538744
25
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
TR20A088 RE / 02.2012
DE
Bedienungsanleitung
Handsender HS 1 BiSecur / HS 4 BiSecur
EN
Operating instructions
Hand transmitter HS 1 BiSecur / HS 4 BiSecur
FR
Instructions d’utilisation
Emetteur HS 1 BiSecur / HS 4 BiSecur
NL
Bedieningshandleiding
Handzender HS 1 BiSecur / HS 4 BiSecur
IT
Istruzioni d’uso
Telecomando HS 1 BiSecur / HS 4 BiSecur
ES
Instrucciones de servicio
Emisor manual HS 1 BiSecur / HS 4 BiSecur
PT
Instruções de funcionamento
Emissor HS 1 BiSecur / HS 4 BiSecur
DEUTSCH ..........3
ENGLISH .......... 14
FRANÇAIS ......... 25
NEDERLANDS...... 36
ITALIANO..........47
ESPAÑOL.......... 58
PORTUGUÊS....... 70
1 Zu dieser Anleitung ........................................................4
2 Sicherheitshinweise .......................................................4
2.1 Bestimmungsgemäße Verwendung .................................4
2.2 Sicherheitshinweise zum Betrieb des Handsenders ........5
3 Lieferumfang ...................................................................6
4 Beschreibung des Handsenders HS 1 BiSecur /
HS 4 BiSecur ...................................................................7
5 Inbetriebnahme ..............................................................7
5.1 Batterie einlegen ..............................................................7
6 Betrieb .............................................................................8
7 Lernen und Vererben/Senden eines Funkcodes .........9
7.1 Lernen eines Funkcodes ..................................................9
7.2 Mischbetrieb / BiSecur und Festcode 868 MHz ............10
8 Geräte-Reset ................................................................10
8.1 Festcode 868 MHz einstellen .........................................11
9 LED-Anzeige .................................................................11
10 Reinigung ......................................................................12
11 Entsorgung ...................................................................13
12 Technische Daten .........................................................13
Inhaltsverzeichnis
Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung
seines Inhalts sind verboten, soweit nicht ausdrücklich gestattet.
Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der
Patent-, Gebrauchsmuster- oder Geschmacksmustereintragung vorbehalten.
Änderungen vorbehalten.
TR20A088 RE / 02.2012 3
DEUTSCH
Sehr geehrte Kundin, sehr geehrter Kunde,
wir bedanken uns, dass Sie sich für ein Qualitätspro-
dukt aus unserem Hause entschieden haben.
Zu dieser Anleitung1
Lesen Sie diese Anleitung sorgfältig und vollständig
durch, sie enthält wichtige Informationen zum Pro-
dukt. Beachten Sie die Hinweise und befolgen Sie
insbesondere die Sicherheits- und Warnhinweise.
Weitere Informationen zur Handhabung des
Handsenders finden Sie im Internet unter
www.hoermann.com
Bewahren Sie diese Anleitung sorgfältig auf und
stellen Sie sicher, dass sie jederzeit verfügbar und
vom Benutzer des Produkts einsehbar ist.
Sicherheitshinweise2
Bestimmungsgemäße Verwendung2.1
Der Handsender HS 1 BiSecur / HS 4 BiSecur ist ein
unidirektionaler Sender für Antriebe und deren
Zubehör. Er kann mit dem BiSecur-Funk sowie mit
dem Festcode 868 MHz betrieben werden.
Andere Anwendungsarten sind unzulässig. Der Her-
steller haftet nicht für Schäden, die durch bestim-
mungswidrigen Gebrauch oder falsche Bedienung
verursacht werden.
4 TR20A088 RE / 02.2012
DEUTSCH
Sicherheitshinweise zum Betrieb des 2.2
Handsenders
WARNUNG
Verletzungsgefahr bei Torbewegung
Wird der Handsender bedient, können Personen
durch die Torbewegung verletzt werden.
Stellen Sie sicher, dass Handsender nicht in
Kinderhände gelangen und nur von Personen
benutzt werden, die in die Funktionsweise der
ferngesteuerten Toranlage eingewiesen sind!
Sie müssen den Handsender generell mit
Sichtkontakt zum Tor bedienen, wenn dieses
nur über eine Sicherheitseinrichtung verfügt!
Durchfahren bzw. durchgehen Sie Toröff-
nungen von ferngesteuerten Toranlagen erst,
wenn das Tor in der Endlage Tor-Auf steht!
Bleiben Sie niemals im Bewegungsbereich des
Tores stehen.
Beachten Sie, dass am Handsender versehent-
lich eine Taste betätigt werden kann (z. B. in
der Hosen-/Handtasche) und es hierbei zu
einer ungewollten Torfahrt kommen kann.
VORSICHT
Verletzungsgefahr durch unbeabsichtigte Tor-
fahrt
Siehe Warnhinweis Kapitel
7
TR20A088 RE / 02.2012 5
DEUTSCH
ACHTUNG
Beeinträchtigung der Funktion durch Umwelt-
einflüsse
Bei Nichtbeachtung kann die Funktion beeinträch-
tigt werden!
Schützen Sie den Handsender vor folgenden Ein-
flüssen:
direkter Sonneneinstrahlung (zul. Umgebungs-•
temperatur: -20 °C bis +60 °C)
Feuchtigkeit•
Staubbelastung•
HINWEISE:
Ist kein separater Zugang zur Garage vorhanden, •
führen Sie jede Änderung oder Erweiterung von
Funk-Systemen innerhalb der Garage durch.
Führen Sie nach dem Programmieren oder Erwei-•
tern des Funk-Systems eine Funktionsprüfung
durch.
Verwenden Sie für die Inbetriebnahme oder die •
Erweiterung des Funk-Systems ausschließlich
Originalteile.
Die örtlichen Gegebenheiten können Einfluss auf •
die Reichweite des Funk-Systems haben.
GSM 900-Handys können bei gleichzeitiger •
Benutzung die Reichweite beeinflussen.
Lieferumfang3
Handsender HS 1 BiSecur oder •
Handsender HS 4 BiSecur
1x 1,5 V Batterie, Typ: AAA (LR03)•
Batteriedeckel•
Bedienungsanleitung•
6 TR20A088 RE / 02.2012
DEUTSCH
Beschreibung des Handsenders 4
HS 1 BiSecur / HS 4 BiSecur
1 LED, bicolor
2 Handsendertaste bzw. Handsendertasten
3 Batteriedeckel
4 Batterie
Inbetriebnahme5
Nach dem Einsetzen der Batterie ist der Handsender
HS 1 BiSecur / HS 4 BiSecur betriebsbereit.
Batterie einlegen5.1
TR20A088 RE / 02.2012 7
DEUTSCH
ACHTUNG
Zerstörung des Handsenders durch auslau-
fende Batterie
Batterien können auslaufen und den Handsender
zerstören.
Entfernen Sie die Batterie aus dem Hand-
sender, wenn dieser längere Zeit nicht benutzt
wird.
Betrieb6
HINWEIS:
Wurde der Funkcode der eingelernten Handsender-
taste zuvor von einem anderen Handsender kopiert,
muss die Handsendertaste zum ersten Betrieb ein
zweites Mal gedrückt werden.
Jeder Handsendertaste ist ein Funkcode zugeordnet.
Drücken Sie die Handsendertaste, deren Funkcode
Sie senden möchten.
Der Funkcode wird gesendet und die LED
leuchtet 2 Sekunden blau.
HINWEIS:
Ist die Batterie fast leer, blinkt die LED 2x rot
vor dem Senden des Funkcodes.a.
Die Batterie
sollte in Kürze ersetzt werden.
und es erfolgt kein Senden des Funkcodes.b.
Die Batterie
muss umgehend ersetzt werden.
8 TR20A088 RE / 02.2012
DEUTSCH
7 Lernen und Vererben/Senden
eines Funkcodes
VORSICHT
Verletzungsgefahr durch unbeabsichtigte Tor-
fahrt
Während des Lernvorgangs am Funk-System kann
es zu unbeabsichtigten Torfahrten kommen.
Achten Sie darauf, dass sich beim Einlernen
des Funk-Systems keine Personen oder
Gegenstände im Bewegungsbereich des Tores
befinden.
Lernen eines Funkcodes7.1
Drücken Sie die Handsendertaste vom Hand-1.
sender A, deren Funkcode Sie vererben möchten
und halten Sie diese gedrückt.
Der Funkcode wird gesendet; die LED leuchtet
2 Sekunden blau und erlischt.
Nach 5 Sekunden blinkt die LED abwechselnd
rot und blau; der Funkcode wird gesendet.
Legen Sie den Handsender 2. B, der den Funkcode
lernen soll, links daneben.
Drücken Sie die Handsendertaste, der der neue 3.
Funkcode zugeordnet werden soll und halten Sie
diese gedrückt.
TR20A088 RE / 02.2012 9
DEUTSCH
Die LED blinkt langsam blau.
Wird der Funkcode erkannt, blinkt die LED
schnell blau.
Nach 2 Sekunden erlischt die LED.
HINWEIS:
Zum Vererben/Senden haben Sie 15 Sekunden Zeit.
Wird innerhalb dieser Zeit der Funkcode nicht erfolg-
reich vererbt/gesendet muss der Vorgang wiederholt
werden.
Mischbetrieb / BiSecur und Festcode 7.2
868 MHz
Bei eingestelltem BiSecur-Funk ist mit dem Hand-
sender HS 4 BiSecur ein Mischbetrieb möglich; d. h.
vorhandene Handsender mit Festcode 868 MHz
(graue Handsender mit blauen Tasten oder Geräte-
kennzeichnung z. B. HSD2-868) können vom
BiSecur-Handsender gelernt werden.
Geräte-Reset8
Jeder Handsendertaste wird durch folgende Schritte
ein neuer Funkcode zugeordnet.
Öffnen Sie den Batteriedeckel und entnehmen 1.
Sie die Batterie für 10 Sekunden.
Drücken Sie eine Handsendertaste und halten Sie 2.
sie gedrückt.
Legen Sie die Batterie ein und schließen Sie den 3.
Batteriedeckel.
Die LED blinkt 4 Sekunden langsam blau.
Die LED blinkt 2 Sekunden schnell blau.
Die LED leuchtet lange blau.
Lassen Sie die Handsendertaste los.4.
Alle Funkcodes sind neu zugeordnet.
10 TR20A088 RE / 02.2012
DEUTSCH
HINWEIS:
Wird die Handsendertaste vorzeitig losgelassen,
werden keine neuen Funkcodes zugeordnet.
Festcode 868 MHz einstellen8.1
Wird unmittelbar nach dem Geräte-Reset die Hand-
sendertaste weiterhin gedrückt, wird der Festcode
868 MHz aktiviert.
Die LED blinkt 4 Sekunden langsam rot.
Die LED blinkt 2 Sekunden schnell rot.
Die LED leuchtet lange rot.
Alle Funkcodes sind neu zugeordnet.
HINWEIS:
Wird die Handsendertaste vorzeitig losgelassen,
bleibt der BiSecur-Funk eingestellt.
Weitere Informationen zum Betrieb des Handsenders
mit dem Festcode 868 MHz finden Sie im Internet
unter www.hoermann.com
LED-Anzeige9
Blau (BU)
Zustand Funktion
leuchtet 2 Sek. ein Funkcode wird
gesendet
blinkt langsam Handsender befindet sich
im Modus Lernen
blinkt schnell nach lang-
samem Blinken
beim Lernen wurde ein
gültiger Funkcode
erkannt
blinkt 4 Sek. langsam,
blinkt 2 Sek. schnell,
leuchtet lang
Geräte-Reset wird durch-
geführt bzw. abge-
schlossen
TR20A088 RE / 02.2012 11
DEUTSCH
Rot (RD)
Zustand Funktion
blinkt 2x die Batterie ist fast leer
Blau (BU) und Rot (RD)
Zustand Funktion
abwechselndes Blinken Handsender befindet sich
im Modus Vererben/
Senden
Reinigung10
ACHTUNG
Beschädigung des Handsenders durch falsche
Reinigung
Das Reinigen des Handsenders mit ungeeigneten
Reinigungsmitteln kann das Handsender-Gehäuse
sowie die Handsendertasten angreifen.
Reinigen Sie den Handsender nur mit einem
sauberen, weichen und feuchten Tuch.
HINWEIS:
Weiße Handsendertasten können sich bei regelmä-
ßigem Gebrauch über einen längeren Zeitraum ver-
färben, wenn sie in Kontakt mit Kosmetik-Produkten
(z.B. Handcreme) kommen.
12
TR20A088 RE / 02.2012
DEUTSCH
Entsorgung11
Elektro- und Elektronik-Geräte sowie Batte-
rien dürfen nicht als Haus- oder Restmüll
entsorgt werden, sondern müssen in den
dafür eingerichteten Annahme- und Sammel-
stellen abgegeben werden.
Technische Daten12
Typ Handsender HS 1 BiSecur /
Handsender HS 4 BiSecur
Frequenz 868 MHz
Spannungsversorgung 1x 1,5 V Batterie,
Typ: AAA (LR03)
zul. Umgebungs-
temperatur
-20 °C bis +60 °C
Schutzart IP 20
TR20A088 RE / 02.2012 13
DEUTSCH
1 About these instructions .............................................15
2 Safety guidelines ..........................................................15
2.1 Intended use ..................................................................15
2.2 Safety instructions for operating
the hand transmitter .......................................................16
3 Scope of delivery ..........................................................17
4 Description of the hand transmitter
HS 1 BiSecur / HS 4 BiSecur .......................................18
5 Initial start-up ...............................................................18
5.1 Insert battery ..................................................................19
6 Operation ......................................................................19
7 Learning and inheriting / transmitting
a radio code ..................................................................20
7.1 Teaching in a radio code ................................................20
7.2 Mixed operation / BiSecur and fixed
code 868 MHz ................................................................21
8 Reset .............................................................................21
8.1 Set the fixed code 868 MHz...........................................22
9 LED display ...................................................................22
10 Cleaning ........................................................................23
11 Disposal ........................................................................24
12 Technical data ..............................................................24
Contents
Dissemination as well as duplication of this document and the use and
communication of its content are prohibited unless explicitly permitted.
Non-compliance will result in damage compensation obligations. All rights
reserved in the event of patent, utility model or design model registration.
Subject to changes.
14 TR20A088 RE / 02.2012
ENGLISH
Dear Customer,
We thank you for choosing a quality product from our
company.
About these instructions1
Read through all of the instructions carefully, as they
contain important information about the product. Pay
attention to and follow the instructions provided,
particularly the safety instructions and warnings.
Further information about handling the hand
transmitter can be found on the Internet at
www. hoermann.com
Please keep these instructions in a safe place and
make sure that they are available to all users at all
times.
Safety guidelines2
Intended use2.1
The hand transmitter HS 1 BiSecur / HS 4 BiSecur is
a unidirectional transmitter for operators and their
accessories. It can be operated with both the BiSecur
radio and the fixed code 868 MHz.
Other types of application are prohibited. The
manufacturer is not liable for damage caused by
improper use or incorrect operation.
TR20A088 RE / 02.2012 15
ENGLISH
Safety instructions for operating the hand 2.2
transmitter
WARNING
Danger of injury during door travel
Persons may be injured by door travel if the hand
transmitter is actuated.
Make sure that the hand transmitters are kept
away from children and can only be used by
people who have been instructed on how the
remote-control door functions!
If the door has only one safety device, only
operate the hand transmitter if you are within
sight of the door!
Only drive or pass through remote control door
systems if the door is in the Open end-of-travel
position!
Never stand in the door’s area of travel.
Please note that unwanted door travel may
occur if a hand transmitter button is
accidentally pressed (e.g. if stored in
a pocket / handbag).
CAUTION
Danger of injuries due to unintended door travel
See warning in section
7
16 TR20A088 RE / 02.2012
ENGLISH
ATTENTION
Functional impairment due to environmental
influences
Non-compliance with these instructions can impair
function!
Protect the hand transmitter from the following
conditions:
Direct sunlight (permissible ambient •
temperature: -20 °C to +60 °C)
Moisture•
Dust•
NOTES:
If there is no separate garage entrance, perform •
all programming changes and extensions of radio
systems from inside the garage.
After programming or extending the radio •
system, perform a function test.
Only use original components when putting the •
radio system into service or extending it.
Local conditions may affect the range of the radio •
system.
When used at the same time, GSM 900 mobile •
phones can affect the range.
Scope of delivery3
Hand transmitter HS 1 BiSecur or •
hand transmitter HS 4 BiSecur
1x1.5 V battery, type: AAA (LR03)•
Battery lid•
Operating instructions•
TR20A088 RE / 02.2012 17
ENGLISH
Description of the hand 4
transmitter HS 1 BiSecur /
HS 4 BiSecur
1 LED, bi-colour
2 Hand transmitter button or hand transmitter
buttons
3 Battery lid
4 Battery
Initial start-up5
After inserting the battery, the hand transmitter
HS 1 BiSecur / HS 4 BiSecur is ready for operation.
18 TR20A088 RE / 02.2012
ENGLISH
Insert battery5.1
ATTENTION
Destruction of the hand transmitter by leaking
batteries
Batteries can leak and destroy the hand
transmitter.
Remove the battery from the hand transmitter
if it is out of use for a long period of time.
Operation6
NOTE:
If the radio code for the taught-in hand transmitter
was copied from another hand transmitter, the hand
transmitter button must be pressed a second time
during initial start-up.
Each hand transmitter button is assigned to a radio
code. Press the button of the hand transmitter whose
radio code you want to transmit.
The radio code is transmitted and the LED is
illuminated blue for 2 seconds.
NOTE:
If the battery is almost empty, the LED flashes red twice
before transmitting the radio code.a.
The battery
should be replaced soon.
TR20A088 RE / 02.2012 19
ENGLISH
and the radio code is not transmitted.b.
The battery
must be replaced immediately.
7 Learning and inheriting /
transmitting a radio code
CAUTION
Danger of injuries due to unintended door travel
Unintended door travel may occur while teaching in
the radio code.
Make sure no persons or objects are in the
door's area of travel when teaching in the radio
system.
Teaching in a radio code7.1
Press the hand transmitter button on hand 1.
transmitter A, whose radio code is to be
inherited, and keep it pressed.
The radio code is transmitted and the LED is
illuminated blue for 2 seconds then goes out.
After 5 seconds, the LED alternates flashing in
red and blue; the radio code is transmitted.
Place hand transmitter 2. B into which you want to
teach in the radio code, to its left.
Press the hand transmitter button to which the new 3.
radio code is to be allocated, and keep it pressed.
20 TR20A088 RE / 02.2012
ENGLISH
The LED will flash slowly in blue.
If the radio code is recognised, the LED
flashes quickly in blue.
After 2 seconds, the LED goes out.
NOTE:
You have 15 seconds to inherit / transmit the code.
The process must be repeated if the radio code is not
successfully inherited / transmitted within this time.
Mixed operation / BiSecur and fixed 7.2
code 868 MHz
If the BiSecur radio has been set, mixed operation
with HS 4 BiSecur hand transmitters is possible, i.e.
existing hand transmitters with an 868 MHz fixed
code (grey hand transmitters with blue buttons or the
device designation HSD2-868) can be taught in from
the BiSecur hand transmitter.
Reset8
Each hand transmitter button is assigned to a new
radio code by means of the following steps.
Open the battery lid and remove the battery for 1.
10 seconds.
Press a hand transmitter button and keep it 2.
pressed.
Insert the battery and close the battery lid.3.
The LED slowly flashes in blue for 4 seconds.
The LED flashes rapidly in blue for 2 seconds.
The LED is illuminated blue for a long time.
Release the hand transmitter button.4.
All radio codes are newly assigned.
NOTE:
If the hand transmitter button is released prematurely,
no new radio codes are assigned.
TR20A088 RE / 02.2012 21
ENGLISH
Set the fixed code 868 MHz8.1
If immediately following the device reset, the hand
transmitter button remains pressed, the fixed code
868 MHz will be activated.
The LED slowly flashes in red for 4 seconds.
The LED flashes rapidly in red for 2 seconds.
The LED is illuminated red for a long time.
All radio codes are newly assigned.
NOTE:
If the hand transmitter button is released prematurely,
the BiSecur radio will remain active.
Further information about operating the hand
transmitter with the fixed code 868 MHz can be found
on the Internet at www.hoermann.com
LED display9
Blue (BU)
Condition Function
Illuminated for 2 seconds A radio code is being
transmitted
Flashes slowly Hand transmitter is in the
learn mode
Flashes quickly after
slow flashing
A valid radio code was
discovered during the
learning
Flashes slowly for
4 seconds
Flashes quickly for
2 seconds
Illuminated long
Device reset is being
performed or completed
22 TR20A088 RE / 02.2012
ENGLISH
Red (RD)
Condition Function
Flashes 2x The battery is almost
empty
Blue (BU) and Red (RD)
Condition Function
Flashing alternately Hand transmitter is in
inherit / transmit mode
Cleaning10
ATTENTION
Damaging the hand transmitter by faulty
cleaning
Cleaning the hand transmitter with unsuitable
cleaning agents can damage the hand transmitter
housing as well as the hand transmitter buttons.
Clean the hand transmitter with a clean, soft,
damp cloth.
NOTE:
White hand transmitter buttons can change their
colour when used regularly over an extended period
of time, if they come in contact with cosmetic
products (e.g. hand cream).
TR20A088 RE / 02.2012 23
ENGLISH
Disposal11
Electrical and electronic devices, as well as
batteries, may not be disposed of in
household rubbish, but must be returned to
the appropriate recycling facilities.
Technical data12
Type Hand transmitter HS 1 BiSecur /
hand transmitter HS 4 BiSecur
Frequency 868 MHz
Power supply 1x1.5 V battery,
type: AAA (LR03)
Perm. ambient
temperature -20°C to +60°C
Protection category IP 20
24
TR20A088 RE / 02.2012
ENGLISH
1 A propos de ce mode d’emploi ...................................26
2 Consignes de sécurité .................................................26
2.1 Utilisation appropriée .....................................................26
2.2 Consignes de sécurité concernant le
fonctionnement de l’émetteur ........................................27
3 Matériel livré .................................................................28
4 Description de l’émetteur
HS 1 BiSecur / HS 4 BiSecur ........................................29
5 Mise en service.............................................................29
5.1 Introduction de la pile.....................................................29
6 Fonctionnement ...........................................................30
7 Apprentissage et transmission / envoi d’un
code radio .....................................................................31
7.1 Apprentissage d’un code radio ......................................31
7.2 Fonctionnement mixte / BiSecur et code
fixe 868 MHz ..................................................................32
8 Réinitialisation de l’appareil ........................................32
8.1 Réglage du code fixe 868 MHz ......................................33
9 Affichage par LED ........................................................33
10 Nettoyage ......................................................................34
11 Elimination des déchets ..............................................35
12 Données techniques ....................................................35
Table des matières
Toute transmission ou reproduction de ce document, toute exploitation ou
communication de son contenu sont interdites, sauf autorisation expresse.
Tout manquement à cette règle est illicite et expose son auteur au versement de
dommages et intérêts. Tous droits réservés en cas de dépôt d’un brevet, d’un
modèle d’utilité ou d’agrément. Sous réserve de modifications.
TR20A088 RE / 02.2012 25
FRANÇAIS
Cher client,
Nous vous remercions d’avoir opté pour un produit
de qualité de notre société.
A propos de ce mode d’emploi1
Lisez attentivement et entièrement les présentes
instructions. Elles contiennent d’importantes
informations concernant ce produit. Veuillez tenir
compte des remarques et en particulier respecter
toutes les consignes de sécurité et de danger.
De plus amples informations au sujet de l’utilisation
de l’émetteur sont disponibles sur le site Internet
www.hoermann.com
Conservez précieusement les présentes instructions
et assurez-vous que tous les utilisateurs puissent les
consulter à tout moment.
Consignes de sécurité2
Utilisation appropriée2.1
L’émetteur HS 1 BiSecur / HS 4 BiSecur est un
émetteur unidirectionnel pour les motorisations et
leurs accessoires. Il peut être utilisé avec le système
radio BiSecur ainsi qu’avec le code fixe 868 MHz.
Tout autre type d’utilisation est interdit. Le fabricant
décline toute responsabilité en cas de dommages
provenant d’une utilisation inappropriée ou incorrecte.
26 TR20A088 RE / 02.2012
FRANÇAIS
Consignes de sécurité concernant le 2.2
fonctionnement de l’émetteur
AVERTISSEMENT
Risque de blessure dû à un mouvement de
porte
L’utilisation de l’émetteur est susceptible de
blesser des personnes en raison du mouvement de
porte.
Assurez-vous que les émetteurs restent hors
de portée des enfants et qu’ils sont
uniquement utilisés par des personnes déjà
initiées au fonctionnement de l’installation de
porte télécommandée !
Vous devez en règle générale commander
l’émetteur avec contact visuel direct à la porte
si cette dernière ne dispose que d’un dispositif
de sécurité !
N’empruntez les ouvertures de porte
télécommandées en véhicule ou à pied que
lorsque la porte s’est immobilisée en position
finale Ouvert !
Ne restez jamais dans la zone de déplacement
de la porte.
Veuillez noter que l’une des touches
d’émetteur peut être actionnée par mégarde
(par ex. dans une poche / un sac à main) et
ainsi provoquer un trajet de porte involontaire.
PRECAUTION
Risque de blessure dû à un trajet de porte
involontaire
Voir avertissement au chapitre
7
TR20A088 RE / 02.2012 27
FRANÇAIS
ATTENTION
Altération du fonctionnement due à des
intempéries
En cas de non-respect, le fonctionnement peut être
altéré !
Protégez l’émetteur des influences suivantes :
Exposition directe au soleil (température •
ambiante autorisée : –20 °C à +60 °C)
Humidité•
Poussière•
REMARQUES :
Si le garage ne dispose d’aucun accès séparé, •
toute modification ou extension des systèmes
radio doit avoir lieu à l’intérieur même du garage.
Après la programmation ou l’extension du •
système radio, procédez toujours à un essai de
fonctionnement.
Pour la mise en service ou l’extension du •
système radio, utilisez exclusivement des pièces
d’origine.
Les impératifs locaux peuvent exercer une •
influence sur la portée du système radio.
L’utilisation simultanée de téléphones portables •
GSM 900 peut affecter la portée.
Matériel livré3
Emetteur HS 1 BiSecur ou •
émetteur HS 4 BiSecur
1 × pile 1,5 V, type : AAA (LR03)•
Cache du compartiment à piles•
Instructions d’utilisation•
28 TR20A088 RE / 02.2012
FRANÇAIS
Description de l’émetteur 4
HS 1 BiSecur / HS 4 BiSecur
1 LED bicolore
2 Touche(s) d’émetteur
3 Cache du compartiment à piles
4 Pile
Mise en service5
Une fois la pile introduite, l’émetteur HS 1 BiSecur /
HS 4 BiSecur est opérationnel.
Introduction de la pile5.1
TR20A088 RE / 02.2012 29
FRANÇAIS
ATTENTION
Destruction de l’émetteur due à une fuite de la
pile
Les piles peuvent fuir et détruire l’émetteur.
Si vous n’utilisez pas l’émetteur sur une
période prolongée, retirez la pile de celui-ci.
Fonctionnement6
REMARQUE :
Si le code radio de la touche d’émetteur apprise a été
préalablement copié depuis un autre émetteur, la
touche d’émetteur doit être actionnée une seconde
fois pour le premier fonctionnement.
Un code radio est affecté à chaque touche
d’émetteur. Appuyez sur la touche d’émetteur dont
vous souhaitez envoyer le code radio.
Le code radio est envoyé et la LED s’allume
en bleu pendant 2 secondes.
REMARQUE :
Lorsque la pile est presque vide, la LED clignote 2 ×
au rouge :
Avant l’envoi du code radio.a.
Vous
devriez remplacer la pile prochainement.
Et aucun envoi du code radio n’a lieu.b.
Vous
devez immédiatement remplacer la pile.
30 TR20A088 RE / 02.2012
FRANÇAIS
7 Apprentissage et transmission /
envoi d’un code radio
ATTENTION
Risque de blessure dû à un trajet de porte
involontaire
Pendant la procédure d’apprentissage du système
radio, des trajets de porte involontaires peuvent se
déclencher.
Lors de l’apprentissage du système radio,
veillez à ce qu’aucune personne ni aucun objet
ne se trouve dans la zone de déplacement de
la porte.
Apprentissage d’un code radio7.1
Appuyez sur la touche d’émetteur de l’émetteur 1. A
dont vous souhaitez transmettre le code radio et
maintenez-la enfoncée.
Le code radio est envoyé ; la LED s’allume en
bleu pendant 2 secondes, puis s’éteint.
Après 5 secondes, la LED clignote en
alternance au rouge et au bleu ; le code radio
est envoyé.
Placez l’émetteur 2. B devant apprendre le code
radio à sa gauche.
TR20A088 RE / 02.2012 31
FRANÇAIS
Appuyez sur la touche d’émetteur à laquelle doit 3.
être affecté le nouveau code radio et
maintenez-la enfoncée.
La LED clignote lentement au bleu.
Lorsque le code radio est reconnu, la LED
clignote rapidement au bleu.
La LED s’éteint après 2 secondes.
REMARQUE :
Pour procéder à une transmission / un envoi, vous
disposez de 15 secondes. Si le code radio n’est pas
transmis / envoyé dans cet intervalle, la procédure
doit être réitérée.
Fonctionnement mixte / BiSecur et code 7.2
fixe 868 MHz
Lorsque le système radio BiSecur est enclenché,
un fonctionnement mixte est possible avec
l’émetteur HS 4 BiSecur. Cela signifie que les
émetteurs disponibles avec code fixe 868 MHz
(émetteurs gris à touches bleues ou identification de
l’appareil par ex. HSD2-868) peuvent être appris par
l’émetteur BiSecur.
Réinitialisation de l’appareil8
Les étapes suivantes permettent d’affecter un
nouveau code radio à chaque touche d’émetteur.
Ouvrez le compartiment à piles et retirez la pile 1.
pendant 10 secondes.
Appuyez sur une touche d’émetteur et 2.
maintenez-la enfoncée.
Introduisez la pile et fermez le compartiment à piles.3.
La LED clignote lentement au bleu pendant
4 secondes.
La LED clignote rapidement au bleu pendant
2 secondes.
32 TR20A088 RE / 02.2012
FRANÇAIS
La LED s’allume longuement en bleu.
Relâchez la touche d’émetteur.4.
Tous les codes radio sont réattribués.
REMARQUE :
Si vous relâchez la touche d’émetteur trop tôt, aucun
nouveau code radio ne sera affecté.
Réglage du code fixe 868 MHz8.1
Si vous continuez d’appuyer sur la touche d’émetteur
immédiatement après la réinitialisation de l’appareil,
le code fixe 868 MHz est activé.
La LED clignote lentement au rouge pendant
4 secondes.
La LED clignote rapidement au rouge pendant
2 secondes.
La LED s’allume longuement en rouge.
Tous les codes radio sont réattribués.
REMARQUE :
Si vous relâchez la touche d’émetteur trop tôt,
le système radio BiSecur restera enclenché.
De plus amples informations au sujet du
fonctionnement de l’émetteur avec le code fixe
868 MHz sont disponibles sur le site Internet
www. hoermann.com
Affichage par LED9
Bleu (BU)
Etat Fonction
S’allume 2 s Code radio en cours
d’envoi
Clignote lentement Emetteur en mode
Apprentissage
TR20A088 RE / 02.2012 33
FRANÇAIS
Clignote rapidement
après clignotement lent
Reconnaissance d’un code
radio valide lors de
l’apprentissage
Clignote 4 s lentement
clignote 2 s rapidement,
s’allume longtemps
Réinitialisation de l’appareil
en cours ou achevée
Rouge (RD)
Etat Fonction
Clignote 2 × Pile presque vide
Bleu (BU) et rouge (RD)
Etat Fonction
Clignote en alternance Emetteur en mode
Transmission / Envoi
Nettoyage10
ATTENTION
Endommagement de l’émetteur dû à un
nettoyage incorrect
Le nettoyage de l’émetteur à l’aide de produits de
nettoyage inappropriés peut altérer le boîtier de
l’émetteur ainsi que les touches d’émetteur.
Nettoyez l’émetteur uniquement à l’aide d’un
chiffon propre, doux et humide.
REMARQUE :
En contact avec des produits cosmétiques (par ex.
crème pour les mains), les touches d’émetteur
blanches peuvent se décolorer en cas d’utilisation
régulière sur une période prolongée.
34
TR20A088 RE / 02.2012
FRANÇAIS
Elimination des déchets11
Les appareils électriques et électroniques de
même que les piles ne doivent pas être jetés
dans les ordures ménagères, mais doivent
être remis aux points de collecte prévus à cet
effet.
Données techniques12
Modèle Emetteur HS 1 BiSecur /
Emetteur HS 4 BiSecur
Fréquence 868 MHz
Alimentation électrique 1 × pile 1,5 V, type :
AAA (LR03)
Temp. ambiante admise De –20 °C à +60 °C
Indice de protection IP 20
TR20A088 RE / 02.2012 35
FRANÇAIS
1 Bij deze handleiding .....................................................37
2 Veiligheidsrichtlijnen ....................................................37
2.1 Gebruiksdoel ..................................................................37
2.2 Veiligheidsrichtlijnen voor gebruik van
de handzender ...............................................................38
3 Leveringsomvang .........................................................39
4 Beschrijving van de handzender
HS 1 BiSecur / HS 4 BiSecur ........................................40
5 Inbedrijfstelling .............................................................40
5.1 Batterij in het batterijvak leggen .....................................40
6 Bediening ......................................................................41
7 Aanleren en overmaken / Zenden van een
radiocode ......................................................................42
7.1 Aanleren van een radiocode ..........................................42
7.2 Gemengde werking / BiSecur en vaste
code 868 MHz ................................................................43
8 Resetten van het toestel ..............................................43
8.1 Vaste code 868 MHz instellen ........................................44
9 LED-display ...................................................................44
10 Reiniging .......................................................................45
11 Verwijdering ..................................................................46
12 Technische gegevens ..................................................46
Inhoudsopgave
Doorgeven of kopiëren van dit document, gebruik en mededeling van de inhoud
ervan zijn verboden indien niet uitdrukkelijk toegestaan. Overtredingen
verplichten tot schadevergoeding. Alle rechten voor het inschrijven van een
patent, een gebruiksmodel of een monster voorbehouden. Wijzigingen onder
voorbehoud.
36 TR20A088 RE / 02.2012
NEDERLANDS
Geachte klant,
Wij danken u omdat u gekozen hebt voor een
kwaliteitsproduct van onze firma.
Bij deze handleiding1
Gelieve deze handleiding zorgvuldig en volledig te
lezen: zij bevat belangrijke informatie over dit product.
Neem de opmerkingen in acht en volg in het bijzonder
de veiligheids- en waarschuwingsrichtlijnen op.
Verdere informatie over de omgang met de
handzender vindt u op het internet onder
www. hoermann.com
Bewaar de handleiding zorgvuldig en zorg ervoor dat
deze altijd beschikbaar is en door de gebruiker van
het product kan worden geraadpleegd.
Veiligheidsrichtlijnen2
Gebruiksdoel2.1
De handzender HS 1 BiSecur / HS 4 BiSecur is een
unidirectionele zender voor aandrijvingen en het
toebehoren ervan. Hij kan met de BiSecur radiocode
alsook met de vaste code 868 MHz gebruikt worden.
Andere toepassingswijzen zijn niet toegelaten.
De fabrikant is niet aansprakelijk voor schade, die
door ondoelmatig gebruik of verkeerde bediening
werd veroorzaakt.
TR20A088 RE / 02.2012 37
NEDERLANDS
Veiligheidsrichtlijnen voor gebruik van de 2.2
handzender
WAARSCHUWING
Gevaar voor lichamelijke letsels bij
deurbeweging
Als de handzender bediend wordt, kunnen
personen gekwetst worden door de deurbeweging.
Vergewis u ervan dat de handzenders niet in
kinderhanden terecht komen en alleen door
personen gebruikt worden, die vertrouwd zijn
met de werkwijze van de deurinstallatie met
afstandsbediening!
Bedien de handzender alleen als u de deur ziet
indien deze over slechts één
veiligheidsvoorziening beschikt!
Rijd of loop pas door deuropening van
deurinstallaties met afstandsbediening als de
deur zich in de eindpositie deur-open bevindt!
Blijf nooit in het bewegingsbereik van de deur
staan.
Denk er aan, dat op de handzender
onopzettelijk op een toets kan worden gedrukt
(bv. in de broekzak / handtas) en er hierdoor
een ongewilde deurbeweging kan gebeuren.
VOORZICHTIG
Gevaar voor lichamelijke letsels door ongewilde
deurbeweging
Zie waarschuwingsrichtlijn hoofdstuk
7
38 TR20A088 RE / 02.2012
NEDERLANDS
OPGELET
Belemmering van de werking door omgevings-
invloeden
Bij onachtzaamheid kan de functie belemmerd
worden!
Bescherm de handzender tegen de volgende
invloeden:
rechtstreeks zonlicht (toegelaten •
omgevingstemperatuur: -20 °C tot +60 °C)
vochtigheid•
stof•
OPMERKINGEN:
Als er geen afzonderlijke toegang tot de garage •
is, voer dan elke wijziging of uitbreiding van
radiosystemen binnen de garage uit.
Voer een functietest uit na het programmeren of •
uitbreiden van het radiosysteem.
Gebruik voor de inbedrijfstelling of de uitbreiding •
van het radiosysteem uitsluitend originele
onderdelen.
De plaatselijke omstandigheden kunnen de •
reikwijdte van het radiosysteem beïnvloeden.
Ook mobiele telefoons met GSM 900 toestellen •
kunnen bij gelijktijdig gebruik de reikwijdte van de
afstandsbediening beïnvloeden.
Leveringsomvang3
Handzender HS 1 BiSecur of •
handzender HS 4 BiSecur
1x 1,5 V Batterij, type: AAA (LR03)•
Batterijdeksel•
Bedieningshandleiding•
TR20A088 RE / 02.2012 39
NEDERLANDS
Beschrijving van de handzender 4
HS 1 BiSecur / HS 4 BiSecur
1 LED, bicolor
2 Handzendertoets of handzendertoetsen
3 Batterijdeksel
4 Batterij
Inbedrijfstelling5
Na het inleggen van de batterijen is de handzender
HS 1 BiSecur / HS 4 BiSecur klaar voor gebruik.
Batterij in het batterijvak leggen5.1
40 TR20A088 RE / 02.2012
NEDERLANDS
OPGELET
Vernieling van de handzender door uitlopende
batterij
Batterijen kunnen uitlopen en de handzender
vernielen.
Verwijder de batterij uit de handzender als
deze gedurende een langere periode niet wordt
gebruikt.
Bediening6
OPMERKING:
Wanneer de radiocode van de aangeleerde
handzendertoets tevoren door een andere
handzender werd gekopieerd, moet de
handzendertoets voor het eerste gebruik een tweede
keer worden ingedrukt.
Aan elke handzendertoets is een radiocode
toegewezen. Druk op de handzendertoets, waarvan
u de radiocode wilt gebruiken.
De radiocode wordt verzonden en de LED
licht gedurende 2 seconden blauw op.
OPMERKING:
Als de batterij bijna leeg is, knippert de LED 2x rood
voor het zenden van de radiocode.a.
De batterij
moet binnenkort worden
uitgewisseld.
en er gebeurt geen verzending van de radiocode.b.
De batterij
moet onmiddellijk worden
uitgewisseld.
TR20A088 RE / 02.2012 41
NEDERLANDS
7 Aanleren en overmaken /
Zenden van een radiocode
VOORZICHTIG
Gevaar voor lichamelijke letsels door ongewilde
deurbeweging
Tijdens het leerproces aan het radiosysteem
kunnen er ongewenste bewegingen van de deur
plaatsvinden.
Let erop dat er zich bij het aanleren van het
radiosysteem geen personen of voorwerpen
binnen de bewegingsradius van de deur
bevinden.
Aanleren van een radiocode7.1
Druk op de handzendertoets van handzender 1. A,
waarvan u de radiocode wilt overmaken / zenden
en houd deze ingedrukt.
De radiocode wordt verzonden; de LED licht
gedurende 2 seconden blauw op en dooft dan
uit.
Na 5 seconden knippert de LED afwisselend
rood en blauw, de radiocode wordt verzonden.
Leg er de handzender 2. B, die de radiocode dient
aan te leren, links naast.
42 TR20A088 RE / 02.2012
NEDERLANDS
Druk op de handzendertoets die met de nieuwe 3.
radiocode gecodeerd moet worden en houd deze
ingedrukt.
De LED knippert langzaam blauw.
Als de radiocode herkend wordt knippert de
LED snel blauw.
Na 2 seconden dooft de LED uit.
OPMERKING:
Voor het overmaken / verzenden heeft u 15 seconden
tijd. Als binnen deze tijd de radiocode niet succesvol
overgemaakt / verzonden wordt moet het proces
herhaald worden.
Gemengde werking / BiSecur en vaste 7.2
code 868 MHz
Bij ingestelde BiSecur functie is met de handzender
HS 4 BiSecur een gemengde werking mogelijk; d.w.z.
voorhanden handzenders met vaste code 868 MHz
(grijze handzender met blauwe toetsen of
toestelherkenning bv. HSD2-868) kunnen door de
BiSecur handzender aangeleerd worden.
Resetten van het toestel8
Aan iedere handzendertoets wordt door de volgende
stappen een nieuwe radiocode toegewezen.
Open het batterijdeksel en verwijder de batterij 1.
10 seconden.
Druk op een handzendertoets en houd deze 2.
ingedrukt.
Plaats de batterij en sluit het batterijdeksel.3.
De LED knippert 4 seconden langzaam blauw.
De LED knippert 2 seconden snel blauw.
De LED licht langdurig blauw op.
Laat de handzendertoets los.4.
Alle radiocodes zijn opnieuw toegewezen.
TR20A088 RE / 02.2012 43
NEDERLANDS
OPMERKING:
Als de handzendertoets te vroeg wordt losgelaten
worden er geen nieuwe radiocodes toegewezen.
Vaste code 868 MHz instellen8.1
Als er onmiddelbaar na het toestelreset verder op de
handzendertoets wordt gedrukt, dan wordt de vaste
code 868 MHz geactiveerd.
De LED knippert 4 seconden langzaam rood.
De LED knippert 2 seconden snel rood.
De LED licht langdurig rood op.
Alle radiocodes zijn opnieuw toegewezen.
OPMERKING:
Als de handzendertoets te vroeg wordt losgelaten
blijft BiSecur radiofunctie ingesteld.
Verdere informatie over de omgang met de
handzender met de vaste code 868 MHz vindt u op
het internet onder www.hoermann.com
LED-display9
Blauw (BU)
Toestand Functie
licht gedurende 2 sec op een radiocode wordt
verzonden
knippert langzaam de handzender bevindt
zich in de modus aanleren
knippert snel na
langzaam knipperen
bij het aanleren werd er
een geldige radiocode
herkend
knippert 4 sec langzaam,
knippert 2 sec snel,
licht langdurig op
toestelreset wordt
uitgevoerd of beëindigd
44 TR20A088 RE / 02.2012
NEDERLANDS
Rood (RD)
Toestand Functie
knippert 2x de batterij is bijna leeg
Blauw (BU) en rood (RD)
Toestand Functie
afwisselend knipperen de handzender bevindt
zich in de modus
overgang / zenden
Reiniging10
OPGELET
Beschadiging van de handzender door
verkeerde reiniging
Het reinigen van de handzender met ongeschikte
reinigingsmiddelen kan de kast van de handzender
of de handzendertoetsen aantasten.
Reinig de handzender alleen met een schone,
zachte en vochtige doek.
OPMERKING:
Witte handzendertoetsen kunnen bij regelmatig
gebruik of gedurende een langere periode verkleuren,
wanneer zij in contact komen met cosmetische
producten (bv. handcrème).
TR20A088 RE / 02.2012 45
NEDERLANDS
Verwijdering11
Elektrische en elektronische apparaten
alsook batterijen mogen niet als huisvuil
worden verwijderd, maar moeten in de
daarvoor ingerichte aanneem- en
verzamelpunten worden afgegeven.
Technische gegevens12
Type Handzender HS 1 BiSecur /
Handzender HS 4 BiSecur
Frequentie 868 MHz
Spanningstoevoer 1x 1,5 V Batterij,
type: AAA (LR03)
Toegel.
omgevingstemperatuur -20 °C tot +60 °C
Afdichtingsnorm IP 20
46
TR20A088 RE / 02.2012
NEDERLANDS
1 Informazioni sulle presenti istruzioni .........................48
2 Indicazioni di sicurezza ...............................................48
2.1 Uso a norma ...................................................................48
2.2 Indicazioni di sicurezza per l’uso del telecomando........49
3 Volume di fornitura .......................................................50
4 Descrizione del telecomando
HS 1 BiSecur / HS 4 BiSecur ........................................51
5 Messa in funzione ........................................................51
5.1 Inserimento della batteria ...............................................51
6 Funzionamento .............................................................52
7 Apprendimento e trasmissione / invio di un
codice radio ..................................................................53
7.1 Apprendimento di un codice radio .................................53
7.2 Funzionamento misto / BiSecur e codice
fisso 868 MHz ................................................................54
8 Reset del dispositivo ....................................................54
8.1 Impostare il codice fisso 868 MHz .................................55
9 Indicazione LED............................................................55
10 Pulizia ............................................................................56
11 Smaltimento ..................................................................57
12 Dati tecnici ....................................................................57
Indice
Il trasferimento di dati a terzi e la copia del documento stesso, utilizzando il
contenuto per scopi diversi da quelli preposti, è vietato, salvo diversamente
accordato per iscritto dalla società. Le violazioni comportano il risarcimento dei
danni. Tutti i diritti, riferiti a Certificazioni, già esistenti o in via di applicazione,
sono riservati. La Ditta si riserva la facoltà di apportare modifiche al prodotto.
TR20A088 RE / 02.2012 47
ITALIANO
Gentile cliente,
la ringraziamo di aver scelto un prodotto di qualità di
nostra produzione.
Informazioni sulle presenti 1
istruzioni
Legga attentamente e completamente le istruzioni
che contengono importanti informazioni sul prodotto.
Osservi le istruzioni ed in particolar modo le
indicazioni e le avvertenze di sicurezza.
Per ulteriori informazioni per l’uso del telecomando
consultare il sito Internet: www.hoermann.com
Conservi queste istruzioni con cura e si assicuri che
siano sempre a disposizione e consultabili da parte
dell’utente del prodotto.
Indicazioni di sicurezza2
Uso a norma2.1
Il telecomando HS 1 BiSecur / HS 4 BiSecur è un
trasmettitore unidirezionale per motorizzazioni e
relativi accessori. Può essere utilizzato con il codice
radio BiSecur e con il codice fisso 868 MHz.
Non sono consentiti altri tipi di applicazione. Il
produttore non si assume nessuna responsabilità per
i danni provocati da un uso non a norma o non
corretto.
48 TR20A088 RE / 02.2012
ITALIANO
Indicazioni di sicurezza per l’uso del 2.2
telecomando
AVVERTENZA
Pericolo di lesioni durante il movimento del
portone
L’azionamento del telecomando può provocare
lesioni alle persone a causa del movimento del
portone.
Assicurarsi che i telecomandi siano lontano
dalla portata dei bambini e siano utilizzati solo
da persone istruite sulle modalità di
funzionamento del sistema di chiusura con
comando a distanza.
In presenza di un solo dispositivo di sicurezza,
usare il telecomando solo se il portone è in
vista!
Attraversare i sistemi di chiusura con comando
a distanza solo se il portone si trova in
posizione di finecorsa di Apertura!
Non sostare mai nella zona di manovra del
portone.
Tenere presente che è possibile premere
accidentalmente un tasto sul telecomando
(p. es. tenendolo nella tasca dei pantaloni o in
borsa) e quindi azionare una manovra
indesiderata del portone.
CAUTELA
Pericolo di lesioni a causa della manovra
involontaria del portone
Vedere le indicazioni di avvertenza nel
capitolo 7
TR20A088 RE / 02.2012 49
ITALIANO
ATTENZIONE
Compromissione del funzionamento a causa di
influenze ambientali
L’inosservanza può pregiudicarne il funzionamento!
Proteggere il telecomando dalle seguenti influenze:
Esposizione diretta ai raggi del sole •
(temperatura ambiente consentita:
da -20 °C a +60 °C)
Umidità•
Polvere•
NOTE:
Se non è presente nessun accesso secondario al •
garage effettuare ogni modifica o ampliamento
dei sistemi radio all’interno del garage.
Terminati la programmazione o l’ampliamento del •
sistema radio, verificarne il funzionamento.
Per la messa in funzione o l’ampliamento del •
sistema radio utilizzare esclusivamente pezzi
originali.
Le caratteristiche architettoniche sul posto •
possono eventualmente influire sulla portata del
sistema radio.
Anche l’uso contemporaneo di telefoni cellulari •
GSM 900 può influire sulla portata.
Volume di fornitura3
Telecomando HS 1 BiSecur o •
telecomando HS 4 BiSecur
1x batteria 1,5 V, tipo AAA (LR03)•
Coperchio batteria•
Istruzioni d’uso•
50 TR20A088 RE / 02.2012
ITALIANO
Descrizione del telecomando 4
HS 1 BiSecur / HS 4 BiSecur
1 LED, bicolore
2 Tasto o tasti del telecomando
3 Coperchio batteria
4 Batteria
Messa in funzione5
Dopo l’inserimento della batteria il telecomando
HS 1 BiSecur / HS 4 BiSecur è pronto all’uso.
Inserimento della batteria5.1
TR20A088 RE / 02.2012 51
ITALIANO
ATTENZIONE
Distruzione del telecomando a causa di perdite
della batteria
Le batterie possono avere perdite e causare la
distruzione del telecomando.
Rimuovere la batteria dal telecomando se
questo non viene utilizzato per un periodo di
tempo molto lungo.
Funzionamento6
NOTA:
Se il codice radio del tasto del telecomando appreso
è stato copiato in precedenza da un altro
telecomando, il tasto deve essere premuto una
seconda volta al primo azionamento.
Ad ogni tasto del telecomando è assegnato un codice
radio. Premere il tasto del telecomando il cui codice
radio si intende inviare.
Il codice radio viene inviato e il LED si
accende per 2 secondi di blu.
NOTA:
Se la batteria è quasi esaurita, il LED lampeggia
2 volte di rosso
prima dell’invio del codice radio.a.
La batteria
dovrebbe essere sostituita entro
breve.
Il codice radio non viene inviato.b.
La batteria
deve essere sostituita
immediatamente.
52 TR20A088 RE / 02.2012
ITALIANO
7 Apprendimento e trasmissione /
invio di un codice radio
CAUTELA
Pericolo di lesioni a causa della manovra
involontaria del portone
Durante il processo di apprendimento sul sistema
radio possono verificarsi manovre involontarie del
portone.
Durante l’apprendimento del sistema radio fare
attenzione che persone o oggetti non si trovino
nella zona di manovra del portone.
Apprendimento di un codice radio7.1
Premere il tasto del telecomando 1. A il cui codice
radio si intende trasmettere e tenerlo premuto.
Il codice radio viene inviato; il LED si accende
per 2 secondi di blu e si spegne.
Dopo 5 secondi il LED lampeggia
alternativamente di rosso e blu; il codice radio
viene inviato.
Posizionarvi accanto a sinistra il telecomando 2. B,
che deve apprendere il codice radio.
Premere il tasto del telecomando al quale deve 3.
essere assegnato il nuovo codice radio e tenerlo
premuto.
TR20A088 RE / 02.2012 53
ITALIANO
Il LED lampeggia lentamente di blu.
Se il codice radio viene riconosciuto, il LED
lampeggia rapidamente di blu.
Dopo 2 secondi il LED si spegne.
NOTA:
La trasmissione / l’invio del codice radio deve avvenire
entro 15 secondi. Se in questo lasso di tempo il
codice radio non viene trasmesso / inviato
correttamente, l’operazione deve essere ripetuta.
Funzionamento misto / BiSecur e codice 7.2
fisso 868 MHz
Se è stato impostato il sistema radio BiSecur, con il
telecomando HS 4 BiSecur è possibile un
funzionamento misto; cioè i telecomandi presenti con
codice fisso 868 MHz (telecomandi grigi con tasti blu
o denominazione dispositivo p. es. HSD2-868)
possono essere appresi dal telecomando BiSecur.
Reset del dispositivo8
A ogni tasto del telecomando viene assegnato un
nuovo codice radio attraverso i seguenti passaggi.
Aprire il coperchio della batteria e rimuovere la 1.
batteria per 10 secondi.
Premere un tasto del telecomando e tenerlo 2.
premuto.
Inserire la batteria e chiudere il coperchio della 3.
batteria.
Il LED lampeggia lentamente di blu per
4 secondi.
Il LED lampeggia velocemente di blu per
2 secondi.
Il LED rimane acceso a lungo di blu.
Rilasciare il tasto del telecomando.4.
Tutti i codici radio sono stati riassegnati.
54 TR20A088 RE / 02.2012
ITALIANO
NOTA:
Se il tasto del telecomando viene rilasciato troppo
presto, non vengono assegnati nuovi codici radio.
Impostare il codice fisso 868 MHz8.1
Se subito dopo il reset del dispositivo, si continua a
premere il tasto del telecomando, il codice fisso
868 MHz viene attivato.
Il LED lampeggia lentamente di rosso per
4 secondi.
Il LED lampeggia velocemente di rosso per
2 secondi.
Il LED rimane acceso a lungo di rosso.
Tutti i codici radio sono stati riassegnati.
NOTA:
Se il tasto telecomando viene rilasciato troppo presto,
il codice radio BiSecur rimane impostato.
Per ulteriori informazioni per l’uso del telecomando
con il codice fisso 868 MHz consultare il sito Internet
www.hoermann.com
Indicazione LED9
Blu (BU)
Stato Funzione
Si accende per 2 sec. Viene inviato un codice
radio
Lampeggia lentamente Il telecomando si trova in
modalità Apprendimento
Lampeggia rapidamente
dopo un lento
lampeggiamento
Durante l’apprendimento è
stato riconosciuto
un codice radio valido
TR20A088 RE / 02.2012 55
ITALIANO
Lampeggia lentamente
per 4 sec.,
lampeggia rapidamente
per 2 sec.,
rimane acceso a lungo
Viene effettuato e portato
a termine il reset
del dispositivo
Rosso (RD)
Stato Funzione
Lampeggia 2 volte La batteria è quasi scarica
Blu (BU) e rosso (RD)
Stato Funzione
Lampeggio alternato Il telecomando si trova in
modalità Trasmissione /
Invio
Pulizia10
AVVERTENZA!
Danneggiamento del telecomando a causa di
una pulizia errata
La pulizia del telecomando con detergenti inadatti
può aggredire la custodia e i tasti.
Pulire il telecomando solo con un panno pulito,
morbido e umido.
NOTA:
Usando regolarmente i telecomandi per un periodo di
tempo molto lungo i tasti bianchi possono scolorirsi
se vengono a contatto con prodotti cosmetici (p. es.
crema per le mani).
56
TR20A088 RE / 02.2012
ITALIANO
Smaltimento11
Apparecchi elettrici, elettronici e batterie non
devono essere smaltiti come rifiuti domestici
o non riciclabili, bensì devono essere
consegnati presso i punti di accettazione
e raccolta destinati allo scopo.
Dati tecnici12
Tipo Telecomando HS 1 BiSecur /
telecomando HS 4 BiSecur
Frequenza 868 MHz
Alimentazione elettrica 1x batteria 1,5 V,
tipo AAA (LR03)
Temperatura ambiente
consentita da -20 °C a +60 °C
Tipo di protezione IP 20
TR20A088 RE / 02.2012 57
ITALIANO
1 Acerca de estas instrucciones ....................................59
2 Indicaciones de seguridad ..........................................59
2.1 Utilización conforme a las especificaciones ..................59
2.2 Indicaciones de seguridad para el funcionamiento
del emisor manual ..........................................................60
3 Volumen de suministro ................................................61
4 Descripción del emisor manual
HS 1 BiSecur / HS 4 BiSecur ........................................62
5 Puesta en marcha ........................................................62
5.1 Introducir la pila ..............................................................62
6 Funcionamiento ............................................................63
7 Memorizar y transferir / emitir un código de
radiofrecuencia ............................................................64
7.1 Aprendizaje de un código de radiofrecuencia................64
7.2 Funcionamiento mixto / BiSecur y código fijo
de 868 MHz ....................................................................65
8 Restablecimiento de los ajustes del aparato ............65
8.1 Ajuste del código fijo de 868 MHz .................................66
9 Indicación LED .............................................................67
10 Limpieza ........................................................................68
11 Reciclaje ........................................................................68
12 Datos técnicos..............................................................69
Índice
Quedan prohibidas la divulgación y la reproducción de este documento, así
como su uso indebido y la comunicación del contenido, salvo por autorización
explícita. En caso de infracción se hace responsable de indemnización por
daños y perjuicios. Se reservan todos los derechos, en particular para el caso de
concesión de patente, de modelo de utilidad o industrial. Reservado el derecho
a modificación.
58 TR20A088 RE / 02.2012
ESPAÑOL
Estimada cliente, estimado cliente:
Le agradecemos que se haya decidido por un
producto de calidad de nuestra casa.
Acerca de estas instrucciones1
Lea estas instrucciones íntegra y cuidadosamente,
ya que contienen información importante sobre el
producto. Tenga en cuenta las indicaciones, en
particular las indicaciones de seguridad y de
advertencia.
Encontrará más información sobre el manejo del
emisor manual en Internet: www.hoermann.com
Guarde estas instrucciones cuidadosamente y
asegúrese de que se encuentren siempre en un lugar
accesible para el usuario del producto.
Indicaciones de seguridad2
Utilización conforme a las 2.1
especificaciones
El emisor manual HS 1 BiSecur / HS 4 BiSecur es un
emisor monodireccional para automatismos y sus
complementos. Puede operarse con la
radiofrecuencia BiSecur, así como con el código fijo
de 868 MHz.
No están permitidos otros usos. El fabricante no
asume responsabilidad alguna por daños resultantes
de un uso no apropiado o un manejo incorrecto.
TR20A088 RE / 02.2012 59
ESPAÑOL
Indicaciones de seguridad para el 2.2
funcionamiento del emisor manual
ADVERTENCIA
Peligro de lesiones durante el recorrido
Al usar el emisor manual, existe peligro de lesión
para las personas debido al movimiento de la
puerta.
Asegúrese de que los emisores manuales no
estén al alcance de los niños, y sólo los utilicen
personas instruidas en el funcionamiento de la
instalación de puerta controlada a distancia.
Si la puerta sólo dispone de un dispositivo de
seguridad, el emisor manual sólo debe usarse
si la puerta se encuentra en su campo de
visión.
Atraviese la apertura de la puerta de las
instalaciones de puerta controladas a distancia
únicamente cuando la puerta se encuentre en
la posición final Puerta abierta.
No se quede parado nunca en la zona de
movimiento de la puerta.
Tenga en cuenta que puede accionarse
accidentalmente un pulsador del emisor
manual (p. ej. en el bolsillo del pantalón / en el
bolso), y activarse un recorrido indeseado.
PRECAUCIÓN
Peligro de lesiones por un recorrido de puerta
accidental
Ver indicación de advertencia, capítulo
7
60 TR20A088 RE / 02.2012
ESPAÑOL
ATENCIÓN
Fallos del funcionamiento por influencias del
medio ambiente
Si no se tiene en cuenta, puede perjudicarse el
funcionamiento.
Proteja el emisor manual de las siguientes
influencias:
Exposición directa a la radiación solar •
(temperatura ambiental admisible:
-20 °C a +60 °C)
Humedad•
Polvo•
INDICACIONES:
Si no hay ningún acceso separado al garaje, •
realice todos los cambios o ampliaciones de los
sistemas de radiofrecuencia dentro del garaje.
Después de la programación o la ampliación del •
sistema de radiofrecuencia realice una prueba de
funcionamiento.
Utilice exclusivamente piezas originales para la •
puesta en marcha o la ampliación del sistema de
radiofrecuencia.
Las condiciones locales pueden influir sobre el •
alcance del sistema de radiofrecuencia.
La utilización simultánea de teléfonos móviles •
GSM 900 puede influir sobre el alcance del
mando a distancia.
Volumen de suministro3
Emisor manual HS 1 BiSecur o •
emisor manual HS 4 BiSecur
1 pila de 1,5 V, tipo: AAA (LR03)•
Tapa del compartimento de la pila•
Instrucciones de servicio•
TR20A088 RE / 02.2012 61
ESPAÑOL
Descripción del emisor manual 4
HS 1 BiSecur / HS 4 BiSecur
1 LED, bicolor
2 Pulsador / pulsadores del emisor manual
3 Tapa del compartimento de la pila
4 Pila
Puesta en marcha5
Después de insertar la pila el emisor manual
HS 1 BiSecur / HS 4 BiSecur está operativo.
Introducir la pila5.1
62 TR20A088 RE / 02.2012
ESPAÑOL
ATENCIÓN
Destrucción del emisor manual por derrame de
la pila
Las pilas pueden derramarse y destruir el emisor
manual.
Retire la pila del emisor manual si no se va a
utilizar durante un periodo de tiempo
prolongado.
Funcionamiento6
INDICACIÓN:
Si el código de radiofrecuencia del pulsador del
emisor manual memorizado fue copiado previamente
de otro emisor manual, deberá presionarse dos veces
el pulsador del emisor manual memorizado para la
primera puesta en marcha.
Cada pulsador del emisor manual tiene asignado un
código de radiofrecuencia. Para enviar un código de
radiofrecuencia determinado, presione el respectivo
pulsador del emisor manual.
Se transmite el código de radiofrecuencia y el
LED brilla en azul durante 2 segundos.
INDICACIÓN:
Si la pila está casi agotada, el LED parpadea 2 veces
en rojo
antes de emitir el código de radiofrecuencia.a.
La pila
debería sustituirse en breve.
y no se emite el código de radiofrecuencia.b.
La pila
debe sustituirse inmediatamente.
TR20A088 RE / 02.2012 63
ESPAÑOL
7 Memorizar y transferir / emitir
un código de radiofrecuencia
PRECAUCIÓN
Peligro de lesiones por un recorrido de puerta
accidental
Durante el proceso de aprendizaje del sistema de
radiofrecuencia, pueden producirse recorridos de
puerta no intencionados.
Al memorizar el sistema de radiofrecuencia
preste atención a que no se encuentren
personas u objetos en la zona de movimiento
de la puerta.
Aprendizaje de un código de 7.1
radiofrecuencia
Presione el pulsador del emisor manual 1. A cuyo
código de radiofrecuencia desea transferir, y
manténgalo presionado.
Se transmite el código de radiofrecuencia; el
LED se ilumina en azul durante 2 segundos y,
a continuación, se apaga.
Después de 5 segundos el LED parpadea de
forma intermitente en color rojo y azul; se
emite el código de radiofrecuencia.
64 TR20A088 RE / 02.2012
ESPAÑOL
Coloque el emisor manual 2. B, que debe
memorizar el código de radiofrecuencia, a la
izquierda.
Presione el pulsador del emisor manual al que se 3.
desea asignar el nuevo código de
radiofrecuencia, y manténgalo presionado.
El LED parpadea lento en color azul.
Si se reconoce el código de radiofrecuencia,
el LED parpadea rápido en color azul.
Después de 2 segundos se apaga el LED.
INDICACIÓN:
Para transferir / emitir el código dispone de
15 segundos. Si no se transfiere / emite el código de
radiofrecuencia en este tiempo, deberá repetirse todo
el proceso.
Funcionamiento mixto / BiSecur y código 7.2
fijo de 868 MHz
Si está ajustada la radiofrecuencia BiSecur, con el
emisor manual HS 4 BiSecur es posible un
funcionamiento mixto; es decir, que es posible
memorizar emisores manuales existentes con código
fijo de 868 MHz (emisores manuales grises con
pulsadores azules o con denominación del aparato
como p. ej. HSD2-868) a través del emisor manual
BiSecur.
Restablecimiento de los ajustes 8
del aparato
A cada pulsador del emisor manual se le asigna un
nuevo código de radiofrecuencia siguiendo los
siguientes pasos.
Abra la tapa del compartimento de la pila y retire 1.
la pila durante 10 segundos.
TR20A088 RE / 02.2012 65
ESPAÑOL
Presione un emisor manual y manténgalo 2.
presionado.
Vuelva a insertar la pila y cierre la tapa del 3.
compartimento de la pila.
El LED parpadea lento durante 4 segundos en
color azul.
El LED parpadea rápido durante 2 segundos
en color azul.
El LED brilla prolongadamente en color azul.
Suelte el pulsador del emisor manual.4.
Todos los códigos de radiofrecuencia están
asignados nuevamente.
INDICACIÓN:
Si se suelta antes de tiempo el pulsador del emisor
manual, no se asignan códigos de radiofrecuencia
nuevos.
Ajuste del código fijo de 868 MHz8.1
Si directamente después del restablecimiento de los
ajustes del aparato se sigue presionando el pulsador
del emisor manual, se activa el código fijo de
868 MHz.
El LED parpadea lento durante 4 segundos en
color rojo.
El LED parpadea rápido durante 2 segundos
en color rojo.
El LED brilla prolongadamente en color rojo.
Todos los códigos de radiofrecuencia están
asignados nuevamente.
INDICACIÓN:
Si se suelta el pulsador del emisor manual antes de
tiempo, queda ajustado el sistema de radiofrecuencia
BiSecur.
66 TR20A088 RE / 02.2012
ESPAÑOL
Encontrará más información sobre el funcionamiento
del emisor manual con el código fijo de 868 MHz en
Internet: www.hoermann.com
Indicación LED9
Azul (BU)
Estado Función
Brilla 2 s Se está enviando un
código de radiofrecuencia
Parpadea lento El emisor manual se
encuentra en el modo de
aprendizaje
Parpadea rápido
después del parpadeo
lento
Durante el aprendizaje se
ha reconocido un código
de radiofrecuencia válido
Parpadea lento
durante 4 s,
parpadea rápido
durante 2 s,
brilla prolongadamente
Se realiza o concluye un
reset a los ajustes de
fábrica
Rojo (RD)
Estado Función
Parpadea 2 veces La pila está casi agotada
Azul (BU) y rojo (RD)
Estado Función
Parpadeo intermitente El emisor manual se
encuentra en el modo de
transferencia / envío
TR20A088 RE / 02.2012 67
ESPAÑOL
Limpieza10
ATENCIÓN
Daños en el emisor manual por una limpieza
incorrecta
Si para la limpieza del emisor manual se utilizan
detergentes inapropiados, pueden dañarse la
carcasa y los pulsadores del emisor manual.
Limpie el emisor manual únicamente con un
paño suave limpio y húmedo.
INDICACIÓN:
Los pulsadores del emisor manual blancos pueden
cambiar de color si se usan regularmente durante un
plazo de tiempo largo si entran en contacto con
productos cosméticos (p. ej. una crema para
las manos).
Reciclaje11
Los aparatos eléctricos y electrónicos, así
como las pilas no deben desecharse con
la basura doméstica o con los residuos
restantes, sino deben entregarse en los
puntos de recogida previstos para ello.
68
TR20A088 RE / 02.2012
ESPAÑOL
Datos técnicos12
Tipo Emisor manual HS 1 BiSecur /
emisor manual HS 4 BiSecur
Frecuencia 868 MHz
Alimentación de
tensión
1 pila de 1,5 V, tipo:
AAA (LR03)
Temperatura
ambiente admisible -20 °C hasta +60 °C
Índice de protección IP 20
TR20A088 RE / 02.2012 69
ESPAÑOL
1 Relativamente a estas instruções ..............................71
2 Instruções de segurança .............................................71
2.1 Utilização, segundo as disposições ...............................71
2.2 Instruções de segurança relativas ao
funcionamento do emissor ............................................72
3 Volume de entrega .......................................................73
4 Descrição do emissor HS 1 BiSecur /
HS 4 BiSecur .................................................................74
5 Colocação em funcionamento ....................................74
5.1 Colocar a pilha ...............................................................74
6 Funcionamento .............................................................75
7 Ajuste e memorização / transmissão de
um código de radiofrequência ....................................76
7.1 Ajuste de um código de radiofrequência .......................76
7.2 Funcionamento misto / BiSecur e código
fixo 868 MHz ..................................................................77
8 Reset ao equipamento .................................................77
8.1 Ajustar o código fixo 868 MHz .......................................78
9 Indicação de LED .........................................................79
10 Limpeza .........................................................................80
11 Tratamento ....................................................................80
12 Dados técnicos .............................................................81
Índice
É proibida a divulgação e a reprodução do presente documento, bem como
a utilização e a comunicação do seu teor, desde que não haja autorização
expressa para o efeito. O incumprimento obriga a indemnizações. Reservados
todos os direitos de patentes, modelos registados ou registo de modelos
registados de apresentação. Reservados os direitos a alterações.
70 TR20A088 RE / 02.2012
PORTUGUÊS
Exma. Cliente, Exmo. Cliente
Agradecemos ter optado por um dos nossos
produtos de qualidade.
Relativamente a estas 1
instruções
Leia cuidadosamente e, na íntegra, estas instruções,
que contêm informações importantes acerca do
produto. Cumpra as instruções e respeite sobretudo
as instruções de segurança e de aviso.
Para mais informações relativas ao manuseamento
do emissor, consulte na internet em
www. hoermann. com
Guarde cuidadosamente estas instruções e
providencie, que as mesmas estejam acessíveis
a todo o momento e possam ser consultadas pelo
utilizador do produto.
Instruções de segurança2
Utilização, segundo as disposições2.1
O emissor HS 1 BiSecur / HS 4 BiSecur é um emissor
unidirecional para automatismos e seus acessórios.
O mesmo pode ser operado com a radiofrequência
BiSecur e com o código fixo de 868 MHz.
Não são permitidos outros tipos de aplicação.
O fabricante não se responsabiliza por danos
resultantes de uso ou manuseamento incorretos.
TR20A088 RE / 02.2012 71
PORTUGUÊS
Instruções de segurança relativas ao 2.2
funcionamento do emissor
AVISO
Perigo de lesão durante a deslocação da porta
Se for acionado o emissor, o movimento da porta
pode provocar ferimentos em pessoas.
Certifique-se, que os emissores não estejam
ao alcance das crianças e só sejam utilizados
por pessoas, que estejam devidamente
instruídas sobre o modo de funcionamento do
dispositivo de porta comandado à distância!
De modo geral, terá de acionar o emissor com
contacto visual para a porta, se a mesma só
tiver um dispositivo de segurança!
Transponha as aberturas de porta de
dispositivos acionados à distância somente
quando a porta de garagem se encontrar na
posição final porta aberta!
Nunca permaneça na área de movimento da
porta.
Tenha em atenção que poderá ser acionada
inadvertidamente uma tecla do emissor (p. ex.,
no bolso das calças ou na carteira) e provocar
uma deslocação indesejada da porta.
CUIDADO
Perigo de lesão devido à deslocação
inadvertida da porta
Ver instrução de aviso, capítulo
7
72 TR20A088 RE / 02.2012
PORTUGUÊS
ATENÇÃO
Danificação da função devido às influências
ambientais
Em caso de incumprimento poderá ser danificada
a função!
Proteja o emissor das seguintes influências:
Insolação direta (temperatura ambiente •
admissível: -20 °C a +60 °C)
Humidade•
Poeira•
NOTAS:
Se não existir um acesso separado à garagem, •
realize qualquer alteração ou extensão de
sistemas de radiofrequência dentro da garagem.
Após a programação ou a extensão do sistema •
de radiofrequência, realize um ensaio de funções.
Para a colocação em funcionamento ou extensão •
do sistema de radiofrequência utilize
exclusivamente peças de origem.
As realidades locais podem ter influência •
no alcance do sistema de radiofrequência.
Os telemóveis GSM 900 podem influenciar •
o alcance aquando de uma utilização em
simultâneo.
Volume de entrega3
Emissor HS 1 BiSecur ou emissor HS 4 BiSecur•
1x pilha 1,5 V, tipo: AAA (LR03)•
Tampa da pilha•
Instruções de funcionamento•
TR20A088 RE / 02.2012 73
PORTUGUÊS
Descrição do emissor 4
HS 1 BiSecur / HS 4 BiSecur
1 LED, bicolor
2 Tecla do emissor ou teclas do emissor
3 Tampa da pilha
4 Pilha
Colocação em funcionamento5
Após a colocação da pilha, o emissor HS 1 BiSecur /
HS 4 BiSecur está operacional.
Colocar a pilha5.1
74 TR20A088 RE / 02.2012
PORTUGUÊS
ATENÇÃO
Destruição do emissor, se a pilha vazar
substâncias químicas
As pilhas podem vazar substâncias químicas
e destruir o emissor.
Remova a pilha do emissor, se o mesmo não
for utilizado durante um longo período.
Funcionamento6
NOTA:
Se o código de radiofrequência da tecla do emissor
tiver sido copiado por um outro emissor, a tecla do
emissor tem de ser premida uma segunda vez
aquando do primeiro funcionamento.
A qualquer tecla do emissor está agregado um
código de radiofrequência. Prima a tecla do emissor,
cujo código de radiofrequência deseja transmitir.
O código de radiofrequência é transmitido e o
LED fica iluminado durante 2 segundos a azul.
NOTA:
Quando a pilha estiver quase descarregada, o LED
pisca 2x a vermelho
antes da transmissão do código de a.
radiofrequência.
A pilha
deverá ser substituída em breve.
e não ocorrerá qualquer transmissão do código b.
de radiofrequência.
A pilha
terá de ser substituída de imediato.
TR20A088 RE / 02.2012 75
PORTUGUÊS
7 Ajuste e memorização /
transmissão de um código
de radiofrequência
CUIDADO
Perigo de lesão devido à deslocação
inadvertida da porta
Durante o processo de ajuste no sistema de
radiofrequência podem verificar-se deslocações
inadvertidas da porta.
Aquando do ajuste do sistema de
radiofrequência tenha em atenção, que na área
de movimento da porta não se encontrem
pessoas ou objetos.
Ajuste de um código de radiofrequência7.1
Prima a tecla do emissor 1. A, cujo código de
radiofrequência deseja memorizar e mantenha-a
premida.
O código de radiofrequência é transmitido; o
LED está iluminado durante 2 segundos a azul
e desliga-se.
Após 5 segundos, o LED pisca
alternadamente a vermelho e a azul; o código
de radiofrequência é transmitido.
76 TR20A088 RE / 02.2012
PORTUGUÊS
Coloque o emissor 2. B, cujo código de
radiofrequência deve ser ajustado, do lado
esquerdo.
Prima a tecla do emissor que deverá receber a 3.
atribuição do novo código de radiofrequência
e mantenha-a premida.
O LED pisca lentamente a azul.
Se o código de radiofrequência for
reconhecido, o LED pisca rapidamente a azul.
Após 2 segundos, o LED desliga-se.
NOTA:
Para memorização / transmissão dispõe de
15 segundos. Se, durante este tempo, o código de
radiofrequência não for corretamente memorizado /
transmitido terá de ser repetido o procedimento.
Funcionamento misto / BiSecur e código 7.2
fixo 868 MHz
Aquando de radiofrequência BiSecur ajustada com
o emissor HS 4 BiSecur é possível um funcionamento
misto; isto significa que os emissores existentes com
código fixo 868 MHz (emissores cinzentos com teclas
azuis ou marcação de equipamento p. ex. HSD2-868)
podem ser programados pelo emissor BiSecur.
Reset ao equipamento8
A qualquer tecla do emissor está agregado um novo
código de radiofrequência através dos seguintes
passos.
Abra a tampa do compartimento da pilha e 1.
remova-a durante 10 segundos.
Prima uma tecla do emissor e mantenha-a 2.
premida.
Coloque a pilha e feche a tampa do 3.
compartimento.
TR20A088 RE / 02.2012 77
PORTUGUÊS
O LED pisca lentamente por 4 segundos a
azul.
O LED pisca rapidamente durante 2 segundos
a azul.
O LED permanece iluminado por muito tempo
a azul.
Largue a tecla do emissor.4.
Todos os códigos de radiofrequência são
novamente atribuídos.
NOTA:
Se a tecla do emissor for largada antes de tempo,
não será atribuído qualquer novo código de
radiofrequência.
Ajustar o código fixo 868 MHz8.1
Se, imediatamente após o reset ao equipamento, a
tecla do emissor continuar a ser premida, o código
fixo 868 MHz será ativado.
O LED pisca lentamente durante 4 segundos
a vermelho.
O LED pisca rapidamente durante 2 segundos
a vermelho.
O LED permanece iluminado por um longo
tempo a vermelho.
Todos os códigos de radiofrequência são
novamente atribuídos.
NOTA:
Se a tecla do emissor for largada antes de tempo,
a radiofrequência BiSecur permanece ajustada.
Para mais informações relativas ao funcionamento do
emissor com o código fixo 868 MHz, consulte na
internet em www.hoermann.com
78 TR20A088 RE / 02.2012
PORTUGUÊS
Indicação de LED9
Azul (BU)
Estado Função
Iluminado durante
2 segundos
Está a ser transmitido um
código de radiofrequência
Pisca lentamente O emissor encontra-se no
modo de ajuste
Pisca rapidamente
depois de piscar
lentamente
Aquando do ajuste, foi
reconhecido um código
de radiofrequência válido
Pisca lentamente
durante 4 segundos,
pisca rapidamente
durante 2 segundos,
iluminado
prolongadamente
O reset ao equipamento
está em execução ou está
concluído
Vermelho (RD)
Estado Função
Pisca 2x A pilha está quase
descarregada
Azul (BU) e vermelho (RD)
Estado Função
Pisca alternadamente O emissor encontra-se no
modo de memorização /
transmissão
TR20A088 RE / 02.2012 79
PORTUGUÊS
Limpeza10
ATENÇÃO
Danos no emissor devido a uma limpeza incorreta
A limpeza do emissor com produtos de limpeza
inadequados pode corroer a caixa do emissor, bem
como as suas teclas.
Limpe o emissor apenas com um pano limpo,
suave e húmido.
NOTA:
As teclas brancas do emissor podem descolorar
aquando de uma utilização regular, se entrarem em
contacto com produtos de cosmética (p. ex., creme
para mãos).
Tratamento11
Os equipamentos elétricos e eletrónicos,
bem como as pilhas, não devem ser
depositados como lixo doméstico ou lixo
comum, devem sim ser entregues em pontos
de recolha e entrega.
80
TR20A088 RE / 02.2012
PORTUGUÊS
Dados técnicos12
Modelo Emissor HS 1 BiSecur /
emissor HS 4 BiSecur
Frequência 868 MHz
Alimentação de tensão 1x pilha 1,5 V,
tipo: AAA (LR03)
Temperatura ambiente
permitida -20 °C a +60 °C
Índice de proteção IP 20
TR20A088 RE / 02.2012 81
PORTUGUÊS
82 TR20A088 RE / 02.2011
TR20A088 RE / 02.2011 83
HÖRMANN KG
Verkaufsgesellschaft
Upheider Weg 94-98
D-33803 Steinhagen
www.hoermann.com
TR20A088 RE / 02.2011
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hormann HS 1 BiSecur bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hormann HS 1 BiSecur in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info