8 04.2007 TR10A041-C RE
1.2.2 Carrying out the installation work
Note
The fixing materials supplied must be inspected for suit-
ability for the specific place of installation by the person
carrying out the installation.
The clearance between the highest point of the door
and the ceiling (also when the door is opening) must
be at least 30 mm (see fig. 1.1a/1.1b ). If clearance is
inadequate, the operator may also be installed behind
the opened door, provided sufficient space is available.
In such instances, an extended door link must be used
(to be ordered separately). The garage door operator can
be positioned off-centre by max. 50 cm, the exception
being sectional doors with high-lift tracks ("H" tracks),
where a special track fitting is required.
The required power outlet should be installed at a dis-
tance of approx. 50 cm from the operator head.
Please check these dimensions!
1.3 Warnings
Permanently installed controls (such as
push-buttons, switches etc.) have to be
installed within sight of the door but well
away from any moving parts at a height
of at least 1.5 m. It is vital that they are
installed out of the reach of children.
Note
A sign warning about the trap hazard must be permanently
affixed at a conspicuous location or in the proximity of the
permanently installed push-buttons used to operate the
door.
Make sure that
- neither persons nor objects are located
within the door’s range of travel.
- children do not play around with the
door system.
- the rope of the mechanical release on
the carriage cannot become entangled
in the ceiling’s support system or in any
other protruding parts of vehicles or the
door.
ATTENTION
For garages without a second access door, an
emergency release must be fitted to ensure
that there is no danger of getting locked out.
This must be ordered separately and its function
checked once a month.
ATTENTION
Do not allow anyone to hang bodily from the
pull rope with knob.
1.4 Maintenance advice
The garage door operator is maintenance-free. For your
own safety, however, we recommend having the door
system checked by a specialist in accordance with
the manufacturer’s specifications.
Inspection and maintenance work may only be carried
out by a specialist. In this connection, please contact
your supplier. A visual inspection may be carried out by
the owner.
If repairs become necessary, please contact your supplier.
We would like to point out that any repairs not carried
out properly or with due professionalism shall render the
warranty null and void.
1.5 Information on the illustrated section
The illustrated section shows installation of the operator
on a sectional door.
Where installation differs for an up-and-over door, this is
shown in addition.
In this instance, letters are assigned to the figures as
follows:
O
a to a sectional door and
O
b
to an up-and-over door.
Some of the figures additionally include the symbol
shown below, offering a text reference. This text reference
provides you with important information regarding installa-
tion and operation of the garage door operator in the
following illustrated section.
Example:
= see text section, point 2.2
In addition, in both the text section and the illustrated
section at the points where the menus of the operator
are explained, the following symbol appears to indicate
a factory setting or settings.
= factory setting
Copyright.
No part of this manual may be reproduced
without our prior permission. Subject to changes.
