670821
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
5
EN
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
TABLET DETERGENT (All-in-one)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the TABLET DETERGENT button (the indicator light
will light up) if you use
All-in-one detergents
in tablet form
(rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option
should be off.
ZONE WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select a compatible program (see “Programs table”),
and then press the ZONE WASH button: the symbol of the
chosen rack will appear on the display:
(only lower rack selected)
(only upper rack selected)
By default the appliance washes dishes in all racks.
Option is OFF.
ZONE WASH 3D
Thanks to the additional 3D water jets placed on the bottom of
the cavity, ZONE WASH 3D option allows to save energy or to
increase the washing performance of the dishwasher.
It is compatible with Normal and Intensive cycles, and it
works with one rack at once.
3D ZONE WASH + NORMAL CYCLE: it allows to reduce
energy consumption up to 40%.
3D ZONE WASH + INTENSIVE CYCLE: it increases the
washing performances up to 40%. Ideal for very soiled
mixed loads, e.g. pans and saucepans, dishes with
heavy encrustation or difficult-to-clean crockery
(grater, vegetable mill, dirty cutlery).
How to activate the option:
1. Select a compatible cycle (Normal or Intensive)
2.Press 3D button to activate the option: a basket icon will
blink for a few seconds.
3.It is possible to change the selected rack pressing the
ZONE WASH button.
Remember to load the crockery in the selected rack
only.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
TURBO
This option can be used to reduce the duration of the
main programs while maintaining the same washing and
drying performance levels.
Select a compatible program (see “Programs table”),
press the TURBO button and the indicator light will switch
on. To deselect the option, press the same button again.
EXTRA DRY
To improve the drying of the dishes, after selecting the
program, press the EXTRA DRY button and the indicator
light comes on.
A higher temperature during the final rinse and an extended
drying phase allow for improving drying. To deselect the
option, press the same button again. The EXTRA DRY option
results in the lengthening of the wash cycle.
START DELAY
The start of the program may be delayed for a period of
time between 0:30 and 24 hours.
1. Select the program and any desired options. Press the
DELAY button (repeatedly) to delay the start of the
program. Adjustable from 0:30 to 24 hours. When 24
hours is setting has been reached, press the START
DELAY another time to deactivate the START DELAY
function.
2. Press the START button and close the door within 4 sec.:
the timer will begin counting down;
3. Once this time has elapsed, the indicator light switches
off and the program begins automatically.
The START DELAY function cannot be set once a
program has been started.
LIGHT ON THE FRONT
A LED light projected on the floor indicates that the
dishwasher is working.
The light stays on during the cycle and switches off at the
end of the cycle.
If the delayed start was set, the light goes on for the entire
duration of the countdown.
This feature is active by default, but it is possible to
deactivate it in the “SETTINGS MENU”.
INTERNAL LIGHTS
When the feature is active the LEDs in the tub are
automatically switched on/off as soon as the user
open/close the door respectively.
If the door remains opened for more than 10 min, the LEDs in
the tub switch off (to turn them on again, the door has to be
closed and opened again).
This feature is active by default, but it is possible to
deactivate it in the “SETTINGS MENU”.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps
will sound. The option will not be enabled.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hotpoint HIP4022 WGT - Ultima bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hotpoint HIP4022 WGT - Ultima in de taal/talen: Engels als bijlage per email.

De handleiding is 7,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info