705451

Hoover ATDH11A2TKERXM-S Handleiding

80
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
NL
7. BEDIENING EN
INDICATORLAMPJES
7
6
5
4
3
2
1
BD
E
F
A
C
A - Programmakeuzeknop - Door de knop in
beide richtingen te draaien, is het mogelijk om
het gewenste droogprogramma te kiezen. Draai
de knop naar OFF om de keuzes te annuleren of
om de droger uit te schakelen.
B - Display -
De display toont de resterende
droogtijd, uitgestelde tijd in het geval van
een uitgestelde startkeuze en andere
meldingsinstellingen.
C - Knoppen -
1 Start/Pauze-knop
Om het geselecteerde programma te starten
en/of het te pauzeren.
2. Knop Uitgestelde start
Om de start van het programma uit te stellen met
1 tot 24 uur met stappen van 1 uur. Het gese-
lecteerde startuitstel verschijnt op de display.
Nadat op de knop START is gedrukt, vermindert
de getoonde tijd uur na uur.
Openen van de deur van de droger met een
startuitstel ingesteld, druk na het sluiten van de
deur opnieuw op start om het tellen te hervatten.
3. Knop Droogselectie
Om het gewenste droogniveau in te stellen tot 5
minuten na het starten van de cyclus:
Strijkdroog: Dit laat de kleding lichtjes nat
om het strijken te vergemakkelijken.
Kapstokdroog: Om kleding klaar te krijgen
om op de kapstok te hangen.
Kastdroog: Voor wasgoed dat direct in de
kast gelegd kan worden.
Extra-droog: Om kleding volledig droog te
krijgen, ideaal voor een volle lading.
Dit toestel is uitgerust met de functie Droogbeheer.
In automatische cycli wordt elk niveau van
tussentijds drogen voorafgaand aan het bereiken
van het geselecteerde droogniveau, aangegeven
door het
knipperen van het indicatielampje dat
overeenkomt met het bereikte droogniveau. In
het geval van incompatibiliteit, knipperen alle
LED’s drie keer snel.
4. Knop Snel / Tijdcyclus-selectie
Bij sommige automatische programma's is het
mogelijk om over te schakelen naar het program-
ma SNEL, tot 3 minuten na de start van de cyclus.
Bij elke druk verhoogt de tijd (30-45-59 minuten).
Om de automatische droogfunctie na deze selectie
opnieuw in te stellen, moet de droger uitgescha-
keld worden. In het geval van incompatibiliteit,
knipperen alle LED’s drie keer snel.
Het is mogelijk om een cyclus over te schakelen
van automatisch naar geprogrammeerd, tot
3 minuten na de start van de cyclus.
Bij elke druk verhoogt de tijd in stappen van
10
minuten. Na deze selectie moet de droger
uitgeschakeld worden om de automatische
droogfunctie opnieuw in te stellen. In het geval
van incompatibiliteit, knipperen alle LED’s drie
keer snel.
5. Antikreuk
Met deze optie kan een antikreukbeweging van
de trommel vóór de cyclus geactiveerd worden in
het geval van activering van het uitstel en aan het
einde van de droogcyclus. Deze antikreukbe-
weging wordt elke 10 minuten geactiveerd, tot
6 uur na het einde van de droogcyclus. Om de
bewegingen te stoppen,
zet de knop op OFF.
Nuttig wanneer het niet mogelijk is om het
wasgoed onmiddellijk te verwijderen.
6. Geheugen
Met deze optie kunt u de opties die in een cyclus
ingesteld zijn in het geheugen bewaren.
GEHEUGEN: wanneer de cyclus bezig is, druk
gedurende 3 seconden op de knop “geheugen”.
Het controlelampje “geheugen” knippert drie keer
en bewaart dan de ingestelde opties verbonden
aan de geselecteerde cyclus.
RECALL: na de selectie van de cyclus, druk op
de knop “geheugen” om de opgeslagen opties
(niet de cyclus) terug op te roepen.
7. Toetsvergrendeling
Met deze functie kunnen ongewenste veranderin-
gen van ingestelde opties tijdens de droogfase
geblokkeerd worden.
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
Si pulsas esta tecla, es posible reducir la
velocidad máxima, y si lo deseas, puedes
cancelar el ciclo de centrifugado.
velocidad de giro cancelada.
Si la etiqueta no proporciona información
específica, significa que se puede usar el
centrifugado máximo previsto por el
programa.
Para reactivar el ciclo de centrifugado,
pulsa la tecla hasta alcanzar la velocidad
de centrifugado deseada.
Es posible modificar la velocidad de
centrifugado sin detener la lavadora.
Esta opción le permite cambiar la
temperatura de los ciclos de lavado.
lavado en frío.
No es posible elevar la temperatura por
encima del máximo permitido para cada
programa, con el fin de proteger los
tejidos.
Esta opción le permite pre-programar el
ciclo de lavado para iniciarlo con una
posterioridad de hasta 24 horas.
Para diferir el inicio del ciclo:
- Introduzca el programa deseado.
- Pulse el botón una vez para activarlo
(h00 aparece en la pantalla) y luego
pulse de nuevo para fijar un intervalo de
1 hora (h01 aparece en la pantalla). El
retardo preestablecido aumenta en 1
hora cada vez que se pulsa el botón,
hasta que aparezca h24 en la pantalla,
y en ese momento, al pulsar el botón de
nuevo, se restablecerá el inicio diferido
a cero
-
Confirme pulsando la tecla INICIO/PAUSA
(
la luz en la pantalla comienza a
parpadear). La cuenta atrás comienza y
cuando termina el programa se iniciará
automáticamente.
Es posible cancelar el inicio diferido
girando el selector de programas a la
posición APAGADO.
Si hay alguna interrupción en el
suministro de energía mientras la
lavadora está en funcionamiento, una
memoria especial almacena el programa
seleccionado y, cuando se restablezca la
energía, continúa donde lo dejó.
Las opciones y funciones se debe
seleccionar antes de pulsar la tecla
INICIO/PAUSA.
Si se selecciona una opción que no es
compatible con el programa elegido
entonces el indicador opción parpadea
primero y luego se apaga.
Tecla SELECCIÓN CENTRIFUGADO
Para evitar dañar los tejidos, no es
posible aumentar la velocidad por
encima del máximo permitido para
cada programa.
Una cantidad excesiva de detergente
puede provocar un exceso de
espuma. Si el electrodoméstico
detecta la presencia de una cantidad
excesiva de espuma, puede descartar
la fase de centrifugado, o extender la
duración del programa y aumentar el
consumo de agua.
La lavadora está equipada con un
dispositivo electrónico que descarta el
ciclo de centrifugado si la carga está
desequilibrada. Esto reduce el ruido y
la vibración en la lavadora, y prolonga
la vida de la lavadora.
Tecla SELECCIÓN TEMPERATURA
Tecla INICIO DIFERIDO
80
… 80 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hoover ATDH11A2TKERXM-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hoover ATDH11A2TKERXM-S in de taal/talen: Duits als bijlage per email.

De handleiding is 28,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info