This cleaner should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance. Use only
attachments recommended or supplied by Hoover.
WARNING: Electricity can be extremely dangerous. This appliance is double insulated and must
not be earthed. This plug is tted with a 13 amp fuse (UK only).
IMPORTANT: The wires in the mains power lead are coloured in accordance with the
following code:
Blue – Neutral Brown – Live
STATIC ELECTRICITY: Some carpets can cause a small build up of static electricity. Any
static discharge is not hazardous to health.
AFTER USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with the
appliance or its controls. Please supervise the use of the appliance by older children, the
elderly or the infirm.
HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance
we recommend that any servicing or repairs are only carried out by an authorised Hoover
service engineer.
*Certain models only
**Nozzle design may vary according to model
IMPORTANT SAFETY REMINDERS
IT IS IMPORTANT THAT YOU DO NOT:
GETTING TO KNOW YOUR CLEANER
ASSEMBLING YOUR CLEANER
Position the cleaner above you when cleaning the stairs.•
Use your cleaner out of doors or on any wet surface or for wet pick up.•
Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar •
items.
Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this •
may cause risk of fire / explosion.
Run over the supply cord when using your cleaner or remove the plug by pulling on the •
supply cord.
Stand on or wrap the power cord around arms or legs when using the cleaner.•
Use the appliance to clean people or animals.•
Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged •
stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised Hoover
service engineer must replace the supply cord.
Remove all components from the packaging.
Connect the hose to the cleaner main body, ensuring it clips and locks into position. To 1.
release: simply press the two buttons on the hose end and pull [2].
Connect the tube upper end to the handle. 2. [3].
Connect the tube lower end to the carpet and oor nozzle 3. [4].
USING YOUR CLEANER
1
GB
Main CleanerA.
Cord Rewind PedalB.
Carry HandleC.
Exhaust Filter CoverD.
On/O PedalE.
Telescopic Tube*F.
Telescopic Tube Release Button*G.
Standard Tube*H.
Variable Power Control Roller*I.
Bag Check IndicatorJ.
Bag Door Release LatchK.
Suction Regulator*L.
HandleM.
Carpet and Floor Nozzle**N.
Surface selector PedalO.
HoseP.
Pre motor lterQ.
Exhaust lterR.
2 in 1 ToolS.
Pet Hair Remover Mini Turbo Nozzle*T.
Allergen Remover Mini Turbo Nozzle*U.
Grand Turbo Nozzle*V.
Hard Floor Caresse Nozzle*W.
Extract power cord and plug it into the power supply. Do not pull the cord beyond the red 1.
marker [5].
Adjust the length of the telescopic tube* by moving the telescopic release button* up and 2.
raise or lower the handle to the most comfortable cleaning position [6].
Carpet & Floor Nozzle. Press the pedal on the nozzle 3. [7] to select the ideal cleaning mode
for the oor type.
Hard Floor: The brushes are lowered to protect the oor
Carpet: With lifted brushes for the deepest clean
Switch the cleaner on by pressing the On/O pedal on the cleaner main body. 4. [8]
Adjust the power level by rotating the variable power control roller*. 5. [9]
Adjust the suction regulator* to the desired level. 6. [10].
Switch o at the end of use by pressing the On/O pedal. Unplug and press the cord rewind 7.
pedal to wind the power cord back into the cleaner [11].
Parking and Storage - The tube can be parked for temporary storage while in use, or in the 8.
storage position when not in use [12].
