740192

Huawei WATCH GT 2 Pro - VID-B19 Handleiding

1
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
Contents
Getting started
Wearing the watch
1
Adjusting and Replacing the watch strap
1
Pairing your watch with your phone
5
Powering on/o and restarting the watch
6
Charging your watch
7
Buttons and gestures
8
Customising the Down button
10
Adjusting screen brightness
10
Setting the vibration strength on the watch
10
Setting time and language
10
Enabling frequently used features
11
Unlocking your phone using your watch
11
Enabling Do not disturb mode
11
Connecting earbuds
12
Viewing the Bluetooth name and MAC address
12
Viewing version information
12
Viewing Device SN
12
Updating Huawei’s watch and the Huawei Health app
12
Restoring the watch to its factory settings
13
Workout monitoring
Starting a workout
14
Workout status
15
Tracking daily activities
16
Viewing the duration of moderate to high intensity activity
16
Recording workout routes
17
Syncing and sharing your tness and health data
17
Health management
Monitoring your heart rate
18
Tracking sleep
21
Testing stress levels
21
Activity reminder
22
Enabling HUAWEI TruSleep™
23
Convenient life
Getting notications and deleting messages
24
Setting favorite contacts (using a watch to make/receive a
call)
26
Answering or rejecting incoming calls
26
i
Checking your call log
27
Playing music
27
Using Stopwatch or Timer
28
Setting an alarm
29
Using Flashlight
30
Using the Barometer app
30
Using Compass
31
Weather reports
31
Finding your phone using your watch
31
More guidance
Changing watch faces
33
Setting Gallery watch faces
33
Installing, replacing, and deleting watch faces
35
Setting a standby watch face
36
Setting up dual time zones
36
Contents
ii
Getting started
Wearing the watch
Attach the heart rate monitoring area of your watch on the top of your wrist, as shown in the
following gure. To ensure the accuracy of heart rate measurement, wear your watch
properly and do not wear it above the joint in your wrist. Do not wear it too loosely or too
tightly but make sure that your watch is attached securely on your wrist.
• Your watch uses non-toxic materials that have passed strict skin allergy tests. Please
rest reassured when wearing wear it. If you experience skin discomfort when wearing
the watch, take it o and consult a doctor.
• Wear your watch correctly for greater comfort.
• You can wear your watch on either wrist.
Adjusting and Replacing the watch strap
Adjusting the strap
For watches with non-metallic straps and T-shaped buckles, you can adjust the strap to a
comfortable t depending on the circumference of your wrist.
If the strap is made of metallic materials, adjust it by performing the following:
Adjusting metal link straps
1. Use the screwdriver that comes with the watch to remove the screws from the links you
want to remove.
1
2. Remove a link from both sides of the clasp to make sure the watch face is still centred.
3. Re-assemble the strap.
4. Put the screws back in.
Getting started
2
Adjusting metal mesh straps
1. Undo the clasp.
2. Pull the bottom plate upward so it is at a 90° angle with the strap.
3. Slide the clasp to adjust the length.
Getting started
3
4. Align the plate with the grooves and clamp it back down. Finish by fastening the clasp.
Removing and installing the strap
To remove a non-metallic strap, unlock the fastener, remove your current strap, and then
release the spring pin, as shown in the following gure. Follow the steps in the reverse order
to install a new strap.
To remove a metal strap, perform the steps shown in the following gure. Follow the steps in
the reverse order to install a new strap.
Getting started
4
Pairing your watch with your phone
If you have just taken the watch out of the box, press the Up button and hold until your
watch vibrates and displays a startup screen. The watch is ready to be paired via Bluetooth by
default.
• For Android users:
1 Download and install the Huawei Health app from an app store. If you have already
installed it, make sure that it is up-to-date.
2 Open the Huawei Health app and follow the onscreen instructions to grant required
permissions to the app. Go to Devices > Add > Smart Watch, and touch the device you
wish to pair.
3 Touch PAIR and the app will automatically search for nearby available Bluetooth
devices. Once your watch is found, touch its name to start pairing.
4 When a pairing request is displayed on the watch screen, touch
to pair your
watch and phone. Conrm the pairing on your phone as well.
• For iOS users:
1 Download and install the Huawei Health app from App Store. If you have already
installed it, make sure that it is up-to-date.
2 Open the Huawei Health app, go to Devices > + > Smart Watch, and touch the device
you wish to pair.
3 Touch PAIR and the app will automatically search for nearby available Bluetooth
devices. Once your watch is found, touch its name to start pairing.
4 When a pairing request appears on your watch screen, touch to pair your watch
and phone.
HUAWEI WATCH GT2 (46 mm) / HUAWEI WATCH GT 2 Pro follow these steps to pair:
1 Log in to the App Store on your phone and search Huawei Health. Download and install
the app, and make sure it is fully updated.
Getting started
5
2 On the phone go to Settings > Bluetooth. The watch should show up automatically,
touch your device, then touch
to nish pairing.
3 Open the Health app and go to the settings screen, touch + in the upper right corner
and select Smart watches. Select your device's model.
4 Touch PAIR and the app will automatically search for nearby available Bluetooth devices.
Once your watch is found, touch its name to start pairing.
5 When a pairing request is displayed on the watch screen, touch
to pair your
watch and phone. Conrm the pairing on your phone as well.
• When pairing for the rst time, you can use your phone to scan the QR code on the
watch screen to download the Huawei Health app.
• If your watch does not respond after you touch to conrm the pairing request,
press the Down button and hold to unlock your watch, and initiate a pairing procedure
again.
• Your watch will display an icon on the screen to inform you that pairing was successful.
It will then receive information (such as the date and time) from your phone.
• If the paring failed, your watch screen will display an icon to inform you that pairing
was unsuccessful. It will then return to the startup screen.
• A watch can be connected with only one phone at any given time, and vice versa. If
you want to pair your watch with another phone, disconnect your watch from the
current phone using the Huawei Health app, and then pair your watch with another
phone using the Huawei Health app.
Powering on/o and restarting the watch
Powering on the watch
• When the watch is powered
o, press and hold the Up button to power on the watch.
• When the watch is powered o, the watch will automatically power on if you charge it.
If you power on the watch when the battery level is critically low, the watch will remind
you to charge it and the watch's screen will turn o after 2 seconds. You will be unable to
power on the watch until you charge it.
Powering o the watch
• When the watch is powered on, press and hold the Up button, and then touch Power o.
• When the watch is powered on, press the Up button while on the home screen, swipe up or
down until you nd Settings, touch it, go to System > Power o, and then touch √ to
conrm.
Getting started
6
• If the battery level is critically low, the watch will vibrate and then automatically power o.
Restarting the watch
• When the watch is powered on, press and hold the Up button, and then touch Restart.
• When the watch is powered on, from the home screen press the Up button, swipe until you
nd Settings, touch it, go to System > Restart, and then touch √ to conrm your choice.
Force restarting the watch
• Press and hold the Up button for at least 16 seconds to force restart the watch.
Charging your watch
Charging
1 Connect the USB Type-C port and power adapter and then plug in the power adapter.
2 Rest your watch on top of the charging cradle, ensuring that the contacts on your watch
and the cradle are aligned. Wait until the charging icon appears on your watch screen.
3 When your watch is fully charged, 100% will be displayed on the watch screen and the
charging will stop automatically. If the battery level is below 100% and the charger is still
connected to the phone, the charging will start automatically.
• Use the dedicated charging cable, charging cradle, rated output voltage of 5 V, and
rated output current of 1 A or higher to charge your watch.
• It is recommended that you lift the charging cradle to attach it to your watch. Ensure
that the side of your watch with buttons is aligned with the charging port of the cradle.
After the cradle and watch are connected properly, check to see if the charging icon is
displayed. If you cannot see the charging icon, you may need to slightly adjust the
position of the cradle until contact is established and the charging icon appears.
• Your watch will automatically power o when its battery level is too low. your watch
will automatically power on.
Charging time
Your watch will be fully charged within two hours. When the charging indicator displays
100%, the watch is fully charged. Disconnect your watch from the power adapter once it is
fully charged.
Getting started
7
• Charge your watch in a dry and well-ventilated environment.
• Before charging, make sure that the charging port and metal parts are clean and dry to
prevent short circuits or any other risks.
• Before charging, make sure the charging port is dry. Wipe o any water or sweat
stains.
• It is recommended that the ambient temperature is between 0 and 45°C.
• To protect the battery, the charging current will be reduced if the ambient temperature
is low, which will prolong the charging time without
aecting the battery lifespan.
Checking the Battery Level
Use one of the following three methods to check the battery level:
Method 1: When your watch is connected to the charger, you can check the battery level on
the charging screen that is displayed automatically. Press the Up button to exit the charging
screen.
Method 2: Swipe the home screen from top to bottom and then check the battery level in
the drop-down menu.
Method 3: Check the battery level on the device details screen in the Huawei Health app.
Buttons and gestures
The watch is equipped with a colour touchscreen that is highly responsive to your touches
and can be swiped in dierent directions.
Up button
Operation Function Remarks
Press • Wake watch screen when
the screen is o.
• Access the app list screen
from the home screen.
• Return to the home screen.
There are certain exceptional
scenarios such as for calls and
workouts.
Press and hold • Power on your watch when
the watch is o.
• Access the restart/power o
screen when the watch is
on.
Getting started
8
Down button
Operation Function Remarks
Press Open the workout app.
Access the customised feature
you set.
There are certain exceptional
scenarios such as for calls and
workouts.
Button functions during a workout
Operation Function
Press the Up button Lock/unlock, mute, or end workout
Press the Down button Switch screen.
Press and hold the Up button Finish the workout.
Swipe up or down on the screen Switch screen.
Touch the screen and hold Show a dierent data type.
Gestures
Operation Function
Touch Choose and conrm.
Touch and hold on the home screen Change the watch face.
Swipe up on the home screen View notications.
Swipe down on the home screen View the shortcut menu.
Swipe left or right View your heart rate data, workout data,
weather information.
Swipe right Return to the previous screen.
Wake the screen
• Press the Up button.
• Raise or rotate your wrist inwards.
• Swipe down on the home screen to open the shortcut menu. Enable Show Time and the
screen will stay on 5 minutes.
You can enable the Raise wrist to wake screen function in the Huawei Health app by
going to the details screen of your watch.
Turn o the screen
• Lower or rotate your wrist outwards.
• The screen will turn
o automatically 5 seconds after the watch's screen is turned on if no
operation is performed within this period of time. If any operation is performed, the screen
will turn o 15 seconds after it is turned on.
Getting started
9
From the home screen press the Up button and go to Settings > Display > Advanced
to adjust the duration it takes for your watch to go to sleep and turn o the screen. The
duration is set to Auto by default.
Customising the Down button
1 From the home screen press the Up button and go to Settings > Down button.
2 Touch an app from the list. This app will be opened when you press the Down button.
By default, pressing the Down button will open the Workout app.
Adjusting screen brightness
From the home screen press the Up button and go to Settings > Display > Brightness to
adjust the screen brightness. Brightness is set to Auto by default, which automatically adjusts
screen brightness based on your environment. Level 5 is the brightest setting and Level 1 is
the dimmest setting.
Setting the vibration strength on the watch
1. From the home screen press the Up button, then go to Settings > Strength.
2. Swipe up or down on the screen and select Strong, Soft, or None. Touch OK. Your watch
will then automatically return to the previous screen and vibrate with the strength that you
set.
Setting time and language
You do not need to set the time and language on your watch. When the watch is connected
with your phone, the time and language settings on your phone will be automatically synced
to your watch.
If you change the language, time, or time format on your phone, the changes will be
automatically synced to your watch when the watch and phone are connected.
• For iOS users: Open your phone, go to Settings > General > Language & Region, set
the language and region, and then connect the watch with your phone to sync the
settings.
• For Android users: Taking EMUI 9.0 as an example, open your phone, choose Settings
> System > Language & input, set the language, and then connect the watch with
your phone to sync the settings.
Getting started
10
Enabling frequently used features
After connecting your watch to your phone through the Huawei Health app, you can enable
features for your watch in the app. Frequently used features include:
• HUAWEI TruSleep
TM
• Activity reminder
• Continuous heart rate monitoring
• Automatic stress test
•
Notications
• Weather reports
• Bluetooth disconnection reminder
• Raise wrist to wake screen
Unlocking your phone using your watch
Whether this feature is supported depends on your phone's
specications.
To enable this feature, perform the following: (The following takes a phone running EMUI 9.0
as an example.)
1 Ensure that your phone and watch have been paired.
2 On your phone, go to Settings > Security & privacy > Lock screen password > Smart
lock. Set your lock screen password and add your watch as a trusted device.
3 You can now access your phone just by swiping on the phone screen and without having
to enter a password.
This feature will only work when your phone and watch are connected.
Enabling Do not disturb mode
To enable Do not disturb mode, swipe down on your watch's home screen, touch No Disturb,
and then touch √ to conrm.
If your watch enters Do not disturb mode:
1 The watch will not vibrate for incoming calls, but you can still answer or reject incoming
calls with the watch.
2 Messages and notications will not be displayed on the watch, and the Raise wrist to
wake screen feature will be disabled.
If your watch does not support the calling feature, you will be unable to answer or
reject incoming calls with the watch.
Getting started
11
Connecting earbuds
1 From the home screen press the Up button and go to Settings > Earbuds.
2 Your watch will search automatically for the Bluetooth earbuds list for pairing. Select the
name of your earbuds and follow the onscreen instructions to complete the pairing.
• If Bluetooth earbuds are connected via the watch and you answer a call from the
watch, the audio will play from the watch's speaker. Audio for calls cannot go
through the earbuds yet.
• If you would like to use your Bluetooth earbuds for calls, connect the earbuds to
your phone and answer calls from your phone too.
Viewing the Bluetooth name and MAC address
To view the Bluetooth name and MAC address of your watch, use any of the following
methods:
Method 1: On the home screen of your watch, press the Up button and go to Settings >
About. The Device Name is your watch's Bluetooth name. The 12 alphanumeric characters
under MAC are your watch's MAC address.
Method 2: Your watch's Bluetooth name and MAC address are laser engraved on the back of
the watch. The 12 alphanumeric characters next to MAC: are your watch's MAC address.
Method 3: Perform the following in the Huawei Health app:
Open the Huawei Health app, touch Devices, and the name of your watch will be displayed.
Touch its name to access the details screen. Locate Restore factory settings, and the 12
alphanumeric characters next to it are your watch's MAC address.
Viewing version information
From the home screen press the Up button, swipe until you nd Settings, touch it, then
touch About, and your watch's version information will be displayed.
Viewing Device SN
From the home screen press the Up button, swipe until you nd Settings, touch it, then
touch About, and your watch's SN (serial number) will be displayed under SN.
Updating Huawei’s watch and the Huawei Health
app
How to update your Huawei watch
Getting started
12
Method 1:
Connect your Huawei watch to your phone using the Huawei Health app. To do this, open
the app, touch Devices > your device’s name > Firmware update, then follow the onscreen
instructions to update your watch should there be any new updates.
Method 2:
• For Android users: Go to the Huawei Health app, touch Devices > your device’s name >
enable Auto-download update packages over Wi-Fi. If there are any new updates, the
watch will display update reminders. Follow the onscreen instructions to update your
watch.
• For iOS users: Go to the Huawei Health app, touch the prole picture in the upper-left
corner on the home screen > Settings, then enable Auto-download update packages over
Wi-Fi. If there are any new updates, the watch will display update reminders. Follow the
onscreen instructions to update your watch.
How to update the Huawei Health app
For Android users: Open the AppGallery > search for Huawei Health > click onUpdate if
available.
For iOS users: Open the App Store > search for Huawei Health > click onUpdate if available.
During an update, the watch will automatically disconnect from your phone.
The update button will only appear when new updates are available.
Restoring the watch to its factory settings
Method 1: From the home screen press the Up button, swipe until you nd Settings, touch it,
go to System > Reset, and then touch √ to conrm. As all the data on your watch will be
removed when you restore the watch to its factory settings, please exercise caution before
conrming.
Method 2: Open the Huawei Health app, touch Devices, touch the device name, and then
touch Restore factory settings.
Getting started
13
Workout monitoring
Starting a workout
Your watch supports multiple workout modes. Choose a workout mode and start exercising.
Running Courses
The watch has been preinstalled with a series of running courses, from entry-level to
advanced, that provide personalized and real-time guidance. You can choose dierent courses
on your watch.
1 From the home screen press the Up button, swipe until you
nd Workout, touch it,
choose Running courses, choose a course that you want to use, and then start running as
prompted by your watch.
2 During the workout, press the Up button to pause or end the running course, lock the
screen, or adjust the volume for prompts during the workout. Press the Down button to
switch between screens and view dierent workout data.
3 After a workout, touch Workout records to view detailed workout records, including
training eects, overall performance, speed, steps, total height, heart rate, heart rate zone,
cadence, pace, and VO
2
max.
To view detailed workout data, you can also open the Huawei Health app and touch
Exercise records.
Starting a workout
Starting a workout using your watch:
1 From the home screen press the Up button, swipe until you nd Workout, and then touch
it.
2 Swipe up or down until you
nd your workout type. Before a workout, you can touch the
Settings icon located next to each workout mode to congure target, reminders, and
display settings.
There is no Settings icon located next to Triathlon mode.
In Triathlon mode, press the Down button to move to the next form.
Skiing, snowboarding do not support setting workout goals, however, they and cross-
country skiing do support SpO
2
measurement during workouts.
3 Touch the Start icon to start a workout. During a workout, touch and hold the workout
data screen until the watch vibrates, touch any workout data (such as heart rate, speed,
distance, and time), and then choose what to display on the screen in real time.
4 During the workout, press the Up button to pause or end the running course, lock the
screen, or adjust the volume for prompts during the workout. Press the Down button to
switch between screens and view dierent workout data. (Take Outdoor Run mode as an
example. During the workout, you can view a range of data displayed next to Heart rate,
Pace, Distance, Time, Steps, Cadence, Total calories, and Total climbing. Dierent workout
modes display dierent types of data.)
14
5 After a workout, press the Up button and touch the stop icon, or hold the Up button to
end a workout session. Touch Workout records to view detailed workout records.
If you have selected a workout mode that includes swimming, the watch screen will be
locked after you start the workout session. Press and hold the Up button to end the
workout.
After the swimming session is complete, the watch will vibrate occasionally while
displaying a message indicating that the watch is draining water.
Starting a workout using the Huawei Health app:
To start a workout using the Huawei Health app, you need to bring your phone and watch
together to ensure that they are connected properly.
1 Open the Huawei Health app, touch Exercise, choose a workout mode, and then touch
the Start icon to start a workout.
2 Once you have started a workout, your watch will sync and display your workout heart
rate, step count, speed, and time.
3 During a workout, the Huawei Health app displays workout time and other data.
• If the workout distance or time is too short, the results will not be recorded.
• To avoid draining your battery, make sure you hold the stop icon after a workout to
end it.
• Connect the watch to the phone using the Huawei Health app and start a workout in
the app. When you start it from the app, the data between the watch and the app can
sync.
• After a workout, open the Huawei Health app, touch Exercise records to view detailed
workout data. Touch and hold a record to delete it from the app. This record will still
be available on your watch. Up to 10 workout records can be saved on your watch. If
you have more than 10 records, the oldest ones will be overwritten by new ones.
Records on the watch cannot be deleted manually. You can reset your watch to its
factory settings to clear your workout records. However, this will also clear any other
data on your watch as well.
Workout status
The Workout status app on your watch can demonstrate your tness status variation and
your training load from the last seven days. You can review and modify your current workout
plan with the help of this app. The app can also demonstrate your recovery time, high
eciency levels, peak status, training interruptions, and low eciency levels. On the Training
load screen, you can view your training load from the last seven days. Training load is
classied as High, Low, or Optimal, and you can determine your level based on your tness
status.
The Workout status app mainly tracks your training load and VO
2
max variations.
Workout monitoring
15
The watch collects your training load from workout modes which track your heart rate, such
as running, walking, and cycling, and collects your VO
2
max value when you start an outdoor
running workout. The watch cannot display your workout status if it has not collected any
VO
2
max values. VO
2
max variation will be displayed only if you use Outdoor Run mode at
least once a week (at least 2.4 kilometres within 20 minutes for each workout), and the
watch collects at least two VO
2
max values with an interval of more than a week.
From the home screen press the Up button, swipe until you
nd Workout status, touch it,
and then swipe up on the screen to view your workout status.
Fitness status (VO
2
max) variation is an important indicator of your workout status. Your
watch will display your VO
2
max variation and your workout status only if you use
Outdoor Run mode at least once a week, and the watch collects at least two VO
2
max
values with an interval of more than a week.
Tracking daily activities
As your watch comes equipped with a motion sensor, it can track and display your steps,
amount of calories burned, activity intensity, and standing times.
Wear your watch correctly for it to automatically record data relating to calories, distance,
steps, duration of moderate to high intensity activities, and other activities.
You can view activity records by performing the following:
Method 1: Viewing activity records on your watch
From the home screen press the Up button, swipe until you nd Activity records, touch it,
and then you can swipe up or down to view data relating to calories, distance, steps, duration
of moderate to high intensity activities, and other activities.
Method 2: Viewing activity records using the Huawei Health app
Open the Huawei Health app and view activity records on the home screen.
• To view your activity records using the Huawei Health app, ensure that the watch is
connected to your phone.
• Workout data on your watch can be synced to the Huawei Health app, but data
recorded in the app cannot be synced to your watch.
Viewing the duration of moderate to high intensity
activity
Viewing the duration of moderate to high intensity activity
From the home screen press the Up button, swipe until you nd Activity records.
Steps: This ring indicates the proportion of your steps to the target step count.
Workout monitoring
16
Duration of moderate to high intensity activity (unit: minutes): The default goal is 30
minutes.
Active hours: This ring represents how many hours you have been stood up for during
the day.
Android users can also check the duration of moderate to high intensity activity on the
home screen of the Huawei Health app. The data displayed in the Huawei Health app is
collected from both your phone and watch. Therefore, there is nothing to be concerned
about if there is a data discrepancy between the app and your watch.
Recording workout routes
The watch features built-in GPS. Even if disconnected from your phone, the watch can still
record your workout routes when you start Outdoor Run, Outdoor Walk, Outdoor Cycle,
Climb, and other outdoor modes.
Outdoor sports skipping the GPS positioning process will result in abnormal motion track
data. It is recommended that you start the sport after the satellite search and positioning
of the wearable device is successful during outdoor exercise.
Dierent models support dierent outdoor workout modes.
If you cannot view workout routes on your watch, sync the workout data to the Huawei
Health app and view the workout routes and other detailed workout data under Exercise
records in Huawei Health.
Syncing and sharing your tness and health data
You can share your tness data to third-party apps and compare with your friends.
For Android users:
To share your tness data to a third-party app, open the Huawei Health app, go to Me >
Settings > Data sharing and select the platform you want to share to. Follow the onscreen
instructions specic to each platform.
For iOS users:
To share your tness data to a third-party app, open the Huawei Health app, go to Discover
> Third party services and select the platform you want to share to. Follow the onscreen
instructions specic to each platform.
Workout monitoring
17
Health management
Monitoring your heart rate
The watch features an optical heart rate sensor, which can monitor and record your heart
rate all day. To use this feature, you need to enable Continuous heart rate in the Huawei
Health app.
When the watch detects that the user has fallen sleep, it will switch to use the non-visible
light to measure your heart rate, letting you have a good nights sleep.
Heart rate measurement
1 Keep your arm still and wear your watch correctly.
2 From the home screen press the Up button, swipe until you
nd Heart rate. Touch Heart
rate. The watch will then measure your current heart rate.
3 To pause the heart rate measurement, swipe right on your watch screen.
It usually takes approximately 6 to 10 seconds to display the rst measurement value (1
to 2 seconds if Continuous heart rate monitoring is enabled in the Huawei Health app
and MONITORING MODE is set to Real-time), and the data updates every 5 seconds
afterward. A complete measurement takes approximately 45 seconds to complete.
To guarantee a more accurate heart rate measurement, wear the watch correctly and
ensure the strap is fastened. Make sure that your watch is secure on your wrist. Ensure
that the watch body is in direct contact with your skin without any obstructions.
Setting the heart rate zone calculation method
The heart rate interval can be calculated based on the maximum heart rate percentage or
HRR percentage. To set the heart rate interval calculation method, open the Huawei Health
app, go to Me > Settings > Heart rate limit and zones and set Calculation method to
either Maximum heart rate percentage or HRR percentage.
• If you select Maximum heart rate percentage as the calculation method, the heart
rate zone for dierent types of workout activities (Extreme, Anaerobic, Aerobic, Fat-
burning, and Warm-up) is calculated based on your maximum heart rate ("220 – your
age" by default). Heart rate = Maximum heart rate x Maximum heart rate percentage.
• If you select HRR percentage as the calculation method, the heart rate interval for
dierent types of workout activities (Advanced anaerobic, Basic anaerobic, Lactic acid,
Advanced aerobic, and Basic aerobic) is calculated based on your heart rate reserve
(HRmax - HRrest). Heart rate = Heart rate reserve x Heart rate reserve percentage +
Resting heart rate.
• The heart rate zone calculation methods while you are running are not aected by the
settings in the Huawei Health app. For most running courses, HRR percentage is
selected by default.
18
Your watch will display dierent colors when your heart rate reaches corresponding zones
during a workout. The following gure shows how heart rate is displayed during an outdoor
run.
Measuring your heart rate during a workout
1 After you start a workout, swipe on the watch screen to check your real-time heart rate
and heart rate zone.
2 After completing your workout, you can check your average heart rate, maximum heart
rate, and heart rate zone on the workout results screen.
3 You can view graphs that show the changes in heart rate, maximum heart rate, and
average heart rate for each workout under Exercise records in the Huawei Health app.
• Your heart rate will not be displayed if you remove the watch from your wrist during
the workout. However, the watch will continue to search for your heart rate for a while.
The measurement will resume once you wear the watch again.
• Your watch can measure your heart rate when you have connected it to your phone
and started a workout using the Huawei Health app.
Continuous heart rate monitoring
To enable this feature, connect your watch to your phone using the Huawei Health app and
enable Continuous heart rate monitoring in the Huawei Health app. Once this feature is
enabled, your watch can measure your real-time heart rate.
Set the MONITORING MODE to Smart or Real-time.
• Smart mode
1 The heart rate measurement will be performed every 10 minutes for low-intensity
activities (such as when you are not moving).
2 The heart rate measurement will be performed every 10 minutes for moderate-intensity
activities (such as when you are walking).
3 The heart rate measurement will be performed once a second for high-intensity
activities (such as when you are running) and it takes 6 to 10 seconds to display the
rst
heart rate value, though this may vary between individuals).
Health management
19
• Real-time mode: The heart rate measurement will be performed once a second for any type
of activity intensity.
When this feature is enabled, the watch will continuously measure your real-time heart rate.
You can view graphs for your heart rate in the Huawei Health app.
Using Real-time mode will increase the power consumption of your watch while Smart
mode will adjust the heart rate measurement interval based on the intensity of your
activity, thus reducing power consumption.
Resting heart rate measurement
Resting heart rate refers to the heart rate when it is measured in a quiet and relaxed
environment when you are awake. It is a general indicator of cardiovascular health.
The best time to measure your resting heart rate is immediately after you have woken up in
the morning. Your actual resting heart rate may not be displayed or accurately measured if
your heart rate was measured at the wrong time.
To automatically measure your heart rate, enable Continuous heart rate monitoring in the
Huawei Health app.
If "--" is displayed as the resting heart rate reading, it indicates that your watch was unable
to measure your resting heart rate. In this case, ensure that you measure your resting heart
rate in a quiet and relaxed environment when you are awake. It is recommended that you
measure your resting heart rate immediately after you wake up in the morning for the most
accurate result.
If you disable Continuous heart rate monitoring after checking your resting heart rate,
the resting heart rate displayed in the Huawei Health app will remain the same.
Heart rate warning
After you start a workout using your watch, your watch will vibrate to alert you that your
heart rate value has exceeded the upper limit for more than 10 seconds. To view and
congure your heart rate limit, perform the following:
Open the Huawei Health app, go to Me > Settings > Heart rate limit and zones and select
your desired heart rate limit. The following gure shows how to set your heart rate limit:
• The default heart rate limit is 220 - age, which is obtained from the personal
information you enter.
• If you disable voice guidance for individual workouts, you will only be alerted through
vibrations and card prompts.
• Heart rate alerts are only available during active workouts and are not generated
during daily monitoring.
Heart rate alerts
To enable High heart rate alerts for your resting heart rate, open the Huawei Health app,
touch Devices then your device, go to Continuous heart rate monitoring > High heart rate
Health management
20
alert, and set your heart rate upper limit. Then, touch OK. When you are not doing any
exercise, you will receive an alert when your resting heart rate stays above your set limit for
more than 10 minutes.
To enable Low heart rate alerts for your resting heart rate, open the Huawei Health app,
touch Devices then your device, go to Continuous heart rate monitoring > Low heart rate
alert, and set your heart rate upper limit. Then, touch OK. When you are not doing any
exercise, you will receive an alert when your resting heart rate stays below your set limit for
more than 10 minutes.
Tracking sleep
Your watch collects sleep data and identies your sleep status when you wear it while
sleeping. It can automatically detect when you fall asleep and wake up and whether you are
in a light or deep sleep. You can sync and view your sleep data in detail in the Huawei Health
app.
Your watch measures your sleep data from 20:00 to 20:00 on the following day (24 hours in
total). For example, if you sleep for 11 hours from 19:00 to 06:00, your watch will count the
length of time you slept before 20:00 during the rst day as well as the rest of the time that
you were asleep during the second day.
From the home screen press the Up button, swipe until you nd Sleep, then touch it and
swipe up on the screen to view your nighttime sleep duration and nap duration. Your daytime
sleep duration is displayed under Naps.
You are able to view your history sleep data in the Huawei Health app. Open the Huawei
Health app and touch Sleep to view your daily, weekly, monthly, and yearly sleep statistics.
Naps that you take during the day are counted under Naps. If you take a midday nap of
less than 30 minutes or you moved around too much during a midday nap, your watch
may have determined incorrectly that you were awake.
You can enable HUAWEI TruSleep
TM
in the Huawei Health app.
After you enable HUAWEI TruSleep
TM
, your watch will collect your sleep data, detect when
you fall asleep, wake up, and whether you are in a light, deep, or REM sleep, and identify the
times when you wake up and your breathing quality to provide you with a sleep quality
analysis and suggestions to help you understand and improve your sleep quality.
When your watch detects that you are sleeping, it will automatically disable Always-on
screen, message reminders, incoming call notications, Raise wrist to wake screen, and other
features in order to not disturb your sleep.
Testing stress levels
You can use your watch to test your stress level on a one-o or periodic basis.
Health management
21
• To measure your stress level on a one-o basis: Open the Huawei Health app, touch Stress
then Stress test. When using this feature for the rst time, you need to calibrate the stress
value. Follow the onscreen instructions in the Huawei Health app to answer the
questionnaire for a better stress test result.
• To measure your stress level on a periodic basis: Open the Huawei Health app, touch
Devices, then touch your device name, enable Automatic stress test and follow the
onscreen instructions to calibrate the stress value. Make sure that you are wearing your
watch correctly and the watch will periodically test your stress level.
Viewing stress data:
• Viewing stress data on the watch: Press the Up button while on the home screen, swipe up
or down until you nd Stress, and touch it to view the graph indicating your stress change,
including the stress bar chart, your stress level, and your stress interval.
• Viewing stress data in the Huawei Health app: Open the Huawei Health app, touch Stress
to view your latest stress level and your daily, weekly, monthly and yearly stress curve and
corresponding advice. At the same time, you can refer to content under STRESS RELIEF
ASSISTANT to reduce your stress and stay relaxed.
• Stress tests are only available with a HUAWEI WATCH GT 2/HUAWEI WATCH GT 2e
and require an Android phone.
• During the stress test, wear your watch correctly and keep still.
• Your watch will be unable to accurately detect your stress level during a workout or
when you move your wrist too frequently. In this case, your watch will not carry out a
stress test.
• The accuracy of the data may be aected by caeine, nicotine, alcohol, and some
psychotropic medication. In addition, heart disease, asthma, exercise or an incorrect
wearing position will also aect the data.
• The watch is not a medical device and the data is for reference only.
Activity reminder
When Activity reminder is enabled, your band/watch will monitor your activity throughout
the day in increments (set to 1 hour by default). Your band/watch will vibrate and turn on its
screen to remind you if you haven't moved during that time period, so you can keep a good
balance of activity and rest throughout the day.
Disable Activity reminder in the Huawei Health app if you do not want to be disturbed. To do
this, open the Huawei Health app, touch Health monitoring and disable Activity reminder.
• Your band/watch will not vibrate to send you notications while Do Not Disturb is
enabled or you are asleep.
• Your band/watch will only send activity reminders between 8:00–12:00 and 14:00–
22:00.
Health management
22
Enabling HUAWEI TruSleep™
Open the Huawei Health app, touch Devices, then touch your device name, and enable
HUAWEI TruSleep
TM
.
• Enabling HUAWEI TruSleep
TM
may reduce the battery life.
• HUAWEI TruSleep
TM
is disabled by default.
• The HUAWEI TruSleep
TM
tracking will not be aected if your phone powers o while
you are asleep.
• Enabling Do not disturb in the Huawei Health app will not aect the HUAWEI
TruSleep
TM
tracking.
Health management
23
Convenient life
Getting notications and deleting messages
Getting notications
Ensure that the watch is paired with your phone using the Huawei Health app, then perform
the following:
For Android users: Open the Huawei Health app, touch Devices, and then touch your device.
Touch Notications and enable Notications. Turn on the switch for apps for which you
want to receive notications.
For iOS users: Open the Huawei Health app, touch Devices, and then touch your device.
Touch Notications and enable Notications. Turn on the switch for apps for which you
want to receive notications.
Your watch will vibrate to notify you when a new message is displayed on your phone's
status bar.
Swipe up or down on the watch screen to view message content. A maximum of 10 unread
messages can be stored on your watch. If there are more than 10 unread messages, only the
latest 10 messages will be displayed. Each message can be displayed on one screen.
24
• Your band can display messages from the following apps: SMS, Email, Calendar, and
various social media platforms.
• When a new notication comes in, your watch will vibrate to notify you but the screen
won't turn on.
• Whether you can view detailed message content on the watch depends on the
notications settings on your phone. When you disable displaying message content,
the sender and the message content will not be displayed in the status bar, and you
cannot view the detailed message content on your wearable either.
• Whether your watch can receive the notications of audio or video calls depends on
the notication panel display and phone system version.
For phones that run EMUI 10.0 or later, when Banners is selected under Notications,
you can only receive the notication reminder but cannot answer calls directly. When
the full-screen option is selected, you will not receive any notications. If your watch is
paired with a dierent type of Android phone, it will not send you any notications. If
your watch is paired with an iOS phone, it will display notications.
• Your watch will not vibrate to remind you of incoming messages during a workout
session. You can view the message in the message center. Your watch will send you
notications for incoming calls.
• Your watch will still receive notications but will not alert you if your watch is in Do
not disturb, Sleep mode, or it detects you aren't wearing it.
• If you receive a new message when you are reading another message, your watch will
display the new message. You cannot check the content of emails on the watch.
• When your watch is in Do not disturb or Sleep mode or during a workout, it will still
receive notications but will not alert you. You can swipe up on your watch home
screen to view new messages.
• If your phone and watch are connected, your phone will push an alert to your watch
over Bluetooth when you receive an incoming call or message on your phone. Due to
the slight delay in sending information over Bluetooth, your phone and watch will not
receive the alert at exactly the same time.
• Messages that you have viewed on your phone will be deleted from your watch at the
same time.
• Reminders and incoming call notications on your watch won’t be aected if other
Bluetooth devices are also connected to your phone.
• You are able to receive voice messages and images from third-party social media apps
but you are unable to listen to voice messages or view images.
Deleting messages
To delete a message, swipe right on it. To delete all messages, touch Clear .
Convenient life
25
Setting favorite contacts (using a watch to make/
receive a call)
1 Open the Huawei Health app and touch Devices. Touch your device name to access the
watch settings screen. Touch Favorite contacts.
2 Then perform the following:
• Touch ADD and your phone contacts list will appear. Then select the contacts you wish
to add.
• Touch Sequence to sort the contacts you have added.
• Touch Remove to remove a contact you have added.
3 From the home screen press the Up button, swipe until you nd Contacts to call your
favorite contacts from your watch.
1 A maximum of 10 favorite contacts can be added to your watch.
2 Make sure your watch and phone are connected before making a call from you watch.
3 To adjust the volume during the call, touch the speaker icon on the screen or press the
Up button or Down button.
4 A maximum of 30 call records can be saved.
5 Bluetooth calling is only supported with the HUAWEI WATCH GT 2 (46 mm) and the
HUAWEI WATCH GT 2 Pro.
Answering or rejecting incoming calls
When your watch is connected to your phone and you receive a call, your watch will vibrate
and display the caller's number and name. You can choose to answer or reject the call.
• The HUAWEI WATCH GT 2e, HUAWEI WATCH GT and HONOR MagicWatch support
only incoming call notication and call rejection.
• The incoming call information displayed on your watch matches the information
displayed on your phone. If the caller is unknown, the phone number will be displayed.
If you have the number saved in your contacts, the caller's name will be displayed.
• Your watch will not vibrate and turn on its screen upon incoming calls when Do not
disturb is enabled or when you are not wearing your watch.
• You can stop the watch from vibrating by pressing the Up button.
• You can reject an incoming call by touching the reject icon on the watch screen.
• You are able to adjust the volume during calls.
Convenient life
26
Checking your call log
1 From the home screen press the Up button, swipe until you
nd Call Log, touch it to view
call logs.
2 Touch an entry to call them back.
3 Swipe down to the bottom of the screen and touch Clear to clear all call logs.
Playing music
The adding music feature is only supported on phones that run Android 5.0 or later. If
you are using an iOS phone and want to add songs to the watch, connect your watch to
an Android phone, and follow the following methods to add music to the watch. Then
reconnect your watch to your iOS phone. To connect your watch to a new phone, on your
watch, enter the app list, go to Settings > System > Disconnect. Do not reset your watch
when connecting to a new phone. You can only play and control songs stored on the
watch.
1 Open the Huawei Health app, touch Devices, touch the device name, and then touch
Music.
2 Touch Manage music > Add songs, select the music as needed from the list, and touch √
in the upper-right corner of the screen.
3 From the home screen press the Up button, swipe until you
nd Music, and then touch it.
4 Choose music that you have added in the Huawei Health app and then touch the play
icon to play the music.
Convenient life
27
• Music can be played through third-party social media apps, only MP3 and AAC (LC-
AAC) les can be added to the watch locally.
• You can also create a playlist by performing the following: Touch New playlist in
the Huawei Health app and then add the music that has been synced to your watch
to the playlist.
• On the music playback screen of your watch, you can switch between songs, adjust
the volume, and select a playback mode, such as Play in order, Shue, Repeat the
current song, and Repeat list. Swipe up to view the music list, touch the Settings
icon in the lower-right corner of the screen to delete music, connect the watch to
Bluetooth earphones, control the music playback on your watch, or control music
playback on your phone. Using your watch to control the music playback on your
phone is available only on Android phones.
• To use your watch to control music playing on your phone, open the Huawei Health
app, touch Devices and touch your device's name, touch Music and enable Control
phone music.
• You can use your watch to control music playback in third-party music apps on your
phone.
• You can check the amount of storage left available on the watch in the Huawei
Health app by going to Devices > Music > Manage music.
• The HUAWEI WATCH GT 2e music playback function can be used only after a
Bluetooth headset is connected to the phone.
Using Stopwatch or Timer
Stopwatch
From the home screen press the Up button, swipe until you nd Stopwatch, and then touch
it. Touch
to start timing. Touch to reset the stopwatch. Swipe right on your watch
screen to exit Stopwatch.
Timer
From the home screen press the Up button, swipe until you nd Timer, and then touch it. By
default, there are 8 available countdown modes: 1 minute, 3 minutes, 5 minutes, 10 minutes,
15 minutes, 30 minutes, 1 hour, and 2 hours. Choose a countdown mode depending on the
situation.
Touch
to start the countdown, touch to pause the countdown, and touch to
stop the countdown.
You can also customize the timer. On the Timer screen, touch Custom, set the time, and
touch to start the countdown.
Convenient life
28
Swipe right on your watch screen to exit Timer.
Setting an alarm
You can use the Huawei Health app to set a Smart alarm or an Event alarm for your watch.
The Smart alarm will wake you up if it detects that you are in a light sleep during a preset
period. This helps to gradually wake up your brain and make you feel more refreshed.
Method 1: Setting an alarm using your watch
1 From the home screen press the Up button, swipe until you
nd Alarm, touch it, and then
touch + to add an alarm.
2 Set the alarm time and repeat cycle and touch OK.
3 Touch an alarm to edit or delete it.
• If you do not set the repeat cycle, the alarm is a one-time alarm by default.
• Working days (skip holidays) is not supported with alarms set on wearable devices.
• Your device will currently only vibrate but not ring to inform you.
Method 2: Setting a Smart/Event alarm using the Huawei Health app
For Android users:
1 Open the Huawei Health app, touch Devices, touch your device name, and then go to
Alarm > SMART ALARM, or go to Alarm > EVENT ALARMS.
2 Set the alarm time, tag, and repeat cycle.
3 Touch √ in the upper-right corner to save the settings.
4 Swipe down on the home screen to ensure that the alarm settings are synced to your
watch.
5 Touch an alarm to edit or delete it.
For iOS users:
1 Open the Huawei Health app, touch Devices, and then touch your device name from the
device list.
2 Go to Alarm > Event Alarms or go to Alarm > Smart Alarm.
3 Set the alarm time, tag, and repeat cycle.
4 Touch Save.
5 Swipe down on the home screen to ensure that the alarm settings are synced to your
watch.
6 Touch an alarm to edit or delete it.
Convenient life
29
• Event alarms set on your watch can be synced to the Huawei Health app. You can set a
maximum of ve Event alarms.
• You can only set one Smart alarm for your watch.
• The Event alarm will ring at the specied time. If you set a tag for the Event alarm, the
watch will display the tag. Otherwise, only the time will be displayed.
• When an alarm rings, touch on your watch screen, press the up button, or swipe
right on your watch screen to snooze for 10 minutes. To turn o the alarm, touch
on your watch screen or press and hold the Up button.
• When an alarm rings, the alarm will automatically turn o after snoozing three times
if no other operations are performed.
• Currently, only alarms set on on Huawei or Honor phones running EMUI 8.1 or later or
Magic UI 2.0 or later can be synced to the watch.
Using Flashlight
From the home screen press the Up button, swipe until you nd Flashlight, and then touch it
to turn on the ashlight. Touch the screen to turn o the ashlight and touch the screen
again to turn it on. Swipe right on your watch screen to exit Flashlight.
Using the Barometer app
You can check the altitude and atmospheric pressure of your current location on your watch.
From the home screen press the Up button, swipe until you nd Barometer, and touch it to
check the altitude and air pressure of your current location and a graph showing atmospheric
changes of the current day.
Altitude:
Altitude measurement range: –800 to 8800 meters.
Air pressure:
Air pressure measurement range: 300 to 1100 hPa.
Swipe up or down to check altitude and air pressure respectively.
• Swipe on the screen to view the air pressure and altitude value.
• On the Altitude screen, touch Calibrate and adjust it to the current altitude manually.
• On the Air pressure screen, touch Settings, and enable or disable warnings for severe
weather.
Convenient life
30
Using Compass
From the home screen press the Up button, swipe until you nd Compass, touch it, and then
follow the onscreen instructions to calibrate it. After it is successfully calibrated, your watch
will display a compass dial.
The compass of your wearable device does not display the longitude, latitude, and
altitude. You can use your phone to this information. You can also use the barometer of
your wearable device to view the current altitude and air pressure.
Weather reports
You can check your watch to nd out about the weather in your local area.
Method 1: Viewing the weather information on a watch face that can display weather data
Ensure that you are using a watch face that displays weather information, then you can
check the latest weather information on the home screen.
Method 2: Viewing the weather information on the weather screen
Swipe right on the screen until you nd the weather screen, then you can check your
location, the latest weather, temperature
Method 3: Viewing the weather information in the Weather app
From your home screen press the Up button, swipe until you nd Weather, touch it, and
then you can check your location, the latest weather information, temperature, and air
quality.
• To check the weather information on your watch, you are advised to open the Huawei
Health app, touch Devices, touch your device name, and then enable Weather
reports. You can set the Temperature unit to Celsius °C or Fahrenheit °F.
• The weather information displayed on your watch may dier slightly from that
displayed on your phone, since the information is collected from dierent weather
service providers.
• Ensure that you have granted your phone and the Huawei Health app the permission
to access your location. For versions earlier than EMUI 9.0, select Use GPS, WLAN, and
mobile networks as the positioning mode instead of Use GPS only.
Finding your phone using your watch
From the home screen press the Up button, swipe until you nd Find my phone, or swipe
down on the home screen and touch Find Phone. An animation will be displayed on the
screen. If your phone is within Bluetooth range, it will play a ringtone to alert you, even in
Silent mode.
Touch your watch screen or unlock your phone screen to stop playing the ringtone.
Convenient life
31
This feature will only work when your phone and watch are connected.
Convenient life
32
More guidance
Changing watch faces
Method 1: Touch and hold the home screen, and then swipe left or right to choose a watch
face.
Method 2: From the home screen press the Up button, swipe until you nd Settings, touch it,
go to Display > Watch face, and then swipe left or right to choose a watch face.
Method 3: Open the Huawei Health app, touch Devices and then the device name, touch
More next to Watch faces, touch Mine, choose a watch face as needed, and then touch SET
AS DEFAULT.
Setting Gallery watch faces
• Only available on Android phones. If you are using iOS, unpair the device, then pair it
with an Android phone and follow the instructions to transfer photos. The photos will
be saved and you can unpair the device and pair it with your iOS phone again
• This feature requires that the Health app by updated to version 10.0.0.633 or above
and the watch updated to 1.0.1.16 or above.
• You may not be able to set Gallery Watch faces in certain countries and regions.
1 Open the Huawei Health app, touch Devices, go to Watch faces > More > Mine, and
touch Gallery.
2 Touch + and choose to either upload an image from your phone's Gallery or take a new
photo. Then select your desired image and touch Save. Your watch will then display your
customized image, as shown in the following gure:
33
More guidance
34
3 On the Gallery screen in the Huawei Health app, touch Style to customize the font and
color of the displayed time and date.
4 Touch Layout to adjust the position of the displayed time and date.
• Only still images can be used as watch faces. There are no restrictions on the le
format
• A maximum of 20 images can be transferred at one. If you transfer multiple images
an image will be selected randomly and displayed each time the screen wakes up.
You can switch between the images by tapping the screen when it's on.
Installing, replacing, and deleting watch faces
Download and install even more cool watch faces by performing the following:
1 Open the Huawei Health app and touch your watch name. Go to Watch faces > More
and see all the watch faces that are supported on your watch.
2 Select your desired watch face and touch Install. After the watch face is installed, your
watch will automatically display the new watch face.
3 Choose an installed watch face, touch SET AS DEFAULT, and your watch will switch to the
new one.
Deleting a watch face:
To delete a watch face, open the Huawei Health app, touch Devices, touch Watch faces,
touch Mine, select the watch face you want to delete, touch in the upper-right corner,
More guidance
35
and the watch face installed on your watch will then be deleted. Certain preinstalled watch
faces cannot be deleted.
• You cannot download additional watch faces in the Huawei Health app on an iOS
phone. To download new watch faces, you are advised to temporarily pair your watch
with an Android phone. When the downloaded watch faces are synced to your watch,
pair the watch back with your iOS phone.
• To download or delete watch faces, update your watch and the Huawei Health app to
the latest versions.
• You may not be able to download or delete watch faces in certain countries and
regions. For more information, contact the local Huawei hotline.
Setting a standby watch face
When your watch enters standby mode, the standby watch face will be displayed. The
standby watch face is disabled by default. To enable this feature, perform the following:
1 From the home screen press the Up button, swipe until you
nd Settings, touch it, and
then go to Display > Advanced > Lockscreen.
2 Touch Style, choose a type, and then touch OK.
3 Touch Colour, choose a colour, and then touch OK.
• When the watch enters standby mode, touch the standby watch face to switch to
the home screen.
• To disable the standby watch face feature, touch Style, and then chooseNone.
• Enabling the standby watch face feature will drain the battery life by half and
disable the Raise wrist to wake screen feature.
• To enable the standby watch face feature, you are advised to update the HUAWEI
WATCH GT Classic/Active/Sport to version 1.0.8.34 or later, the HUAWEI WATCH GT
Elegant to version 1.0.60.28 or later, or the HONOR Dream/Magic/VIVIENNE TAM to
version 1.0.9.4 or later.
Setting up dual time zones
Touch and hold the watch's home screen to switch designs. Some designs will have a settings
icon beneath them. Touch the icon to enable dual time zone display.
More guidance
36
1 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Huawei-WATCH-GT-2-Pro---VID-B19

  • Waarom geeft de getijde in de weerapp GEEN GEGEVENS aan. Heb m sinds gisteren Gesteld op 6-9-2022 om 14:51

    Reageer op deze vraag Misbruik melden

  • Waarom moet ik mijn bankkaartnummer ingeven terwijl ik de smartwatch in de winkel contant heb betaald. Ik hoef aan jullie niets te betalen, dus waarom moet ik mijn bankkaartnummer ingeven. Ik kan mijn horloge wel niet operationeel maken. Gesteld op 30-5-2022 om 17:19

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huawei WATCH GT 2 Pro - VID-B19 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huawei WATCH GT 2 Pro - VID-B19 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Huawei WATCH GT 2 Pro - VID-B19

Huawei WATCH GT 2 Pro - VID-B19 Gebruiksaanwijzing - Nederlands - 40 pagina's

Huawei WATCH GT 2 Pro - VID-B19 Gebruiksaanwijzing - Deutsch - 39 pagina's

Huawei WATCH GT 2 Pro - VID-B19 Snelstart handleiding - Alle talen - 257 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info