Tensioning the Drive Belt
The operator’s toothed belt has been optimally pretensioned at
the factory. During the starting and braking phases of large
doors it can happen that the drive belt hangs out of the profiled
boom for a brief while. This, however, is of no technical disad-
vantage nor does it have a negative effect on the operator’s
function and service life.
ATTENTION: Do not reach into the boom
with the fingers
➜ trap risk!
Maintenance Advice
The garage door operator is maintenance-free. For your own
safety, however, we recommend that you have the door system
checked once a year by a specialist.
Airborne noise emission of the garage door operator: at
a distance of 3 m the equivalent continuous sound pres-
sure level of 70 dB(A-weighted) is not exceeded.
See text section!
Copyright.
No reproduction even in part is allowed without our permission.
All details subject to change.
11
ENGLISH
ATTENTION: Electrical installation on site
must comply with the relevant safety regula-
tions (230/240 V AC, 50/60 Hz). Electrical
connections may only be carried out by a
qualified electrician! External voltage at
connecting terminals 1-7 of the controls will
completely destroy the electronics.
In carrying out the installation work, the applicable regulations
regarding working safety must be complied with. Make sure
that the cable of the operator’s mechanical release cannot get
caught up in the ceiling’s support system or in any other protru-
ding parts of vehicles or the door.
Make sure that no persons or objects are located within the
door’s range of travel.
Initial function checks as well as programming or extending the
remote control should always be carried out from inside the
garage.
ATTENTION: For garages without a second
entrance, an emergency release must be fit-
ted to prevent persons from getting locked
in. This must be ordered separately and its
function checked once a month.
Instructions for Using the Operator
ATTENTION: Do not allow anyone to hang
bodily from the pull cord with knob
Before carrying out any work on the operator, disconnect the
mains plug. Instruct all persons using the door system how to
operate it properly and safely.
Demonstrate and test the safety return
and the mechanical release. Only ever
operate the door provided the door’s
range of travel is located within your field
of vision.
ATTENTION: Keep hand transmitters
out of the reach of children.
Wait until the door has come to a complete halt before entering
the door’s range of travel. Before driving in or out of the garage,
make sure that the door has opened fully.
