Press the PAUSE button to pause the current programme.
2. If you press the PAUSE button once again, the programme is resumed from that point.
Note: Pressing PAUSE while watching live TV will increase the delay from the point you have paused
to the live broadcast. You will be able to use the FAST FORWARD or SKIP FORWARD functions
during this time. To go directly to the live broadcast press the STOP button.
12.3 Recording
Using the built-in hard disk drive, you can record a programme without external media devices such as a
VCR.
Note:
Ensure that su cient disk space is available before recording, the recording will either fail or not
record fully if there is insu cient disk space.
A one hour recording may require 2-3 GB of space depending on the broadcast.
Radio programmes can be recorded.
• Pressing the STANDBY button while recording will not stop the recording. The product will go to
standby mode after completing recording.
• Press the i button to display the the channel currently recording and i-plate.
12. Personal Video Recorder (PVR)
GB68
User’s Manual
1. General Recording
1. Press the RECORD button to record the programme you are currently viewing. The recording will stop
at the programmes end time in the Guide.
2. Press the RECORD button again while recording to adjust the recording end time. You can adjust the
recording end time using the
/ button.
Warning: When using INSTANT RECORD please check the end time of the recording and amend where
necessary to ensure you record for the amount of time required.
2. Multi-Channel Recording
1. To record another channel, change channels while
recording and press the RECORD button again.
2. You can record two channels simultaneously.
3. If you change to a third channel and press the
RECORD button you will be prompted to select
one of the other two recordings to cancel.
Note: Recording 2 channels may be limited
depending on your connections from the
satellite dish; 2 feeds from the dish are
required to record 2 channels without
limitations.
3. Stop Recording
1. Press the STOP button to stop recording one of the two channels.
2. You will be prompted to select one among the current recordings. Select the channel you want to stop
recording using the
/ button.
3. Select OK and press the OK button.
12. Personal Video Recorder (PVR)
GB69
User’s Manual
12.4 Bookmark
1. Adding Bookmark
You can jump to a position directly using the bookmark feature in recorded  le playback. Use bookmarks
to search a speci c scene quickly and conveniently.
Press the ADD BOOKMARK button at the location you want to set a bookmark while playing back a
recorded  le. The bookmark icon is displayed at the lower right of the screen.
Note: The bookmark function is available for recorded  les only.
2. Bookmark List
1. Press the BOOKMARK LIST button after adding a bookmark.
2. Select the location you wish to view using the
/ button. The bookmark image is displayed at the
lower right of the screen.
3. Press the BOOKMARK LIST button again to return to the play bar.
4. To delete a location, select the location you want to delete and press the ADD BOOKMARK button.
1. Bookmark cursor
2. Watching point time
3. Watching point
4. Bookmark icon
41 2 3
GB70
User’s Manual
In order to maintain proper performance of the product, it is essential to have the most up-to-date
software. Visit the Humax website to check the latest news and newly released software versions
(http://www.humaxdigital.com/freesat). It is recommended that you periodically check for the
availability of software update.
13.1 OTA (Over the Air)
OTA - Over the Air Software Updates will be broadcast via satellite for the product when new updates are
available. Humax reserves the right for deciding when the software updates will be released.
Follow below to ensure that you receive the OTA Software Updates when they are released:
1. You are connected to a suitable satellite dish and are receiving the all of the freesat service.
2. The signal strength and quality are at a high level; if you are experiencing problems with the signal
then please do not continue with the download.
3. The product is in Standby mode each night allowing it to detect, download, and install the updates
when broadcast.
Caution:
Please do not unplug the product from the mains during the software update procedure; this can
cause the product not to operate.
Please do not remove the antenna cable from the dish from the product during the update as this can
cause the product not to operate.
Note:
For information on the release of new software or the changes made please visit www.humaxdigital.
com/freesat.
The download can take between 5 - 10 minutes to complete.
During the update process you will not be able to use the product.
During the software update scheduled recordings will not take place.
You cannot schedule programmes during software update.
1. Software update while watching a programme
When new software is detected, you can choose to download the software immediately or save for later. In
case there is no software currently available, select Next and press the OK button to proceed to the next
step.
13. Software Update
GB71
User’s Manual
14.1 Menu Map
1. TV Setup
2. Language
3. Time
4. Parental Control
5. Recording
6. Other
7. STB Mode
Settings
1. Edit Channel List
2. Edit Favourite List
3. Edit Customisabel Channels
Edit Channels
1. Freesat Tune
2. Manual Tune
3. Software Update
4. Factory Reset
Setup
1. Diagnostics
2. Network
3. HDD Control
4. Common Interface
System
14. Appendix
14. Appendix
GB72
User’s Manual
14.2 Trouble Shooting
For more troubleshooting and advice please visit www.humaxdigital.com/freesat or contact the Humax
Customer Helpline.
1. Freesat Detection Fails / Invalid Postcode
Unplug the Foxsat-HDR from the mains and unplug the cable from your dish which is connected to the LNB IN
connection.
Check that the “F-type” connector is  rmly on the end of the cable.
Power on the and follow the Installation Wizard again.
2. If still not Detecting the signal or verifying postcode
Select NEXT through the Installation Wizard and then FINISH at the end.
• Press the OK button to enter the SETUP menu and Select Manual Tune.
Select the following Transponder (11428 H 27500 A) from the list of Transponders.
Check that you are receiving stable levels for both Signal Strength & Signal Quality or >50%.
If you are not receiving su cient Signal on this Transponder then you may require an installer to check your
Dish Alignment, LNB, cabling, or connectors.
3. No message displayed on the front panel (the product will not switch on)
Check the main power cable and make sure it is plugged into a suitable power outlet.
Check that the mains supply is switched on.
Connect the power cable to a di erent power outlet.
4. No picture on TV set
Make sure that the product is powered on and in operation mode. (Press the STANDBY button)
Make sure that the AV cable is  rmly connected to the TV.
Make sure that the antenna cable is properly connected to the product.
Make sure that the antenna setting in the menu is correct.
Check the brightness level of the TV.
Check if the channel is currently on air. Contact the broadcaster to ensure that the channel is running.
• Press the
SOURCE button if the product is in external input mode.
5. Poor picture/sound quality
Install the antenna in an obstacle-free place.
Make sure there is no mobile phone or microwave oven near the product.
Keep the power and the antenna cable for the satellite apart from each other.
Check the signal levels and adjust your antenna if the level is too low. The signal level may be a ected by
weather conditions.
Note: If the antenna is covered with snow or the RF is weakened by heavy rain, the condition of the
sound and picture may temporarily be poor. However, the poor sound and picture quality due to
weather conditions cannot be accepted as a malfunction of product.
Check that your dish alignment is correct.
Change the satellite dish for a larger one as this will increase the signal levels received.
Replace the LNB with a lower noise factor in cases where the noise factor is too high.
Replace the LNB with a new one in case it is damaged or out of order.
14. Appendix
GB73
User’s Manual
6. No or poor sound
Check that your AV cable is connected correctly.
Check the volume levels of your TV set and the product.
Check if the product or TV is on mute.
Check audio type or soundtrack option in the AV menu.
7. Remote control does not operate.
To control the product, the top end of the remote control should point directly towards the receiving part of the
product.
Remove and reinsert the batteries in the remote control.
Replace the batteries in the remote control for a new set.
8. Cannot make reservations.
Check that no previous reservations are con icting with the new reservation.
9. No password information is given.
The default password is always 0000.
10. Channel search does not work.
Make sure that the antenna setting in the menu is correct.
11. Cannot update new software.
If there is no message displayed requesting an update, there is no software available for your product at that
time.
12. Cannot record progammes.
The hard disk is full. Delete unnecessary programmes and make space for new recording.
Check if recording is overlapped with another channel. Stop the current recording or wait until the recording is
nished.
Check that the product is switched on when starting recording.
13. Cannot operate the TSR (Time Shifted Recording).
The TSR may not be available during the recording. Wait until the recording is  nished.
Delete unnecessary programmes and make space for new recording.
14. The product makes a humming noise.
The noise is from the fan; the hard disk is operating normally. This kind of noise is inevitable but seldomly
noticeable.
15. Cannot playback.
To play back the recorded  le of a scrambled channel, use the Smartcard. In case it has been a long time since
you last recorded, this may not work. Contact the product distributor.
The signal during the recording may be weak or the hard disk too full.
16. Cannot change channel while recording.
Certain channels may not be changed due to restriction of the tuner or connection type.
14. Appendix
GB74
User’s Manual
14.3 Error Message
Error message Possible causes What to do
No or bad
signal
The satellite dish is not pointing at the
satellite.
Adjust dish alignment.
Signal is too weak.
Increase the LNB voltage or connect a
signal ampli er.
Satellite dish is too small. Change to a larger dish.
Problem with LNB. Change the LNB.
Wrong antenna setting. Set the antenna correctly.
The channel is
scrambled or
not available.
The channel has a signal, but no audio or
video is provided.
Con rm whether the channel is
currently on air.
The channel has not been deleted by
broadcasting company.
Remove the channel from the channel
list and check for new transponder
details.
The channel is for data broadcasting.
The channel can only be viewed with
the appropriate model that supports
data channels.
Audio not
available.
The channel has a video signal, but no
audio is provided.
Press the audio button on your remote
control to con rm that the channel has
audio options.
Short LNB
LNB cable is short. Replace LNB Cable.
LNB is internally short. Replace LNB.
Alien substance is inserted in LNB IN
Port and port may be damaged.
Remove the alien substance and
contact local Service centre in case
damaged has occurred.
14. Appendix
GB75
User’s Manual
14.4 Speci cation
Tuner & Channel
Input Connector F-Type, IEC 169-24, Female
Frequency Range 950MHz to 2150MHz
Signal Level -25 to -65dBm
LNB Power & Polarisation
Vertical : +13.3V(+14.3V at high voltage)
Horizontal : +18.3V(+19.3V at high voltage)
LNB Rating : LNB 1 IN: Max. 13/18V 250mA
LNB 2 IN: Max. 13/18V 500mA
22KHz Tone
Frequency : 22 ± 4KHz
Amplitude : 0.7 ± 0.2V
DiSEqC Control Version1.0, 1.2, USALS, SCD (Single Cable Distribution)
Demodulation QPSK, 8PSK
Input Symbol Rate
DVB-S : 2-45MS/s
DBV-S2 : 10-30MS/s(QPSK/8PSK)
FEC Mode
DVB-S: Auto,1/2,2/3,3/4,5/6,7/8
DVB-S2: Auto,1/2,3/5,2/3,4/5,5/6,8/9,9/10 (QPSK)
Auto,3/5,2/3,3/4,5/6,8/9,9/10 (8PSK)
MPEG Transport Stream A/V Decoding
Transport Stream
MPEG-2 ISO/IEC 13818
Transport Stream Speci cation
Pro le Level MPEG-2 MP@ML, MPEG4 HD HP@L4, PAL
Input Rate 15MB/s Max
Video Format 4:3, 16:9
Video Resolution 1080i, 720p, 576p, 576i
Audio Decoding MPEG-1 Layer II, Dolby-AC3 Audio
Audio Mode Single channel/Dual channel/Joint stereo/Stereo
14. Appendix
GB76
User’s Manual
Memory
Flash Memory 16MB
RAM 256MB
EEPROM 8KB
Audio/Video
Video
TV-SCART(CVBS,S-Video,RGB)
VCR-SCART(CVBS, S-Video)
RCA-Type(CVBS), HDMI/HDCP
Audio TV-SCART, VCR-SCART, Audio L/R, S/PDIF(Digital Audio Output)
Data Port
USB USB 2.0 Host (5 V 500mA Max.)
Power Supply
Input Voltage 90-250V a.c., 50/60Hz
Type SMPS
Power Consumption Max. 50W
Protection
Separate internal fuse.
The input should be protected against lightning.
Physical Speci cation
Size 380mm × 55mm × 252mm
Weight (Net) 3.1kg
Operating Temperature 0 ºC to +45 ºC
Storage Temperature -10 ºC to +70 ºC
14. Appendix
GB77
User’s Manual
14.5 Glossary
1. DiSEqC (Digital Satellite Equipment Control)
A DiSEqC compatible receiver relies on a switching box which detects the 22kHz tone pulsing rapidly
on and o . In this way, a specially designed receiver can control numerous LNBs through a DiSEqC
switching box.
2. Dolby Digital
An encoding system that digitally compresses up to 5.1 discrete channels of audio (left front, centre,
right front, left surround, right surround) into a single Bitstream. A low frequency e ect (LFE) channel
is included providing the sound needed for special e ects.
3. DVB (Digital Video Broadcasting)
Set of standards that de ne digital broadcasts using satellite, cable or terrestrial systems.
4. EPG (Electronic Programme Guide)
An electronic equivalent to a printed television listings magazine; it is an application used with
digital set-top boxes and digital television sets to list current and scheduled programs that are or
will be available on each channel, including a short summary or commentary for each program. The
information supplied in the EPG is sent and updated by the channel broadcaster.
5. FEC (Forward Error Correction)
A technique for error control of data transmission.
6. Frequency
The property of a signal measured in cycles per second (=Hz).
7. FTA (Free- To-Air)
An unscrambled broadcaster allowing customers to view channels or services without paying any
subscription.
8. HDD (Hard Disk Drive)
The primary computer storage medium, which is made of one or more aluminum or glass platters,
coated with a ferromagnetic material.
9. Hi-Fi (High Fidelity)
The characteristics of audio devices that can play back all the audio frequencies a person can detect,
which is the range of 16Hz~20KHz. Sometimes it is used to indicate good quality of audio devices such
as stereo tape recorders.
10. LNB (Low Noise Block)
A device that is mounted on an arm facing your satellite dish, focusing on satellite signals. A LNB
converts signals received from satellite to a lower frequency and sends them to a satellite receiver via
coaxial cable.
11. OSD (On Screen Display)
OSD displays the basic information necessary for the users to con gure monitor or TV settings. OSD
information may include brightness, contrast, tuning, RGB adjustment, and screen size and position.
14. Appendix
GB78
User’s Manual
12. OTA (Over the Air)
A standard for the transmission of software for equipment, through a broadcast system. Manufacturers
reserve the right for deciding the release of the software for their products.
13. Polarisation
The direction of the electrical and magnetic  elds of a signal. Satellites use both vertical and horizontal
polarisation so a frequency can be used twice.
14. PVR (Personal Video Recorder)
Video recorder that can record and playback programmes directly using the embedded hard disk
drive(s).
15. PID (Packet Identi er)
A set of numbers identifying stream packets contained within a single data stream.
16. QPSK (Quaternary Phase Shift Keying)
Digital modulation technique in which the carrier phase can have one of four possible values.
17. RF (Radio Frequency)
Television signals are modulated onto RF signals and are then demodulated by your televisions or
STB’s tuner.
18. SCART
A 21-pin connector standard to connect two pieces of Audio-Visual equipment such as a TV and a VCR.
Each device will have a 21-pin female connection; a cable with male connection at both ends is used
for connecting the devices.
19. S/PDIF (Sony/Philips Digital Interface format)
A standard format for the transfer of digital audio signals. It allows the transfer of digital audio
between two devices without any conversion to and from analogue, which could degrade the signal
quality.
20. S-Video (Super-Video)
Sometimes referred to as Y/C video; a technology for transmitting video signals via a cable. It is a video
signal transmission in which the luminance (brightness) and the chrominance (colour) signals are
transmitted separately to achieve superior picture clarity.
21. Transponder
A satellite is divided up in parts called transponders. A transponder is one distribution section of the
satellite. Each transponder can be used for distribution of several channels or services.
22. Trick-Play
Pause, Fast Forward/Fast Backward, Slow Motion, Instant Replay, Commercial Skip, Repeat A-B.
23. TSR (Time Shifted Recording)
A function that records the present programme temporarily to support trick-play.
14. Appendix
GB79
User’s Manual
14.6 Service and Support
Information concerning troubleshooting, software upgrade and product support is provided in the
following websites and call centres. Should your product require warranty service, please contact your
local retailer to obtain the appropriate authorization.
UK
Tel:
Opening Hours:
0844 669 8800
Mon-Fri: 09:00-17:30
Excluding bank holidays
Calls charged at local rate from a BT landline. Other operators may vary.
E-mail:
Website:
Language:
freesat@humax-digital.co.uk
www.humax-digital.co.uk / www.freesat.co.uk
English
14. Appendix
GB80
User’s Manual
14.7 Remote Control Code List
1. Using the Universal Remote Control
1. Select the mode(PVR, TV, DVD, AUDIO) you want to set by pressing the corresponding button on the
remote control. The button will blink once.
2. Keep pressing the button for 3 seconds until the button lights on.
3. Enter the 3-digit code. Every time a number is entered, the button will blink. When the third digit is
entered, the button will blink twice.
4. If a valid 3-digit code is entered, the product will power o .
5. Press the OK button and the mode button will blink three times. The setup is complete.
6. If the product does not power o , repeat the instruction from 3 to 5.
Note:
When no code is entered for one minute the universal setting mode will switch to normal mode.
Try several setting codes and select the code that has the most functions.
Remote Control Function List
The keys on the remote control function as in the list below.
Note: Some keys may not function depending on the product.
Button TV DVD AUDIO
STANDBY POWER POWER POWER
MUTE MUTE MUTE
PVR
TV
DVD
AUDIO
1 DIGIT 1 1 INPUT 1
2 DIGIT 2 2 INPUT 2
3 DIGIT 3 3 INPUT 3
4 DIGIT 4 4 INPUT 4
5 DIGIT 5 5 INPUT 5
6 DIGIT 6 6 INPUT 6
7 DIGIT 7 7 INPUT 7
8 DIGIT 8 8 INPUT 8
9 DIGIT 9 9 INPUT 9
0 DIGIT 0, 11 0 INPUT 0
TV Portal
MENU MENU MENU MENU/MODE
14. Appendix
GB81
User’s Manual
Button TV DVD AUDIO
TEXT EXPAND PLAY PLAY
II
TEXT HOLD PAUSE PAUSE
PIP INPUT STOP STOP
PIP MOVE RECORD, OPEN CLOSE RECORD

PIP OFF
REWIND, SEARCH REVERSE;
SCAN
DVD SEARCH REW, CD
SEARCH REW, REW

PIP
FAST FORWARD, SEARCH
FORWARD; SCAN
FAST FORWARD, DVD
SEARCH REW, CD SEARCH
REW, REW
I

TEXT MIX SKIP -, TRACK -, CHAPTER - DVD SKIP -, CD SKIP -, SKIP -

I
TEXT OFF, TV SKIP, TRACK +, CHAPTER +
DVD SKIP+, CD SKIP +,
SKIP +
RED RED RED RED
GREEN GREEN GREEN GREEN
YELLOW YELLOW YELLOW YELLOW
BLUE BLUE PROGRAMME BLUE
MEDIA
GUIDE GUIDE GUIDE DSP MODE
OK OK OK OK
UP UP UP UP
LEFT LEFT LEFT LEFT
RIGHT RIGHT RIGHT RIGHT
DOWN DOWN DOWN DOWN
EXIT EXIT EXIT, RETIRN EXIT
BACK
LAST, RECALL;
PP; LAST CHANNEL
CLEAR REPEAT
VOL+ VOL+ VOL+ VOL+
VOL- VOL- VOL- VOL-
INFO, OSD; DISPLAY INFO, OSD; DISPLAY INFO
LIST LIST
P+ P+ P+ P+
P- P- P- P-
TEXT TEXT PVR MENU
AUDIO, LANGUAGE SURROUND
SUB SUBTITLE, LANGUAGE; CC SUBTITLE
14. Appendix
GB82
User’s Manual
Button TV DVD AUDIO
TV/RADIO
TV/DTV ATV/DTV; D/A;
DTV/TV; DTV; DIGITIAL
HDD, DVD/HDD BAND
OPT+ RANDOM
TEXT SUBPAGE
TEXT TIME
RANDOM
TEXT INDEX TITLE
TEXT POSITION
TEXT CANCEL;
TEXT UPDATE
SLOW;
STEP
SOURCE
SOURCE, AV, 55INPUT;
TV/AV
SOURCE, TV/DVD, TV/DISK SOURCE, FUNCTION
SLEEP SLEEP SLEEP SLEEP
V-FORMAT
TEXT SIZE; TEXT EXPAND;
FTB
WIDE
WIDE, FORMAT, 16:9,
ASPECT; ZOOM
ZOOM
2. TV Code List
Brand Code
A.R. Systems 102, 006, 080, 066
Accent 006
Acer 261, 278, 305
Acoustic Solutions 210, 312, 324, 370, 386, 428, 477
Acura 002
ADL 224
Admiral 043, 014, 015, 023
Advent 192, 342
Adyson 034, 035
AEG 211, 256, 327, 489
Agashi 043, 034, 035
AGB 094
Agef 014
Aiko 006, 061, 043, 074, 002, 004, 011,
028, 034, 035, 065
Aim 006, 171
Airis 316, 413, 473
Aiwa 139, 141, 445
Akai 102, 006, 098, 144, 145, 111, 061,
043, 074, 148, 232, 280, 128, 122,
461, 109, 462, 489, 094, 084, 083,
065, 035, 034, 033, 028, 023, 011,
004, 002, 154, 321
Akiba 006, 036, 080, 045
Akito 006, 044
Akura 006, 144, 134, 204, 043, 036, 002,
026, 045, 071, 298, 327, 376, 451
Alaron 034
Alba 006, 144, 134, 204, 087, 064, 036,
005, 108, 473, 455, 447, 388, 099,
084, 077, 072, 065, 059, 034, 023,
002
AlfaView 220
All-Tel 190, 238
Allorgan 032, 035
Allstar 006
Amitech 131, 241
Amoi 315
Amplivision 064, 035, 049
14. Appendix
GB83
User’s Manual
Amstrad 006, 204, 043, 036, 074, 002, 023,
026, 062, 065, 071, 094, 128, 410,
436, 451
Anam 006, 002
Anam National 006, 129
Andersson 210, 211
Anglo 043, 002
Anitech 006, 043, 002, 045
Ansonic 006, 134, 064, 002, 017, 023, 042,
048 , 066, 070, 285
AOC 120, 266, 335
Apollo 083
Apro 420
Arc En Ciel 020
Arcam 034, 035
Ardem 006, 144
Arena 006
Aristona 102, 006
ART 204
Arthur Martin 023
ASA 010, 014, 017, 018, 055
Asberg 006
Asora 002
Asuka 043, 036, 034, 035, 045
Atec 340, 387
Atlantic 006, 032, 034, 042, 049
Atori 002
Auchan 023
Audiosonic 006, 144, 086, 145, 043, 064, 036,
002, 020, 035, 066, 190, 250, 405,
473
Audioton 086, 043, 064, 035
Audiovox 079
Aumark 009
Autovox 014, 032, 035, 056, 097
AVC 472
Avious 352
Awa 111, 005, 019, 002, 003, 035, 079,
271
Axxent 002
Baier 192
Baird 011, 012, 020, 033, 035, 054, 218
Bang & Olufsen 014
Barco 023
Basic Line 102, 006, 134, 204, 036, 080, 002,
023, 035, 045, 053, 066, 211
Bastide 035
Bauer 171, 344
Baur 006, 030, 061, 028, 056, 093, 096,
097, 101
Bazin 035
Beaumark 027
Beko 006, 144, 086, 145, 111, 064, 072,
172, 361, 405
Belson 138, 201, 215
Belstar 204
BenQ 223, 328, 329
Bensten 258, 436, 437
Beon 006, 072
Berthen 134
Best 064
Bestar 006, 064, 066
Bestar-Daewoo 066
Binatone 035
Black Diamond 444, 204, 211
Blackway 036, 045
Blaupunkt 030, 005, 080, 025, 028, 096, 101
Blue Media 340, 387
Blue Sky 102, 006, 144, 134, 204, 145, 087,
036, 080, 091, 119, 045, 215, 229,
254, 265, 310, 361, 380, 445
Blue Star 045
BlueH 391
Boca 361
Boman 256
Boots 002, 035, 044
Bork 265
Bosch 049
BPL 006, 033, 045, 202
Brandt 120, 144, 103, 020, 046, 052
Brimax 380
Brinkmann 006, 134, 086, 072, 095
Brionvega 006, 014, 062
Britannia 034, 035
Brother 043
Bruns 014
14. Appendix
GB84
User’s Manual
BSR 023
BTC 036
Bush 102, 006, 144, 134, 204, 138, 087,
061, 043, 036, 005, 108, 376, 373,
370, 361, 355, 352, 327, 388, 430,
431, 432, 440, 448, 451, 473, 476,
477, 478, 002, 033, 035, 044, 045,
056, 059, 065, 066, 095, 133, 164,
210, 213, 229, 232, 250
Canton 036
Capsonic 043
Carad 134, 204, 113
Carena 006, 080
Carrefour 006, 005, 010
Carver 025
Cascade 006, 002
Casio 006
Cat 373, 504
Cathay 006, 386
CCE 006
cello 397, 410, 418, 419, 420
Centrum 204
Centurion 006
Century 014
CGE 064, 023, 072
Changhong 180
Chimei 475, 415
Cimline 036, 002
Cineral 079
Cinex 128, 213, 327
Citizen 009
City 002
Clarivox 006, 010, 072
Classic 091
Clatronic 006, 144, 043, 064, 036, 002, 035,
049, 065, 256
Clayton 204
CMS 034
CMS Hightec 035
Concorde 002
Condor 006, 043, 064, 002, 034, 045, 049,
070, 072
Conia 179, 201, 298, 376
Conrac 172
Contec 006, 005, 002, 034
Continental Edison 087, 020, 046
Cosmel 006, 002
Crosley 014, 023
Crown 006, 144, 134, 204, 086, 145, 087,
111, 143, 064, 361, 135, 072, 071,
053, 033, 002
Crown Mustang 135
CS Electronics 036, 034
CTX 395
Curtis Mathes 009, 015, 021, 024, 079
Cybertron 036
Cytronix 246
D-Vision 102, 006, 451
Daewoo 102, 006, 124, 444, 036, 441, 406,
341, 338, 271, 249, 195, 192, 190,
164, 133, 119, 091, 079, 066, 035,
034, 002
Dainichi 036, 034
Daitsu 237
Dansai 006, 005, 002, 004, 033, 034, 035
Dansette 071
Dantax 144, 204, 086, 145, 064, 361, 445,
450
Datsura 033
Dawa 006
Daytek 221, 269, 271
Dayton 002, 221, 269
Daytron 006, 002, 066
De Graaf 098, 007, 023, 033
DEC 258
Decca 006, 011, 035, 044, 094, 118
Dell 235, 278
Denko 043
Denon 021
Denver 006, 108, 214, 256, 352, 410, 453,
473, 489
Desmet 006, 002, 014, 049
DGM 436
Diamant 006
Diamond 181
DiBoss 293
14. Appendix
GB85
User’s Manual
Digatron 006
Digihome 210, 370
Digiline 006, 134, 018
Digimate 198
Digital Device 340
Digitek 310, 380
Digitrex 478
Digix Media 195
Dixi 006, 002, 014, 035
DL 199, 258
DMTech 260, 438, 449, 454, 456
Domeos 134
Dream Vision 379
DTS 002
Dual 006, 204, 208, 035, 042, 054, 056,
095, 097, 164, 210, 219, 237, 468
Dual Tec 035
Dumont 010, 011, 014, 017, 035
Durabrand 285, 361, 453
Dux 006
Dynatech 035
Dynatron 006
e-motion 380
E:max 256, 316
Easy Living 230, 326, 402
Ecco 162
ECE 006
Edison-Minerva 087
Eiki 150
Elba-Sharp 094
Elbe 102, 006, 113, 036, 028, 035, 042,
048, 062, 070, 075, 094, 099, 121
Elcit 014, 023, 094
Elekta 043, 045
Element 376
Elfunk 204, 222
ELG 006
Elin 006, 098, 061, 002, 017, 056
Elite 006, 036, 049
Elta 043, 002
Emerson 006, 144, 134, 444, 086, 061, 064,
010, 014, 027, 045, 049, 065, 119
Emperor 045
Envision 266
Epson 243, 184, 186
Erae 267
Erres 006
ESC 006, 035
Etron 002, 023
Eurofeel 043, 035
Euroman 006, 043, 064, 034, 035
Europa 006
Europhon 006, 035, 094
Evesham 230, 340, 370, 382, 387
Evesham Technology 387
Evolution 395
Excors 467
Expert 023, 032, 042
Exquisit 006
FairTec 268
Fenner 002, 066
Ferguson 006, 120, 098, 103, 030, 204, 012,
020, 029, 046, 052, 054, 077, 292,
447, 476
Fidelity 006, 061, 043, 023, 026, 029, 034,
065, 071, 093, 097
Filsai 035
Finlandia 098, 061, 011, 023, 033, 055
Finlux 102, 006, 144, 145, 333, 327, 172,
122, 118, 094, 089, 084, 083, 070,
055, 035, 023, 018, 017, 014, 011,
010
Firstline 102, 006, 144, 134, 204, 061, 341,
267, 265, 250, 215, 172, 119, 097,
070, 066, 056, 050, 035, 034, 033,
011, 002
Fisher 061, 064, 005, 008, 011, 014, 017,
033, 035, 056, 097
Flint 006, 113, 043, 036, 080, 011
Force 210
Forgestone 029
Formenti 006, 014, 023, 034, 049
Formenti-Phoenix 034, 049
Fortress 014, 015
Fraba 006, 064
Friac 006, 113, 064, 002, 091
14. Appendix
GB86
User’s Manual
Frontech 043, 002, 023, 035
Fujimaro 190
Fujitsu 002, 011, 032, 035, 042, 137, 173,
187
Fujitsu General 002, 032, 035, 137
Fujitsu Siemens 172, 211, 230, 246, 268, 369
Funai 144, 134, 043, 275, 336, 369, 407
Galaxi 006
Galaxis 006, 064
Gateway 394
GBC 036, 002, 023, 066
GE 015, 027, 045, 052, 079, 150, 442
GEC 006, 061, 011, 023, 035, 056, 094
Geloso 002, 023, 066
General 020, 046, 082
General Technic 002
Genexxa 006, 036, 002, 023, 071
Gericom 172, 190, 195, 220, 224, 246, 340,
388
Go Video 009
Gold 397, 413, 484, 485
Goldfunk 134
GoldHand 034
GoldStar 006, 144, 145, 111, 061, 001, 007,
020, 023, 027, 034, 035, 047, 067
Gooding 087
Goodmans 102, 006, 120, 144, 103, 134, 124,
444, 204, 087, 043, 036, 005, 478,
211, 232, 477, 250, 476, 271, 445,
355, 370, 373, 440, 376, 382, 383,
386, 002, 004, 011, 035, 047, 052,
054, 065, 066, 084, 091, 094, 119,
121, 133, 172, 195, 210
Gorenje 064
GPM 036
Gradiente 006, 025, 207
Graetz 144, 087, 061, 023, 053, 065, 211
Gran Prix 128
Granada 006, 098, 103, 005, 019, 038, 011,
023, 033, 035, 053, 054, 060, 081,
083, 094, 008
Grandin 102, 006, 144, 134, 204, 145, 113,
036, 080, 272, 270, 269, 246, 220,
215, 195, 190, 119, 066, 049, 045,
023, 002
Gronic 035
Grundig 102, 006, 030, 087, 142, 005, 108,
498, 476, 448, 447, 445, 430, 405,
370, 271, 267, 250, 225, 135, 121,
010, 101, 096, 028, 077
Grunkel 211
H & B 172, 456
Haier 138, 344, 392, 339
Halifax 043, 034, 035
Hallmark 027
Hampton 034, 035
Hanimex 036, 443
Hanns.G 402
Hannspree 262, 263, 264, 342, 401, 402, 463
Hanseatic 102, 006, 120, 144, 124, 061, 064,
172, 133, 097, 095, 091, 067, 056,
049, 048, 045, 035, 014, 002
Hantarex 006, 002, 094, 190, 260, 289
Hantor 006
Harsper 190
Harwa 162, 218, 238
Harwood 006, 087, 002, 071
Hauppauge 006
Havermy 015
HCM 006, 043, 036, 002, 035, 045, 071,
072
Hema 002, 035
Hemmermann 056, 097
Hi vox 020
Higashi 034
Highline 006, 043
Hikona 036, 452
Hinari 006, 043, 036, 005, 002, 033, 059,
077, 443
Hisawa 144, 113, 036, 080, 045
Hisense 102, 092, 165, 254, 265, 366, 491
Hit 014
Hitachi 006, 098, 124, 204, 208, 005, 019,
037, 146, 152, 153, 163, 169, 193,
197, 007, 206, 210, 217, 227, 295,
296, 330, 377, 399, 424, 483, 020,
021, 023, 027, 035, 054, 056, 060,
076, 081, 083, 084, 085, 089, 091,
094, 018, 106, 107, 011
Hitachi Fujian 019
14. Appendix
GB87
User’s Manual
Hitsu 113, 036, 080, 002
HMV 014
Hoeher 144, 190, 211, 327
Home Electronics 111
Hornyphon 006
Hoshai 036, 080, 045
Huanyu 034, 066
Hugoson 198, 224
Humax 505, 299, 506, 507, 245, 319, 322,
411, 433, 479
HYD 271
Hygashi 034, 035
Hyper 002, 034, 035
Hypersonic 061
Hypson 102, 006, 144, 134, 204, 086, 145,
043, 080, 035, 045, 118
Hyundai 164, 190, 192, 241, 244, 271, 291,
317, 338, 340, 341, 439
Iberia 006
ICE 006, 043, 036, 034, 035, 065
ICeS 036, 034
iDEAL 327
Igo 226
IISonic 271, 308, 342
Iiyama 193, 198, 224
Imperial 006, 064, 056, 072, 121, 487
Indiana 006
InFocus 212, 220, 283
Ingelen 144, 113, 087, 023
Ingersol 002
Inno Hit 036, 002, 011, 035, 045, 047, 094,
211
Innovation 095
Innowert 190, 246
Interbuy 006, 043, 002
Interfunk 006, 061, 014, 020, 023, 056, 093
Internal 102, 444, 119
Intervision 006, 086, 087, 043, 036, 080, 002,
035, 045, 067, 095
Irradio 006, 036, 002, 047, 065, 147
Isukai 006, 036, 080, 045
ITC 035, 049
ITS 006, 043, 036, 034, 045, 065
ITT 098, 113, 061, 023, 029, 033, 053
055, 056, 083, 084, 097
ITT Nokia 098, 113, 111, 061, 023, 033, 053
055, 056, 083, 084
ITV 006, 043, 066
JDV 451
Jean 005, 307, 308
JEC 004
JMB 102, 124, 077, 091
JNC 378
Jocel 143
Jouge 284
Jubilee 102
JVC 111, 036, 005, 129, 130, 015, 029
065, 072, 137, 149, 207, 264, 362
408, 496
Kaisui 006, 036, 080, 002, 034, 035, 045
Kamp 034
Kapsch 061, 017, 023, 032, 042
Karcher 144, 113, 111, 043, 064, 045, 164,
327, 451
Kathrein 102, 195
Kawa 065
Kawasho 034
KB Aristocrat 023
Kendo 006, 204, 113, 064, 062, 067, 070,
095, 099, 128, 210, 285, 333
Kennedy 023, 032, 075
Kennex 204
Keymat 258, 300, 398, 436, 437
Kingsley 034
Kioto 142
Kiss 170
Kiton 006, 134
Kneissel 102, 006, 113, 064, 042, 048, 062
066, 070, 075, 091
Kobra 290
Kolster 006, 036, 056
Konig 006, 016
Konka 006, 144, 036, 065, 072, 126, 158,
201
Kontakt 087
Korpel 006
14. Appendix
GB88
User’s Manual
Korting 064, 014, 049
Kosmos 006
Kotron 071, 440
Koyoda 002
Kreisen 192, 293
KTV 035
Kuba 056
Kyoshu 071, 072
Kyoto 023, 034, 035
L&S Electronic 144, 172, 190
LaSAT 086
Lava 293
Lavis 204
Leader 002
Lecson 006
Lemair 070
Lenco 006, 108, 017, 066, 352, 452
Lenoir 002, 214
Lentec 316
Lexsor 218, 303
Leyco 006, 043, 011
LG 102, 006, 144, 145, 138, 061, 064,
248, 281, 354, 367, 368, 384, 396,
416, 417, 425, 426, 215, 209, 067,
047, 035, 034, 027, 023, 002, 001,
236, 257
Liesenk & Tter 006
Liesenkotter 006
Lifetec 006, 144, 134, 204, 208, 036, 002
066, 095, 137
Lloyd’s 002
Local India TV 002, 033, 109, 280
Lodos 204, 210
Loewe 006, 064, 014, 048, 093, 094, 123
131, 167, 414, 434
Logic 494
Logik 204, 001, 003, 029, 162, 195, 224,
292, 376, 464, 465, 466
Logix 134, 095
Luker 451
Luma 204, 002, 023, 032, 042, 062, 066,
070
Lumatron 006, 043, 012, 023, 032, 035, 042
Lux May 006, 002
Luxor 098, 204, 061, 023, 033, 035, 047,
055, 056, 060, 083, 084, 122, 211
LXI 022
M Electronic 006, 144, 124, 030, 061, 361, 133,
093, 089, 084, 070, 066, 056, 055,
054, 046, 035, 034, 023, 020, 018,
017, 002
Madison 006
MAG 298, 376
Magnadyne 014, 023, 094, 097
Magnafon 012, 034, 094
Magnavox 005, 003
Magnin 442
Magnum 006, 144, 145, 128, 242
Mandor 043
Manesth 006, 043, 004, 035, 049
Manhattan 006, 134, 204, 164, 192, 237, 293
Maqma 290, 340, 378, 404
Marantz 102, 006, 071, 140, 277, 317
Marelli 014
Mark 006, 144, 145, 002, 034, 035, 066
Marks and Spencer 420
Marquant 478
Mascom 327, 432
Master’s 091
Masuda 036
Matsui 102, 006, 144, 030, 204, 087, 005,
080, 074, 153, 195, 097, 094, 369,
445, 077, 447, 065, 059, 056, 052,
044, 035, 033, 028, 011, 008, 004,
003, 002
Matsushita 129
Maxent 394, 160
Maxim 213, 327, 451
Medialine 220, 449
Mediator 102, 006
Medion 102, 006, 144, 134, 204, 138, 208,
172, 195, 093, 040, 210, 213, 219,
230, 285, 327, 370, 440, 456
Megas 113
Megatron 021, 027
MEI 204
Memorex 204, 002, 009, 027
14. Appendix
GB89
User’s Manual
Memphis 002, 011
Mercury 006, 002
Metronic 120
Metz 006, 134, 030, 108, 014 ,028, 063
096, 101, 211, 318
MGA 027, 442
Micromaxx 006, 134, 204, 121, 172, 256, 456
Microspot 343
Microstar 172
Mikomi 204, 153, 210
Minato 006
Minerva 030, 087, 019, 010, 028, 094, 096,
101
Minoka 006, 071
Mirai 369, 423, 482
Mirror 440
Mistral Electronics 029
Mitsai 327
Mitsubishi 102, 006, 204, 005, 019, 014, 015,
027, 093, 096, 191, 311
Mivar 034, 035, 047, 048, 094, 112
Mogen 374, 410
Monaco 002
Morgan’s 006
Motorola 015
MTC 064, 009, 034, 056, 093
MTEC 044
MTlogic 144, 473
Multibroadcast 029
Multitec 006, 134, 204, 086, 327
Multitech 006, 086, 043, 064, 002, 034, 035
Murphy 017, 023, 034
Musikland 036
Mx Onda 298, 376
MyCom 271
Myrica 369
Myryad 102
NAD 006, 061, 190
Naiko 006, 111, 157, 451
Nakimura 006, 066
Narita 451
NAT 038
National 038
NEC 005, 002, 003, 025, 035, 040, 049,
066, 140, 239, 379
Neckermann 102, 006, 064, 014, 028, 049, 056,
070, 072, 101
NEI 006, 204, 065
Neon 237, 389
Neovia 190, 192, 220, 260, 267, 268, 271,
273, 449, 454
Nesx 389
Netsat 006
NetTV 160
Neufunk 102, 006, 144, 113, 036, 002
New Tech 102, 006, 002, 035, 054
New World 036
Nextier 338
NFREN 170
Nicam 097
Nicamagic 034
Nikkai 006, 043, 036, 005, 002, 004, 011,
034, 035
Nikkei 144
Nikko 027
Nobliko 010, 034
Nogamatic 020
Nokia 098, 113, 111, 061, 023, 033, 049,
053, 055, 056, 066, 083, 084, 089,
122
Norcent 266, 335
Nordic 035
Nordmende 006, 144, 103, 030, 020, 046, 054,
242, 280, 499
Normerel 006
Northern Star 220
Novatronic 006, 018, 066
Novita 273
Oceanic 098, 061, 023, 033, 083
Odeon 043
Okano 006, 043, 064, 002, 011
Olidata 271
Omega 043
Onida 207, 226
Onimax 144
14. Appendix
GB90
User’s Manual
Onn 380, 465, 477, 495, 497, 500, 501
Onwa 036, 074, 065, 109
Onyx 380, 397
Opera 006
Optimus 129, 024
Optoma 234, 346, 371
Orbit 006
Orcom 300
Orion 102, 006, 144, 204, 467, 458, 457,
456, 448, 445, 443, 385, 218, 195,
131, 097, 094, 077, 071, 059, 050,
049, 003
Orline 006, 036
Ormond 134, 204
Orsowe 094
Osaki 102, 006, 043, 036, 011, 035, 044,
059, 066, 071
Osio 006, 047
Oso 036
Osume 006, 036, 005, 011
Otic 298, 376
Otto Versand 102, 006, 030, 061, 005, 038, 028,
020, 035, 049, 054, 056, 015, 093,
096, 097, 101
Paci c 102, 144, 204, 208, 077, 256
Packard Bell 254, 293
Pael 034
Palladium 102, 006, 144, 064, 208, 035, 056,
028, 070, 072, 095, 101, 023, 121,
131 ,014
Palsonic 006, 138, 043, 001, 035, 072, 218,
238, 303
Panama 006, 043, 002, 034, 035
Panasonic 006, 098, 061, 129, 038, 023, 063,
094, 187, 251, 294, 353, 359, 279,
306
Panavision 006, 070
Pathe Cinema 023, 034, 048, 049
Pathe Marconi 020
Pausa 002
Penney 009, 022, 027, 442
Perdio 006, 011, 023, 034, 045, 049
Perfekt 006
Petters 006
Philco 006, 064, 014, 021, 072
Philex 029
Philharmonic 035
Philips 102, 006, 061, 459, 435, 429, 395,
310, 302, 297, 247, 125, 110, 101,
073, 066, 054, 029, 014, 002
Phocus 144, 242, 250, 361, 405
Phoenix 006, 086, 064, 011, 014, 023, 034,
049
Phonola 102, 006, 014, 029, 034
Pilot 142
Pioneer 006, 086, 061, 064, 020, 023, 024,
046, 073, 093, 136, 159, 233, 277,
286, 381
Pionier 086, 064, 327
Plantron 006, 043, 002
Playsonic 006, 144, 145, 035, 053, 361, 405
Polaroid 298, 312, 355, 376, 383, 390, 240
Poppy 002
Portland 066, 119
Powerpoint 006, 138, 087, 201
Prandoni-Prince 061, 094
Precision 035
Premier 199
Prima 043, 002, 071, 218, 238, 303
PrimeView 340
Prinston 204, 145
Prinz 061, 011, 056, 097
Profex 061, 002, 023
Pro 002
Pro lo 327
Pro tronic 006
Proline 006, 120, 124, 204, 011, 050, 070,
118, 121, 271, 324, 386, 450
Prosco 002
Prosonic 006, 144, 134, 064, 034, 035, 065,
066, 389, 403, 428, 437, 467, 486
Protech 006, 134, 204, 086, 043, 002, 035,
045, 056, 072
Proton 027
ProVision 102, 006, 144, 256
Proxima 150, 152
Pvision 192, 310, 456
14. Appendix
GB91
User’s Manual
Pye 102, 006, 014, 056, 066, 101
Pymi 002
QONIX 352
Quadral 036
Quasar 002, 190
Quelle 006, 134, 030, 204, 061, 101, 097,
096, 093, 056, 028, 020, 017, 010,
003
Questa 005
R-Line 006
Radialva 036, 023
Radiola 102, 006, 035
Radiomarelli 006, 014, 094
RadioShack 006, 027
Radiotone 006, 134, 204, 043, 064, 002, 071,
072, 128
Rank 010
Rank Arena 005
RBM 010
RCA 120, 015, 442
RealiTV 237
Reality 237
Recor 006
Rectiligne 006
Redi usion 098, 061, 005, 055
Redstar 006
Re ex 006, 134, 204
Relisys 190, 192, 193, 194, 220, 221, 271,
310, 333, 338, 341, 355, 390
Remotec 006, 015, 021, 026
Reoc 144
Revox 006
Rex 043, 023, 032, 042, 070, 099
RFT 006, 043, 011, 014
Roadstar 006, 144, 134, 204, 145, 043, 036,
002, 045, 072, 214, 440
Robotron 014
Rolson 178, 267
Rover 193
Royal Lux 064, 052, 071
Saba 120, 098, 144, 103, 061, 014, 020,
023, 046, 052, 054, 090, 094, 335
Sagem 113, 080, 182, 253, 337
Saisho 043, 002, 003, 023, 035, 094, 097
Saivod 006, 134, 204, 143, 211, 327, 451
Sakai 023
Salora 098, 061, 023, 033, 047, 056, 060,
084, 094, 118, 122, 213, 219, 327
Salsa 052
Sambers 094
Sampo 394, 160
Samsung 102, 006, 043, 064, 108, 115, 231,
252, 276, 287, 332, 345, 350, 351,
372, 442, 474, 488, 490, 492, 228,
176, 175, 127, 095,047, 035, 034,
033, 027, 023, 011, 009, 002
Sandra 034, 035
Sansui 006, 142, 131, 148, 189, 267, 326
Santon 002
Sanyo 204, 064, 005, 019, 442, 370, 363,
358, 357, 356, 222, 200, 150, 140,
097, 053, 048, 035, 034, 033, 025,
023, 017, 011, 008, 003, 002, 240
SBR 102, 006, 029
Schaub Lorenz 098, 144, 086, 111, 061, 056, 066,
215, 256, 267
Schneider 102, 006, 144, 134, 204, 061, 208,
036, 451, 450, 293, 128, 097, 095,
065, 056, 054, 042, 035, 023, 010
Scotch 027
Scotland 023
Scott 214
Sears 022, 026, 027
Seaway 124
Seelver 204
SEG 006, 134, 204, 087, 043, 036, 005,
285, 211, 210, 119, 062, 056, 035,
034, 002
SEI 006, 014, 023, 032, 056, 094, 097
Sei-Sinudyne 006, 014, 032, 094, 097
Seleco 023, 032, 042, 055, 062, 065, 070,
075, 099
Semp 022
Sencora 002
Sentra 004
Serino 113, 080, 015, 034
Sharp 005, 130, 216, 015, 029, 088, 094,
177, 274, 334, 365, 409, 166, 288
14. Appendix
GB92
User’s Manual
Shintoshi 006
Shivaki 006, 077
Siarem 014, 023, 094
Siemens 006, 030, 028, 096, 101
Siera 102, 006
Siesta 064
Silva 006, 061, 034, 128
Silva Schneider 006, 213, 327, 451
Silvano 108
Silver 145, 061, 005
SilverCrest 204
Singer 006, 074, 002, 014, 052, 075
Sinotec 162
Sinudyne 006, 061, 014, 023, 032, 056, 094,
097
Skantic 060
SKY 006, 195, 271, 300, 307, 308, 340,
341, 342, 343, 344, 391, 400, 421
SKY Brazil 195
Sliding 170, 190, 195, 256, 269, 270, 272
SLX 134
Smaragd 087
Soemtron 190, 246
Sogera 049
Sogo 271, 473
Solavox 006, 098, 061, 011, 023
Sonawa 036
Soniko 006
Sonitron 064, 033, 035, 053
Sonix 271, 389
Sonneclair 006
Sonoko 006, 043, 002, 035, 045
Sonolor 098, 061, 023, 033, 045
Sontec 006, 064, 002
Sony 006, 301, 005, 446, 412, 393, 375,
360, 325, 255, 203, 185, 174, 058,
003
Sound & Vision 036, 066
Soundesign 027
Soundwave 006, 204, 145, 049, 072, 420
Spectra 002
Squareview 026
Ssangyong 002
Standard 006, 204, 036, 002, 035, 049, 066,
380
Starlite 006, 043, 002, 023
Stenway 036, 045
Stern 043, 023, 032, 042, 070, 099
Strato 006, 043, 002, 403
Strong 210, 211
Stylandia 035
SunBrite 284
Sungoo 470
Sunkai 113, 087, 036, 080, 050, 059, 190
Sunstar 006, 043, 002, 065
Sunstech 456
Sunwood 006
Superla 034, 035, 094
SuperTech 102, 006, 036, 002, 034
Supra 002, 066
Susumu 036, 046, 052
Sutron 002
SVA 108, 190
Swedx 340
Swiss ex 481
Swisstec 481, 480, 422, 421, 401, 400, 391,
344, 343, 342, 341, 340, 308, 307,
300, 271, 195, 190
Sydney 034, 035
Sylvania 026, 275, 427
Sysline 006
Sytong 034
Tactus 044
Tandberg 061, 020, 063
Tandy 036, 011, 015, 023, 035
Targa 237, 267
Tashiko 005, 023, 025, 034, 035
Tatung 006, 003, 011, 035, 044, 094, 118,
215, 230, 256, 267, 326, 327, 382,
383, 395
TCL 142, 321
TCM 144, 172, 242, 456
Teac 006, 144, 134, 138, 143, 043, 080,
002, 025, 026, 027, 056, 093
Tec 006, 002, 035, 042, 052, 082
14. Appendix
GB93
User’s Manual
Tech Line 006, 134, 211, 285
Tech Lux 214
Techica 036
Technema 049
Technica 118, 451
Technics 102, 129
Technika 422, 428, 465, 468, 480, 493
TechniSat 102, 131, 237
Technisson 144, 242, 361
Technosonic 102, 120, 091, 195, 256, 258, 436,
437, 451, 468
Technotrend 316, 378
Techwood 204, 211
Teckton 271
Tecnimagen 102
Tec o 205
Tedelex 002, 035, 380
Teiron 002
Tek 168
Teknika 009
TELE System 192
Teleavia 046, 054
Telecor 006, 036, 023, 035, 042
Telefunken 006, 120, 144, 103, 086, 320, 202,
105, 090, 082, 055, 054, 052, 046,
020, 016, 012, 348
Telefusion 006
Telegazi 006, 043, 036, 023, 042
Telemagic 150
Telemeister 006, 049
Telesonic 006
Telestar 102, 006
Teletech 006, 134, 204, 002
Teleton 005, 032, 035, 042, 056
Televideon 023, 034, 049
Teleview 006
Tempest 002
Tennessee 006
Tensai 006, 204, 145, 036, 002, 017, 018,
035, 049, 065, 066, 067
Tenson 002, 049
Tevion 102, 006, 144, 134, 204, 208, 468,
405, 403, 376, 355, 327, 298, 246,
242, 232, 230, 172, 128
Texe t 036, 002, 034, 035, 066
Texla 165
Thes 467, 469, 471
Thomson 006, 120, 103, 020, 046, 052, 054,
056, 082, 335
Thorn 006, 061, 005, 100, 096, 093, 091,
054, 052, 044, 029, 020, 017, 012,
011, 004
Thorn-Ferguson 012, 029, 052, 054, 091
Time 378, 454, 455
Tiny 238
TMK 027
Tobishi 310
Tok ai 006, 134, 204, 002, 011, 023, 035,
066
Tokaido 204
Tok yo 004, 034
Tomashi 036, 045
Topline 134, 204
Toshiba 030, 204, 005, 115, 129, 092, 447,
364, 313, 304, 242, 212, 211, 183,
100, 039, 022, 020, 010, 009, 004,
236, 257
Tosumi 451
Towada 035, 056
Toyo da 002
Trakton 043
TRANS-continents 102, 006, 134, 204, 035, 118, 190,
269, 272
Transonic 006, 108, 002
Transtec 034
Trident 035, 094
Trio 298, 376
Tristar 043, 036, 029
Triumph 102, 006, 055, 094
Tsoschi 045
TVTEXT 95 102
TWF 432
Uher 006, 086, 064, 032, 042, 049, 066,
072, 084
Ultravox 006, 014, 023 034, 066
14. Appendix
GB94
User’s Manual
UMC 308, 340, 343, 391, 400, 422, 480,
481, 493
Unic Line 006, 080, 083
United 006, 144, 204, 145, 108, 397, 445,
451
Universal 006
Universum 006, 134, 030, 204, 061, 043, 064,
005, 115, 070, 072, 083, 084, 089,
093, 096, 097, 101, 122, 172, 211,
285, 062, 056, 055, 047, 035, 025,
020, 018, 017, 010, 003, 002
Univox 006, 014, 023
V2max 190
V7 Videoseven 195, 224, 237, 271, 369, 394
Venturer 324, 386, 428
Vestel 006, 134, 204, 035, 211, 333, 370
Vexa 006, 002
Vibrant 044
Victor 005
Videocon 092
Videologic 036, 034
Videologique 036, 034, 035
VideoSystem 006
Videotechnic 034, 035, 049, 066
Videoton 023, 060
Vidikron 150, 277
Vidtech 027
Viewpia 192
Viewsonic 307, 308, 323, 335, 349, 391, 394,
259, 331
Visiola 034
Vision 006, 035, 049
Vistar 032
Vistron 265, 460
Vivax 250, 258
Vivid 250
Vortec 006
Voxson 006, 014, 023, 072
Waltham 006, 134, 204, 020, 035, 060, 072,
077
Wards 009, 022, 024, 027
Watson 006, 144, 134, 204, 036, 002, 023,
049, 095, 271, 285
Watt Radio 023, 034, 056, 097
Wega 006, 005, 014
Wegavox 002
Welltech 014
Weltblick 035, 049
Weltstar 204
Westinghouse 189
Wharfedale 102, 006, 095, 189, 256, 327, 370,
452, 453, 477, 502
White Westinghouse 006, 034, 049, 119
Wilson 102
Windsor 134, 204
Windstar 045
Windy Sam 102
World-of-Vision 190, 193, 195, 198, 224, 242, 246,
340, 389
X-View 215
Xenius 124, 133
XLogic 188
Xomax 397
Xoro 218, 224, 229, 303, 404, 503
Xrypton 006
Yakumo 342
Yalos 398
Yamaha 169, 314, 330, 184
Yamishi 006, 036, 080, 035, 045
Yo k a n 006
Yo k o 006, 043, 064, 036, 002, 034, 035,
053
Yo r x 036
Ytawai 316
Zanussi 032, 035
Zenith 119, 236
Zenor 053
TV/VCR Combo
Aiwa 445
Amstrad 026
Beko 086
Black Diamond 444
Blue Sky 119, 445
Daewoo 444, 119
Dantax 445
Emerson 444, 119
14. Appendix
GB95
User’s Manual
Ferguson 120, 012
Fidelity 026
Finlux 017
Firstline 119
GE 015, 442
GoldStar 006
Goodmans 444, 066, 119, 445
Grandin 119
Grundig 102, 006, 030, 101, 445
Hanimex 443
Hinari 005, 443
Internal 444, 119
Irradio 147
LG 027
Magnin 442
Matsui 445
MGA 442
Mitsubishi 102, 015
Orion 443, 445
Penney 442
Philips 102, 006
Portland 119
Radiola 102
RCA 015, 442
Saba 120
Samsung 442
Sanyo 442
Schneider 102, 006
SEG 119
Sharp 015
Siemens 006
Sony 301, 446
Teac 026
Technics 102
Thomson 120
United 445
Universum 018
White Westinghouse 119
TV/VCR/DVD Combo
Bush 448
Ferguson 447
Grundig 448
Matsui 447
Orion 448
14. Appendix
GB96
User’s Manual
3. DVD Code List
Brand Code
3D LAB 038
4Kus 106
A-Trend 063
Acoustic Solutions 066, 062, 114, 193, 208
AEG 073, 077, 058, 075, 113, 181
AFK 105, 181
Airis 057, 081, 109, 117, 216
Aiwa 036, 115
Akai 077, 075, 093, 100, 113, 162, 212
Akira 149
Akura 093, 103, 113, 136
Alba 038, 059, 066, 057, 062, 064, 103,
140, 162, 185, 216
Alize 104
Altacom 109
Amitech 073, 013, 087
Amstrad 073, 077, 062, 104, 136
Amuseer 120
AMW 091
Ansonic 082, 071, 120, 136
Apex Digital 057, 094, 116, 134
Arena 100
Aristona 038, 052, 214
ASCOMTEC 181
Asono 109
Atacom 109
Audiola 149, 224
Audiosonic 181, 216
Audix 062
Autovox 062
Auvio 086
Axion 066
Basic Line 062, 185
Baze 093
BBK 109
Bellagio 094
Bellwood 081
Belson 136, 181
Belsonic 136
Berthen 156
Binatone 181
Biostek 148
Black Diamond 062
Blu:sens 113, 117
Blue Nova International 117
Blue Sky 059, 077, 057, 062, 086
BlueTinum 136
Boghe 094
Boman 093
Bose 189
Brainwave 073, 100
Brandt 033, 039
Broksonic 059
Bush 066, 082, 057, 062, 064, 065, 103,
120, 127, 129, 140, 162, 172, 216,
217
Cambridge Audio 070
Cat 076, 181
CCE 066
cello 164, 198, 205
Centrum 058, 062, 076, 110, 181, 185
CGV 070, 100
Chili 135, 136
Cinea 085
Cinetec 062, 091
CJ Digital 156, 204
Classic 066, 164
Clatronic 057, 058, 075, 113, 181
Clayton 062
CMX 156
Coby 066, 120
Codex 113
Commax 117, 135
Compacks 081, 211
Contel 075
Continental Edison 082, 091
Crown 073, 062, 100
Cybercom 082
CyberHome 063
14. Appendix
GB97
User’s Manual
Cytron 061, 119
D-Vision 100
Daenyx 091
Daewoo 073, 018, 061, 063, 083, 091, 129,
130, 159
Dalton 097
Dansai 073, 100, 162
Dantax 038, 077, 062, 065, 122
Daytek 091
Dayton 091,106
DCE 082
Decca 073, 100
Denon 032, 049, 151
Denver 057, 075, 093, 117, 128, 136, 148,
181, 216
Denzel 055
Desay 086
Dgtec 057
Difrnce 211
Digihome 062
DigiLogic 062, 159
Digitech 172
Digitek 013
Digitrex 217
Digix Media 081
DiK 082
Dinamic 075
Disney 082
DiViDo 061
DK Digital 082, 116
Dragon 082
DreamX 104
DSE 164
Dual 066, 082, 077, 055, 062, 129, 140
Durabrand 082, 058, 062, 128, 140, 159
E:max 026, 113, 117, 156, 161
eBench 105
ECC 066
Eclipse 065, 070
Elfunk 062, 087
Elin 073
Ellion 013, 087
Elta 073, 057, 075, 087, 100, 104, 113,
161, 204
Eltax 113, 117, 149
Emerson 043, 061
Enterprise 043
EuroLine 058, 075, 100, 113, 120, 131, 156
F&U 203
Ferguson 059, 062, 093, 162, 164
Finlux 067, 043, 073, 057, 070
Fintec 140
Firstline 062, 086, 090, 140
Fisher 056
Funai 059, 058
Gateway 106
GE 064
Global Link 109
Global Solutions 072
Global Sphere 105
Go Video 090
Gold 198
GoldStar 067, 043
Goodmans 066, 077, 062, 065, 094, 103, 105,
116, 140, 164, 181, 217
GoWell 156
GPX 067
Graetz 055
Gran Prix 082, 093
Grandin 062, 113, 116, 204
Greenhill 064
Grundig 038, 039, 059, 077, 056, 061,
062,094, 097, 129, 156, 162, 164,
172
Grunkel 073, 082, 077, 136
GVG 073
H & B 013, 062, 085, 087, 113, 204
Hanseatic 067, 077
Harman/Kardon 060, 111, 135
Harwa 211
HCM 075
HDT 061
HE 066, 181
Henss 062
14. Appendix
GB98
User’s Manual
Hikona 124
HiMAX 086
Hitachi 042, 054, 062, 185
Hiteker 057, 181
Hoeher 082 ,062, 081, 094, 109, 140
Home Electronics 073, 066
Home Tech Industries 109, 156, 181
HotMedia 105
Humax 052, 225
HYD 113
Hyundai 087
Ingelen 075
Inno Hit 062
International 159
Irradio 090, 100, 109, 113
ISP 059
it’s 064
Jamo 097
Jaton 055
JDB 066
JGC 140
JMB 059
JVC 045, 038, 033, 107, 147, 176
Kansas Technologies 113, 140
Kazuki 136
Kendo 082, 057, 062
Kennex 073, 062, 093
Kenwood 032, 037
KeyPlug 156
Kiiro 073
King Vision 136, 156
Kiss 055, 085
KXD 088, 117, 135, 181
Lawson 072
Leiker 091
Lenco 073, 062, 124
Lexia 072
LG 067, 043, 077, 090, 143, 179, 186
Lifetec 082, 119
Limit 072
LiteOn 106, 126, 157, 165
LM 156
Lodos 062
Loewe 038, 067
Logic 222
Logik 062
Logix 061
Lumatron 067, 059, 061, 062, 100, 117, 172,
215
Lunatron 067
Luxman 042
Luxor 062, 064, 094, 162, 164
Magnat 181
Magnavox 038, 033, 052, 058, 062, 103
Magnex 065
Magnum 129
Majestic 149, 224
Manhattan 061, 062
Manta 136
Marantz 038
Mark 062
Marquant 073, 217
Matsui 059, 057, 062, 094, 162, 164
Maxim 062, 091, 114
MBO 066, 164
MDS 062
Mecotek 073
Mediencom 070
Medion 067, 082, 119, 157
MEI 077
Memorex 082
Metz 041, 035, 062, 185
MiCO 065, 070, 116
Micromaxx 059, 162
Micromedia 038, 033
Micromega 038
Microsoft 163, 194
Microstar 082
Minax 062
Minoka 073, 100
Mitsubishi 062
MixSonic 101
Mizuda 073
14. Appendix
GB99
User’s Manual
Monyka 055
MPX 086
MTlogic 216
Mustek 066, 148, 164
Muvid 136, 156, 204
Mx Onda 070, 116
Myryad 116
Mystral 082
NAD 067
Naiko 073, 094
Neom 136, 156
Neon 013
Neufunk 055
Nevir 073, 082, 057
Nexius 077
Next Base 160
NFREN 081
Nikkai 181
Nikkei 116
Norcent 181
Nordmende 082
Nortek 204
Oasis-Media 148
Olidata 057
Onkyo 033, 046, 169
Onn 223
Onyx 198
Oopla 106
Opera 215
Optim 086
Optimus 035
Orbit 091, 156
Orion 059, 062, 113, 127, 162
Ormond 062
Paci c 082, 072, 077, 062, 071
Packard Bell 082, 117, 158
Palladium 059, 062, 179
Panasonic 032, 146, 155, 173, 178, 180
Panda 076, 135
peeKTon 093, 109
Philips 038, 033, 052, 058, 106, 118, 121,
137, 167, 170, 191, 192, 195, 196,
210, 209
Pioneer 041, 035, 016, 048, 133, 141, 145,
175, 183, 220
PJ 181
Play It 156
Plu2 087
Polaroid 134
Powerpoint 091
Prinz 082
Prism 082, 061
ProCaster 094, 200
Proline 057, 094, 122, 165, 193
Proson 062
Prosonic 130, 208
ProVision 066, 117, 136, 181
Pye 038, 052
QONIX 077
Quartek 158
Radionette 067, 090, 179
Radiotone 062
Raite 055
RCA 168
REC 032
Redstar 073, 071, 075, 093, 125, 181
Relisys 119
Reoc 072, 092
Revoy 085
Richmond 113
Roadstar 066, 057, 062, 093, 110, 172
Ronin 091
Rotel 045
Rowa 064
Rownsonic 076
Saba 039, 204
Saivod 082, 071
Salora 067
Sampo 117
Samsung 032, 042, 017, 022, 069, 099, 152,
166, 182, 197, 199, 219, 080
Sansui 059, 013, 070
14. Appendix
GB100
User’s Manual
Sanyo 056, 062
Scan 061, 087
ScanMagic 066, 164
ScanSonic 162
Schaub Lorenz 073, 075, 100, 104, 156
Schneider 038, 082, 052, 077, 061, 062, 075,
090, 110, 122, 214
Schoentech 062
Scienti c Labs 072
Scott 057, 097, 113, 125, 181
Seeltech 109, 156
SEG 055, 062, 091, 140, 185, 215
Shanghai 057
Sharp 058, 062, 090, 127
Sherwood 067, 064
Shinco 064
Siemssen 123
Sigmatek 109, 200
Siltex 109
Silva 075, 093
Silva Schneider 067, 082, 090, 093
SilverCrest 014, 015, 105
Sinudyne 116
Sistemas 057
Skantic 038, 062
SKY 013
Skymaster 066, 072
Skyworth 093
Sliding 100
SM Electronic 066, 072, 105
Smart 061, 062
Sogo 136, 203, 216
Sontech 131
Sony 036, 089, 096, 098, 139, 142, 150,
171, 177, 184, 188, 190, 201, 202
Sound Color 113
Soundmaster 072
Soundwave 062, 140
Standard 082, 072, 075, 093
Star Clusters 105, 110
Starmedia 109
Stein 148
Strato 105, 123
Strong 062
Sunkai 073, 087
Sunstar 001
Sunstech 082, 148, 149
Suntronic 001
Sunwood 075, 093
Supervision 072, 105
Supratech 203, 213
SVA 057
Swisstec 206, 218
Sylvania 058, 207
Symphonic 058
Synn 072
Syscom 081
Sytech 148, 200
Tamashi 125
Tandberg 062, 162, 185
Tangent 117
Targa 110, 157, 179
Tatung 073, 162
Tchibo 067
TCM 067, 077
Teac 067, 072, 061, 064, 071, 110
Tec 093
Technica 162
Technics 032, 178
Technika 073, 082, 100, 140, 162, 206, 208,
218, 221
Technisson 100
Technosonic 100
Techwood 062, 140, 185
Telefunken 039
Teletech 072, 062
Tensai 073
Tevion 093, 097, 110, 123, 131, 164, 181,
215
Textorm 136
Theta Digital 041
Thomson 039, 116, 160, 168
Time 013
Tok ai 077, 055, 075, 093, 113
14. Appendix
GB101
User’s Manual
Tom-Tec 076, 148
Top Suxess 109
Toshiba 033, 059, 132, 138, 153, 154, 169,
187
TRANS-continents 082, 081, 091, 113, 117
Tredex 086
Trevi 082
TSM 109
TVE 062
Umax 104
UMC 206, 218, 221
United 059, 066, 058, 062, 075, 081, 100,
105, 113, 120, 131, 156, 172, 198
Universum 067, 043, 077, 062, 090, 110, 140
Vecatech 136
Venturer 077, 169, 193, 208
Vestel 062, 140, 185
Vieta 061
Voxson 066, 082
Waitec 066, 104, 109, 113
Walkvision 064
Waltham 062, 140
Welkin 082
Wellington 062
Weltstar 062
Wharfedale 077, 062, 070, 100, 124, 172
Wilson 082, 113
Windsor 062
Windy Sam 042
Wintel 101
Woxter 104, 109
Xbox 163, 194
Xenius 077
Xomax 198
Xoro 108, 226
Yakumo 094
Yamada 091, 094, 104, 106, 126, 135, 136
Yamaha 032 ,038, 052, 079
Yamakawa 055, 091, 215
Yukai 066, 164
Zenith 033, 043
TV/DVD Combo
Acoustic Solutions 193, 208
Airis 216
Akai 212
Alba 216
Audiosonic 216
Bush 062, 216, 217
cello 198, 205
Dantax 122
Denver 128, 216
Digitrex 217
Gold 198
Hikona 124
Logic 222
Marquant 217
MTlogic 216
Onn 223
Onyx 198
Philips 210
Proline 193
Prosonic 208
Sliding 100
Sogo 216
Swisstec 218
Technika 208, 221
UMC 221
Venturer 193, 208
TV/VCR/DVD Combo
Ferguson 059
Matsui 059
14. Appendix
GB102
User’s Manual
4. VCR Code List
Brand Code
Accent 009
Adventura 001
Adyson 009
Aiwa 003, 028, 001, 029, 002, 068, 102
Akai 028, 029, 023, 012, 020
Akiba 009
Akura 009
Alba 010, 021, 028, 001, 009, 029, 023
Allorgan 020
Allstar 010
America Action 021
Amstrad 021, 001, 009
Anam 021, 003, 019, 020
Anam National 019
Anitech 009
Ansonic 001
Aristona 010
ASA 010, 003
Asha 020
Asuka 010, 003, 001, 009
Audiolab 010
Audiosonic 021
Audiovox 003
AVP 001, 029
Awa 003, 024, 005
Baird 021, 001, 011, 012
Basic Line 021, 009, 011
Beaumark 020
Beko 011
Bell & Howell 011
Bestar 021
Black Diamond 051
Black Panther 021
Blaupunkt 010, 019
Blue Sky 021, 003, 028, 051, 009, 029, 031,
068, 102
Bondstec 009
Brandt 024, 025
Brinkmann 028
Bush 010, 021, 028, 001, 051, 009, 029,
023, 068
Calix 003
Carena 010
Carrefour 006
Carver 010
Casio 001
Cathay 021
CCE 021, 009
Centrum 044
CGE 001
Cimline 009
Cineral 021
Citizen 021, 003
Clatronic 001, 009
Colt 009
Combitech 029
Condor 021
Craig 003, 009, 020
Crown 021, 003, 009, 031
Cybernex 020
Cyrus 010
Daewoo 021, 050, 051, 029, 006
Dansai 021, 009
Dantax 029, 068
Daytron 021
De Graaf 010, 011, 007, 004
Decca 010, 001, 029, 008
Deitron 021
Denko 009
Denon 004
Diamant 003
Dual 010, 021, 028, 001
Dumont 010, 001, 011
Durabrand 051, 044
Elbe 021
Elcatech 009
Electrophonic 003
Elin 020
Elsay 009
14. Appendix
GB103
User’s Manual
Elta 021, 009
Emerex 002
Emerson 021, 050, 003, 001, 009, 006, 005
ESC 021, 020
Ferguson 021, 028, 001, 024, 025, 068
Fidelity 001, 009, 029, 030, 020
Finlandia 010, 003, 001, 011, 007, 005, 004,
012, 019
Finlux 010, 001, 011, 004
Firstline 021, 003, 028, 009, 006, 005, 004,
031, 102
Fisher 011
Flint 028
Frontech 009
Fujitsu 001
Funai 001, 044
Galaxi 001
Galaxis 021
Garrard 001
GE 007, 020
GEC 010
General Technic 028
Genexxa 011
Go Video 030, 102
GoldHand 009
GoldStar 003, 001, 031, 102
Goodmans 010, 021, 050, 003, 028, 001, 051,
009, 029, 020, 068
GPX 003
Gradiente 001
Graetz 011, 020
Granada 010, 003, 001, 011, 007, 004, 019,
020
Grandin 021, 003, 001, 009, 068
Grundig 010, 028, 009, 024, 029, 019, 068
Hanimex 029
Hanseatic 010, 003
Harley Davidson 001
Harwood 009
HCM 009
Hinari 021, 009, 029, 020
Hisawa 029
Hischito 006
Hitachi 010, 001, 004, 020, 044
Hoeher 021, 051
Hornyphon 010
Hughes Network
Systems
004
Hypson 021, 003, 001, 009, 029, 031
Imperial 001
Ingersol 020
Inno Hit 009
Interbuy 003, 009
Interfunk 010, 011
Internal 021, 050
International 021, 003, 051
Intervision 021, 003, 028, 001
Irradio 010, 003, 009, 102
ITT 011, 012, 020
ITV 021, 003
JBL 021
JMB 028, 029, 068
Joyce 001
JVC 008
Kaisui 009
Karcher 010, 021, 051
KEC 021, 003
Kendo 021, 003, 028, 051, 009, 023, 012
Kenwood 008
KLH 009
Kneissel 021, 003, 028, 029
Kodak 003
Korpel 009
Kyoto 009
Lenco 021
Leyco 009
LG 021, 003, 001, 031, 102
Lifetec 028
Lloyd’s 001
Loewe 010, 144, 003
Logik 009, 012, 020
Lumatron 044, 102
Lunatron 102
Lux May 009
14. Appendix
GB104
User’s Manual
Luxor 009, 011, 007, 005, 023, 012
LXI 003
M Electronic 003, 001
Magnasonic 021, 044
Magnavox 010, 001
Magnin 020
Magnum 051
Manesth 010, 009, 006
Marantz 010
Mark 021, 001
Mascom 051
Mastec 051
Master’s 021
Matsui 003, 028, 029, 020, 068
Mediator 010
Medion 028, 051, 029
Memorex 003, 028, 001, 011, 007, 020
Memphis 009
Metronic 010
Metz 010, 144, 003, 019, 084
MGA 005, 020
MGN Technology 020
Micormay 028
Migros 001
Minolta 004
Mitsubishi 010, 051, 008, 007, 005, 031
Motorola 007
MTC 001, 020
Multitec 003
Multitech 001, 009
Murphy 001
Myryad 010
NAD 011
Naiko 028, 051
National 019
NEC 003, 011, 008
Neckermann 010
Nesco 001, 009
Neufunk 102
Nikkai 021, 009
Nikko 003
Noblex 020
Nokia 010, 021, 011, 007, 004, 023, 012,
020
Nordmende 051, 024, 008, 025
Oceanic 010, 001, 024, 011 ,007, 012
Okano 021, 028, 009, 023
Olympus 019
Onimax 051
Optimus 007, 030, 044
Orbit 009
Orion 028, 029, 068
Orson 001
Osaki 003, 001, 009
Osume 009
Otto Versand 010
Pace 029
Paci c 028, 001, 051, 068
Palladium 003, 028, 009
Palsonic 001, 009
Panasonic 144, 019, 084
Pathe Cinema 005
Penney 003, 004, 020
Pentax 004
Perdio 001
Philco 009
Philips 010, 044
Phoenix 021
Phonola 010
Pilot 003
Pioneer 010, 008, 004
Portland 021, 050
Prinz 001
Pro tronic 010, 020
Proline 021, 001, 051, 024, 025
Prosco 021
Prosonic 021
Protech 010, 009
ProVision 021
Pye 010
Quasar 021
Quelle 010
Radialva 010, 003, 009, 007
14. Appendix
GB105
User’s Manual
Radiola 010
Radionette 003, 102
RadioShack 003, 001
Radix 003
Randex 003
RCA 024, 007, 004, 020
Realistic 003, 001, 011, 007
Reoc 028
RFT 009
Roadstar 010, 021, 003, 009, 020, 068
Royal 009
Saba 021, 024, 025
Saisho 028
Salora 011, 005, 012
Samsung 006, 030, 020, 068
Sanky 007
Sansei 007
Sansui 001, 009, 008, 012
Sanyo 011, 008, 007, 020
Saville 021, 029, 020
SBR 010
ScanSonic 020
Schaub Lorenz 028, 001, 011, 023, 012
Schneider 010, 021, 003, 028, 001, 051, 009,
029, 004, 020, 102
Scott 005, 044
Sears 003, 001, 011, 004
Seaway 021
SEG 010, 021, 050, 051, 009, 020, 044
SEI 010
Sei-Sinudyne 010
Seleco 003
Semp 006
Sentra 009
Setron 009
Sharp 007, 040, 102
Shintom 009, 011
Shivaki 003
Shogun 020
Siemens 010, 003, 024, 011
Siera 010
Silva 003
Silva Schneider 102
Silver 021
SilverCrest 051
Singer 009, 006
Sinudyne 010, 029
Smaragd 028
Sonneclair 009
Sonolor 007
Sontec 021, 003
Sony 001, 002, 012, 095, 112
Soundwave 003, 028
Ssangyong 009
Standard 021
Stern 021
Sunkai 021, 028
Sunstar 011
Suntronic 011
Sunwood 009
Supra 003
Sylvania 010, 001, 005
Symphonic 001, 044
Tandberg 021
Tandy 001, 011
Tashiko 010, 003, 001, 007, 020
Tatung 010, 028, 001, 029, 007, 005
Tchibo 028
TCM 028
Teac 003, 001, 051
Tec 009
Tech Line 009
Technics 010, 019
TechniSat 028
Technosonic 029
Teknika 003, 001
Telefunken 021, 024, 025
Telerent 019
Teletech 021, 001, 009
Tenosal 009
Tensai 021, 003, 001, 009
Tevion 028, 051
Texe t 021
14. Appendix
GB106
User’s Manual
Thomas 001
Thomson 021, 024, 008, 025
Thorn 003, 011
TMK 020
Tok ai 003, 009, 011
Topline 028
Toshiba 010, 029, 006, 005, 030, 068
Totevision 003, 020
Towada 009
Tradex 010
Uher 020
Ultravox 021
Unitech 020
United 028, 068
Universum 010, 003, 028, 001, 011, 012, 020,
102
Vector 006
Victor 008
Video Concepts 006
Video Technic 001
Videomagic 003
Videosonic 020
Villain 001
Wards 010, 001, 009, 006, 007, 004, 020
Watson 010, 051, 029
Weltblick 003
Wharfedale 044
White Westinghouse 021, 009
World 028
XR-1000 001, 009
Yamishi 021, 009
Yo k a n 009
Yo k o 003, 009, 020
Zenith 050, 001
ZX 028, 029
TV/VCR Combo
Aiwa 001, 029, 068, 102
Alba 029
Amstrad 001
Beko 011
Bestar 021
Blue Sky 021, 029, 068
Bush 029, 068
Citizen 021
Colt 009
Daewoo 021, 050
Dantax 029, 068
Emerson 021, 050
Ferguson 021, 001, 025, 068
Fidelity 001
Firstline 021
Funai 001
GE 007, 020
GoldStar 003, 031
Goodmans 021, 050, 029, 068
Grandin 021, 068
Grundig 010, 029, 068
Hanimex 029
Harley Davidson 001
Hinari 029
Hitachi 001
Hypson 003
Internal 021, 050
JBL 021
JMB 029
Kneissel 021, 029
LG 003, 031
Lloyd’s 001
Magnasonic 021, 044
Magnavox 010, 001
Magnin 020
Matsui 029, 068
Medion 029
Memorex 003
MGA 020
Mitsubishi 010, 007
Orion 029, 068
Pace 029
Paci c 068
Penney 003, 020
Philips 010
Portland 050
14. Appendix
GB107
User’s Manual
5. Audio & AUX Code List
Brand Code
Ampli er
Acoustic Solutions 078, 082, 084, 094
Cambridge Audio 106
Curtis Mathes 014
Denon 012
Durabrand 089, 090
Goodmans 093
Hitachi 089
JBL 042
Logitech 074
Magnat 042
Magnum 094
Mustek 093
Optimus 014, 029
Paci c 094
Pioneer 014, 029
RCA 014
Sven 090
Tevion 094
Trice 090
upXus 078
Vieta 042
Yamaha 016, 030
Accessory
Apple 038
Sony 008
Yamaha 121, 122
Receiver
Acoustic Solutions 087
AEG 071, 072
AFK 071
Aiwa 005, 073
Akai 004, 021, 072, 087
Alba 087, 088
All-Tel 072
Amstrad 024, 072
Anam 021
Arcam 044
ASCOMTEC 071
Radiola 010
RCA 007, 020
Saba 024
Samsung 030, 020, 068
Sansui 001
Sanyo 020
Saville 029
Schneider 010, 001
Sears 003, 001
SEG 050
Sharp 007
Siemens 010
Sinudyne 029
Sony 001, 002, 112
Sylvania 010
Symphonic 001
Tatung 029
Teac 001
Technics 010
Technosonic 029
Telefunken 021
Thomas 001
Thomson 021, 025
Toshiba 029, 030, 068
United 068
White Westinghouse 021
Zenith 011
14. Appendix
GB108
User’s Manual
Audiolab 043
Audiosonic 071
Audiotronic 043
Bang & Olufsen 028
Basic Line 088
Belson 071
Binatone 071
Blue Sky 072, 087
Bose 046, 099
Bush 027
Cambridge Audio 080, 101
Cat 071
CCE 065
Centrum 045, 071
Clatronic 027, 071
Cosmotron 027
Daewoo 076
Dantax 018, 072
Denon 067, 025, 036, 075
Denver 071
DiK 027
Dual 045, 072
eBench 024, 027
Elta 024, 027, 072
EuroLine 098
Fine Arts 043
Firstline 027
Garrard 013, 018
Genexxa 010
Global Sphere 098
Goodmans 021, 024, 027, 071, 072
Grundig 043, 013, 027, 035, 087
Grunkel 024, 072
Hanseatic 072
Harman/Kardon 043, 056, 003, 011, 057, 060
Harwood 024
HCM 072
HE 071
Hitachi 088
Hitech 024
Hiteker 071
Home Tech Industries 071
Hyundai 087
Inkel 020
Intersound 024
JBL 056, 057
JVC 001, 019, 068
Kenwood 033, 061, 091, 010
Kioto 027
Kompernass 027
KXD 071
LG 054, 086, 125
Lifetec 027
LXI 024
Magnat 071
Magnavox 043, 035
Marantz 043, 049, 031, 035, 053
Matsui 024, 027
MBO 065
Medion 027, 087
MEI 072
Metz 088
Micromega 043
Microstar 027
MTlogic 087
Musicmagic 035
Mustek 065
Mx Onda 024, 027
Myryad 043
NAD 015, 021
Nexius 072
Nikkai 071
Nikkei 024
Norcent 071
NTDE Geniesom 024
Onkyo 006, 063, 114
Optimus 032, 010, 024
Orient Power 024
Orion 018
Palladium 027, 045, 054, 072, 086
Panasonic 109, 085, 058, 059, 062, 110, 111,
113, 128
Paramount Pictures 045
14. Appendix
GB109
User’s Manual
PCCW 128
Philips 043, 049, 031, 035, 048, 053, 117
Phonotrend 020
Pioneer 052, 032, 010, 039, 081, 097
PJ 071
Polk Audio 053
Prima Electronic 027
Proline 027, 072
ProVision 071
QONIX 072, 087
Radionette 054, 100
Recco 027
Redstar 071
Revox 007, 010, 035
Roadstar 027
Rotel 026
Samsung 013, 055, 119, 123, 083
Sansui 021, 035, 098
Sanyo 024
Schneider 003, 024, 045, 072
Scott 071
SEG 088
Sharp 010, 022, 070, 100
Sherwood 020, 022
Siemens 021
Silva Schneider 027, 072, 086
SilverCrest 087
Sony 040, 034, 047, 103, 107, 037, 066,
077, 079, 096, 108, 116, 118, 124
Soundwave 021
Stereophonics 032
Sumida 024
Sun re 061
T+A 050, 105
TAG McLaren 043
Tandberg 088
Targa 054
TCM 027
Teac 018, 021
Technics 109, 085, 058, 059, 011, 110
Techwood 088
Tedelex 098
Tevion 071
Thorens 043
Thorn 024
Tok ai 072
Toshiba 092
United 072, 098
Universum 013, 021, 024, 027, 045, 072, 076,
095
Venturer 027 ,072
Vestel 088
Victor 001
Waitec 065
Watson 027
Wellfund 024
Welltech 027
Wharfedale 072
Xenius 072
Yamaha 009, 002, 010, 017, 023, 041, 051,
064, 069, 112, 115, 120
Yukai 065
Zenith 024
MDB1.3
14. Appendix
GB110
User’s Manual
14.8 OPEN SOURCE SOFTWARE NOTICE
HUMAX products use certain open source operating system software distributed pursuant to GNU
GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL LICENSE Version 2.1 each as de ned and
published by the Free Software Foundation, Inc.
The following GPL and LGPL software source codes used in this product can be provided and this o er
is valid for up to three years from the date of original download of the software or purchase of product
containing such software. Please contact us at gnu@humaxdigital.com.
GPL Software
linux
busybox
e2fsprogs
This package, the EXT2  lesystem utilities, are made available under the GNU Public License version
2, with the exception of the lib/ext2fs and lib/e2p libraries, which are made available under the GNU
Library General Public License Version 2, the lib/uuid library which is made available under a BSD-style
license and the lib/et and lib/ss libraries which are made available under an MIT-style license.
LGPL Software
uClibc
FreeType License (FTL) Software
freetype
Portions of this software are copyright © <2007> The FreeType Project (www.freetype.org).
All rights reserved.
14. Appendix
GB111
User’s Manual
Use, modi cation and redistribution of the Open Source Software is governed by the terms and conditions of the applicable Open
Source License. The GNU General Public License (GPL) v2 is shown below.
The GNU General Public License (GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to
guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most
of the Free Software Foundations software and to any other program whose authors commit to using it. (Some other Free Software Foundation software
is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change
the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must
make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) o er you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the
software is modi ed by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems
introduced by others will not re ect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually
obtain patent licenses, in e ect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s
free use or not licensed at all.
The precise terms and conditions for copying, distribution and modi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the
terms of this General Public License. The “Program, below, refers to any such program or work, and a “work based on the Program means either
the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with
modi cations and/or translated into another language. (Hereinafter, translation is included without limitation in the term modi cation”.) Each
licensee is addressed as “you”.
Activities other than copying, distribution and modi cation are not covered by this License; they are outside its scope. The act of running the
Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of
having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License
and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option o er warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such
modi cations or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modi ed  les to carry prominent notices stating that you changed the  les and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at
no charge to all third parties under the terms of this License.
c) If the modi ed program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to
print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that
users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modi ed work as a whole. If identi able sections of that work are not derived from the Program, and can be
reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when
you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the
14. Appendix
GB112
User’s Manual
distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right
to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a
storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1
and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
b) Accompany it with a written o er, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution,
a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
c) Accompany it with the information you received as to the o er to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an o er, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modi cations to it. For an executable work, complete source code
means all the source code for all modules it contains, plus any associated interface de nition les, plus the scripts used to control compilation and
installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in
either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
If distribution of executable or object code is made by o ering access to copy from a designated place, then o ering equivalent access to copy the
source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along
with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy,
modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have
received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the
Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,
distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor
to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are
imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from
the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free
redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and
the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright
holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that
distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body
of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may di er in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program speci es a version number of this License which applies to it and “any later
version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software
14. Appendix
GB113
User’s Manual
Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are di erent, write to the author to ask
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software
which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source  le to most e ectively convey the exclusion of
warranty; and each  le should have at least the copyright” line and a pointer to where the full notice is found.
One line to give the program’s name and a brief idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is
free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course, the commands you use
may be called something other than `show w’ and `show c’; they could even be mouse-clicks or menu items-whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer” for the program, if necessary. Here
is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision (which makes passes at compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public
License instead of this License.
GNU Lesser General Public License (LGPL)
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and
distribute verbatim copies of this license document, but changing it is not allowed.
[This is the  rst released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number
2.1.]
14. Appendix
GB114
User’s Manual
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended
to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software
Foundation and other authors who decide to use it. You can use it too, but we suggest you  rst think carefully about whether this license or the ordinary
General Public License is the better strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can
change the software and use pieces of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These
restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make
sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object  les to the recipients, so
that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their
rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we o er you this license, which gives you legal permission to copy,
distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modi ed by someone else
and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be a ected by
problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot e ectively restrict the
users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the
library must be consistent with the full freedom of use speci ed in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License,
applies to certain designated libraries, and is quite di erent from the ordinary General Public License. We use this license for certain libraries in order to
permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work,
a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination  ts its criteria of
freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
We call this license the “Lesser General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It
also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the
ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto
standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely
used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For
example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its
variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users freedom, it does ensure that the user of a program that is linked with the Library
has the freedom and the wherewithal to run that program using a modi ed version of the Library.
The precise terms and conditions for copying, distribution and modi cation follow. Pay close attention to the di erence between a “work based on the
library and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order
to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized
party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as
“you.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use
some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means
either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or
with modi cations and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term
“modi cation”.)
14. Appendix
GB115
User’s Manual
“Source code for a work means the preferred form of the work for making modi cations to it. For a library, complete source code means all the
source code for all modules it contains, plus any associated interface de nition  les, plus the scripts used to control compilation and installation of
the library.
Activities other than copying, distribution and modi cation are not covered by this License; they are outside its scope. The act of running a
program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library
(independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that
uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option o er warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such
modi cations or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modi ed work must itself be a software library.
b) You must cause the  les modi ed to carry prominent notices stating that you changed the  les and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modi ed Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument
passed when the facility is invoked, then you must make a good faith e ort to ensure that, in the event an application does not supply such function or table, the facility
still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-de ned independent of the application. Therefore,
Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the
square root function must still compute square roots.)
These requirements apply to the modi ed work as a whole. If identi able sections of that work are not derived from the Library, and can be
reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when
you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the
distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right
to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a
storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must
alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a
newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not
make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies
and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by o ering access to copy from a designated place, then o ering equivalent access to copy the source code
from the same place satis es the requirement to distribute the source code, even though third parties are not compelled to copy the source along
with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it,
is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this
License.
However, linking a “work that uses the Library with the Library creates an executable that is a derivative of the Library (because it contains portions
of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of
such executables.
When a “work that uses the Library” uses material from a header  le that is part of the Library, the object code for the work may be a derivative work
of the Library even though the source code is not. Whether this is true is especially signi cant if the work can be linked without the Library, or if the
work is itself a library. The threshold for this to be true is not precisely de ned by law.
14. Appendix
GB116
User’s Manual
If such an object  le uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or
less in length), then the use of the object  le is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object
code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables
containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library with the Library to produce a work containing
portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modi cation of the work for the
customer’s own use and reverse engineering for debugging such modi cations.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License.
You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library
among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which
must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the
Library, as object code and/or source code, so that the user can modify the Library and then relink to produce a modi ed executable containing the modi ed Library.
(It is understood that the user who changes the contents of de nitions  les in the Library will not necessarily be able to recompile the application to use the modi ed
de nitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the
user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modi ed version of the library, if the user installs
one, as long as the modi ed version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written o er, valid for at least three years, to give the same user the materials speci ed in Subsection 6a, above, for a charge no more than
the cost of performing this distribution.
d) If distribution of the work is made by o ering access to copy from a designated place, o er equivalent access to copy the above speci ed materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library must include any data and utility programs needed for reproducing the
executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either
source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating
system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by
this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library
facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the
terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to  nd the accompanying uncombined
form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full
compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute
the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing
the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,
distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to
copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are
imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from
the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free
redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and
the section as a whole is intended to apply in other circumstances.
14. Appendix
GB117
User’s Manual
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright
holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that
distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body
of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions
will be similar in spirit to the present version, but may di er in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library speci es a version number of this License which applies to it and “any later
version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software
Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the
author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software
and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can
redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public
License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source  le to most e ectively convey the
exclusion of warranty; and each  le should have at least the copyright” line and a pointer to where the full notice is found.
one line to give the library’s name and an idea of what it does.> Copyright (C) year name of author
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the
Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer” for the library, if necessary. Here is
a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob (a library for tweaking knobs) written by James Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
www.humaxdigital.com
20000-00257
*20000-00257*
MANUAL/FOXSATHDR/400GB
102

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Humax FOXSAT-HDR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Humax FOXSAT-HDR in de taal/talen: Engels als bijlage per email.

De handleiding is 3,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info