32759
20
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
Operating Manual
Mode d’emploi
Manual de Uso
VisionPRO
®
IAQ
Total Home Comfort System
69-1815EFS-1
Read and save these instructions.
Need Help?
For assistance with this product please visit http://yourhome.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502
® U.S. Registered Trademark.
US Patent No. 6,208,263; 6,373,376; 6,448,901; 6,926,076;
D509151; H25192; H25193 and other patents pending.
Copyright © 2006 Honeywell International Inc. All rights reserved.
BE CAREFUL! Never use sharp instruments, such as a pencil
or pen, to press touchscreen keys. To prevent damage to the
thermostat, always press keys with your fingertip.
VisionPRO
®
IAQ
1
About your new thermostat
Programming at a glance ..................... 2
Quick reference to controls .................. 3
Quick reference to status display ........ 4
Programming & Operation
Clock setting.......................................... 5
Fan setting ............................................. 6
System setting ....................................... 7
Energy Star settings .............................. 8
Using program schedules ..................... 9
Program schedule overrides .............. 10
Vacation hold ....................................... 12
Special features ................................... 13
Screen lock .......................................... 14
Screen cleaning ................................... 15
Optional remote sensors .................... 16
Humidity control .................................. 17
Ventilation control................................ 19
Appendices
Advanced functions ............................ 20
In case of difficulty .............................. 27
Limited warranty .................................. 29
This thermostat is ready to go!
Your new thermostat is pre-
programmed and ready to go.
See page 2 to check settings.
Table of contents
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not oper-
ate cooling system when outdoor
temperature is below 50˚F (10˚C).
Operating Manual
2
About your new thermostat
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock ........................................................................................................See page 5
2. Select fan setting: Preset to Auto ..............................................................See page 6
3. Select system setting: Preset to Heat ......................................................See page 7
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ........................................................................ See pages 8-11
5. Set humification, dehumidification
& ventilation controls, if applicable ............................................... See pages 17-19
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 10-11).
VisionPRO
®
IAQ
3
Press day(s) to set program schedule (see page 9)
Press to select fan
operation (see page 6)
Press to select system
type (see page 7)
Press to set program
schedule (see page 9)
Press to adjust
temperature settings
(see pages 9-11)
Press for more options
Press to override
program schedule
(see pages 10-11)
Press to set clock
(see page 5)
Press to lock keypad for 30
seconds to clean screen
(see page 14)
SCHED HOLD CLOCK SCREEN MORE
MON
TUE WED THU FRI SAT SUN
AM
FAN
AUTO
SYSTEM
HEAT
Following
Schedule
Inside
Set To
OK TO PICK MULTIPLE DAYS
70
6:01
70
Quick reference to controls
Operating Manual
4
Current inside temperature Current day of week Temperature setting
Program schedule on
(does not display
when off)
Adaptive Intelligent
Recovery in effect
(see page 13)
Inside humidity (If
an outdoor sensor is
installed, the outdoor
temperature is shown
instead of the humidity
level. Press MORE to dis-
play the humidity level.)
Fan setting
Other display messages:
Cool On: Cooling system is activated
Heat On: Heating system is activated
Aux Heat On: Auxiliary heating system is activated
Wait: Compressor protection activated (see page 13)
Screen Locked: See page 26 to unlock
SCHED HOLD CLOCK SCREEN MORE
WED
AM
FAN
AUTO
SYSTEM
HEAT
Following
Schedule
Inside
Set To
Recovery
Humidity
70
6:01
70
55
Quick reference to status display
System setting
Current time
VisionPRO
®
IAQ
5
To set the current time display, press CLOCK,
then press s or t to adjust the time. Press
and hold s or t to advance the time more
quickly.
Press DONE to save & exit (or press CANCEL to
exit without changing the time).
Note: The real-time clock should never require
adjustment since it automatically updates for
daylight savings time, and stores all date/time
information.
Note: To change the current week day display, see
page 21.
Press CLOCK
Adjust time, then press DONE
SCHED HOLD CLOCK SCREEN MORE
WED
AM
FAN
AUTO
Inside
Set To
70
6:01
70
DONE CANCEL
WED
AM
FAN
AUTO
Inside
Set To
70
6:02
70
Clock setting
Operating Manual
6
Press FAN to select fan operation:
On: Fan is always on.
Auto: Fan runs only when the heating or
cooling system is on.
Circ: Fan runs randomly, about 35% of
the time. Use this setting for improved
air circulation, or for more efficient air
cleaning, if you do not want the fan to run
all the time.
You can press FAN to override the fan settings
you’ve programmed for different time periods
(see page 9). If you select On or Circ, the
setting you select will remain active until you
press FAN again to select Auto, and return to
the fan schedule.
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.
Press FAN
SCHED HOLD CLOCK SCREEN MORE
WED
AM
SYSTEM
HEAT
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
Fan setting
VisionPRO
®
IAQ
7
Press SYSTEM
SCHED HOLD CLOCK SCREEN MORE
WED
AM
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
SYSTEM
HEAT
Press the SYSTEM button to select:
Heat: Thermostat controls only the
heating system.
Cool: Thermostat controls only the
cooling system.
Off: Heating and cooling systems are off.
Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.
Em Heat (only for heat pumps with
auxiliary heat): Thermostat controls
Auxiliary Heat. Compressor is not used.
System setting
Operating Manual
8
It’s easy to program your system for maximum energy savings. You can program four
time periods each day, with different settings for each day.
This thermostat is pre-set to use EnergyStar
®
program settings. We recommend these
settings, since they can reduce your heating/cooling expenses by as much as 33%.
(See next page to adjust times and temperatures of each time period.)
Wake
(6:00 am)
Leave
(8:00 am)
Return
(6:00 pm)
Sleep
(10:00 pm)
Cool (Mon-Fri)Heat (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)
70
°
78
°
70
°
78
°
62
°
85
°
62
°
[Or cancel period]
85
°
[Or cancel period]
70
°
78
°
70
°
[Or cancel period]
78
°
[Or cancel period]
62
°
82
°
62
°
82
°
EnergyStar
®
settings for maximum cost savings
VisionPRO
®
IAQ
9
To adjust program schedules
1. Press SCHED, then EDIT.
2. Press day buttons (MON-SUN) to select
day(s).
3. Press s or t to set your Wake time for
selected day(s).
4. Press s or t to set Heat and Cool
temperature for this time period.
5. Press other time periods (LEAVE, RETURN,
SLEEP) to set time and temperatures for
each.
6. Press DONE to save & exit (or press CANCEL
to exit without saving changes).
Note: You can press CANCEL PERIOD to eliminate any
unwanted time period.
Note: Press FAN to customize fan settings for any
time period (see page 6).
Set time for program
period to start
Press EDIT
Select day(s) Set heat/cool levels
SCHED HOLD CLOCK SCREEN MORE
WED
AM
Following
Schedule
Inside
Set To
70
6:00
70
FAN
AUTO
DONE WAKE LEAVE RETURN SLEEPEDIT CANCEL
WED
AM
Following
Schedule
Inside
Set To
70
6:00
70
FAN
AUTO
Press SCHED
DONE WAKE LEAVE RETURN SLEEP CANCEL
MON
TUE WED THU FRI SAT SUN
AM
CANCEL
PERIOD
HEAT
COOL
OK TO PICK MULTIPLE DAYS
70
6:00
78
FAN
AUTO
Operating Manual
10
Program schedule override (temporary)
Press s or t to immediately adjust the
temperature. This will temporarily override the
temperature setting for the current time period.
The new temperature will be maintained only
until the time you set. When the timer expires,
the program schedule will resume and set the
temperature to the level you’ve programmed for
the current time period.
To cancel the temporary setting at any time,
press CANCEL (or SCHED). The program schedule
will resume.
Adjust temperature
Press to set timer
Press CANCEL (or SCHED) to
resume program schedule
VisionPRO
®
IAQ
11
Program schedule override (permanent)
Press HOLD Adjust temperature
Press HOLD to permanently adjust the
temperature. This will turn off the program
schedule.
Whatever temperature you set will be
maintained 24 hours a day until you manually
change it or press CANCEL (or SCHED) to cancel
“Hold” and resume the program schedule.
Press CANCEL (or SCHED) to
resume program schedule
Operating Manual
12
Vacation hold
This feature can suspend the program sched-
ule for extended periods of time.
Press s or t to set the temperature you want,
then press s or t to set the time of day you
want the schedule to resume when you return.
Press HOLD twice, then press s or t to select
the number of days.
Whatever temperature you set will be main-
tained 24 hours a day for the number of days
you select. After this number of days have
elapsed, the previously programmed schedule
will resume at the time you set.
If you return earlier than expected, press
CANCEL (or SCHED) to cancel “Hold” and resume
the program schedule.
1 Set temperature
2 Press to set time for
schedule to resume
3 Press HOLD twice
4 Press to select number of days
SCHED HOLD CLOCK SCREEN MORE
CANCEL
WED
PM
Inside
Hold Temperature
Until
Set To
55
6:00
70
FAN
AUTO
SYSTEM
HEAT
SCHED HOLD CLOCK SCREEN MORE
CANCEL
WED
Inside
DAYS
Hold Temperature
Until
Set To
55
14
70
FAN
AUTO
SYSTEM
HEAT
VisionPRO
®
IAQ
13
Special features
Auto Changeover: When set to Auto, the thermostat automatically selects heating or
cooling depending on the indoor temperature.
Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how
long the furnace and air conditioner take to reach programmed temperature settings,
so the temperature is reached at the time you set.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.
Flashing message: Reminder to replace filter or UV lamp. After replacement, press
RESET to reactivate the alert timer.
Southern Away Dehumidification: Your system may be programmed to control
humidity while your house is vacant during the humid season. Before you leave the
house, press the HOLD button three times to activate this feature. This will control
temperature and humidity to help protect your house and possessions while you are
away. (If this feature does not work, contact your installer.)
Operating Manual
14
Screen lock
To prevent tampering, the screen can be par-
tially or fully locked.
When partially locked, the screen displays
SCREEN LOCKED for several seconds if a locked
key is pressed.
When the screen is fully locked, no keys
function. To lock or unlock the screen, see
advanced function 0670 on page 26.
See advanced function
0670 (page 26) for
screen lock options
SCHED HOLD CLOCK SCREEN MORE
WED
PM
Following
Schedule
Inside
Set To
SCREEN LOCKED
70
6:00
70
43
FAN
AUTO
SYSTEM
HEAT
VisionPRO
®
IAQ
15
Screen cleaning
Press SCREEN to lock the screen for cleaning.
The screen will remain locked for 30 seconds
so you can clean the screen without changing
any settings.
After 30 seconds, press DONE to resume normal
operation, or press SCREEN again if you require
more time for cleaning.
Note: Do not spray any liquid directly on the
thermostat. Spray liquids onto a cloth, then use
the damp cloth to clean the screen. Use water or
household glass cleaner. Avoid abrasive cleansers.
Press SCREEN
Screen lock timer (30 seconds)
SCHED HOLD CLOCK SCREEN MORE
WED
PM
Following
Schedule
Inside
Set To
SCREEN LOCKED
70
6:00
70
FAN
AUTO
SCHED HOLD CLOCK SCREEN MORE
OK TO
CLEAN
SCREEN
30
Operating Manual
16
Optional remote sensors
If an outdoor sensor is installed, the current
outdoor temperature is displayed.
If an indoor remote sensor is installed, the dis-
play shows the indoor temperature at the loca-
tion of the sensor.
If more than one indoor sensor is installed, the
display shows an average of temperature read-
ings from all sensors or an average between
the thermostat and the sensor(s).
Inside Outside
temperature temperature
SCHED HOLD CLOCK SCREEN MORE
WED
AM
Following
Schedule
Inside
Outside
Set To
70
6:01
70
43
FAN
AUTO
SYSTEM
HEAT
VisionPRO
®
IAQ
17
Humidification control
Press MORE until the humidifier screen is dis-
played, then press s or t to set the humidity
and Frost Control level.
When using Frost Protection, if frost/conden-
sation appears on windows, lower the frost
setting. Wait at least 1 day before adjusting the
frost level again. Once frost no longer appears,
the thermostat will control humidity to the
maximum level without frosting or fogging win-
dows and without further adjustment.
Press DONE to save and exit, or press CANCEL to
exit without saving changes.
Note: If you do not have an outdoor temperature
sensor, the Frost Control level will not be displayed.
Set Frost Control & humidity level
Press to save & exit
DONE CANCEL
DEHUMIDIFIER
Inside
FROST
5
32
55
Operating Manual
18
Dehumidification control
Press MORE until the dehumidifier screen is dis-
played, then press s or t to set the desired
humidity level and operation (Auto or Off).
If installed to control a dehumidifier, the ther-
mostat can activate it as needed to reduce
humidity.
If you don’t have a dehumidifier, the thermostat
activates the air conditioner to reduce humidity
(may cool as much as 3°F lower than your tem-
perature setting).
Press DONE to save and exit, or press CANCEL to
exit without saving changes.
Press to select
Auto or Off
Press to save & exit
Note: Auto/Off only present
when using a whole house
dehumidifier (not present when
dehumidifying with A/C).
DONE CANCEL
DEHUMIDIFIER
Inside
AUTO
73
55
Press to set
desired humidity
VisionPRO
®
IAQ
19
Ventilation control
You can ventilate your home at any time:
Press MORE until the ventilation screen is dis-
played, then press s or t to set the ventila-
tion timer. You can set the timer to ventilate
from 20 to 180 minutes, in 20-minute incre-
ments. To turn off the ventilator, select 0.
Press DONE to save and exit, or press CANCEL to
exit without saving changes.
If programmed for auto-ventilation by the
installer, the thermostat will ventilate your
home as needed.
Auto/Off will turn off/on the automatic ventila-
tion only. Ventilation can still be requested by
using the timer when set to Off.
Press to set ventilation timer
Press to save & exit
DONE CANCEL
VENT
Minutes
AUTO
40
Operating Manual
20
Advanced functions
2 Press and hold
blank center key
until the display
changes.
3 Change settings as
required (see pages
21-26).
4 Press DONE to exit &
save changes.
1 Press SYSTEM.
Press s/t to
select function
Function Setting
Press s/t to
change setting
SCHED HOLD SCREEN MORE
TUE
AM
Following
Schedule
Inside
Outside
Set To
70
6:01
70
43
FAN
AUTO
SYSTEM
HEAT
DONE
TUE
Inside
Set To
70
0120
70
20
FAN
AUTO
DONE CANCEL
TUE
AM
Inside
Set To
70
6:01
70
FAN
AUTO
SYSTEM
HEAT
VisionPRO
®
IAQ
21
Advanced functions
Year setting (first two digits)
Function
0120
Press s/t to change the first two digits of the year:
Options: 20 = Year 20xx
21 = Year 21xx
Year setting (second two digits)
Function
0130
Press s/t to change the last two digits of the year:
Options: 01 - 99 (i.e., 2001 - 2099)
Month setting
Function
0140
Press s/t to change the current month:
Options: 01 - 12 (i.e., January - December)
Date setting
Function
0150
Press s/t to change the current date:
Options: 01 - 31
Operating Manual
22
Advanced functions
Program schedule on/off
Function
0160
Press s/t to turn the program schedule on or off:
Options: 0 Program schedule is off. Thermostat is non-programmable.
4 Program schedule is on (7-day programmable).
Restore Energy Star
®
schedule
Function
0165
Press s/t to restore default Energy Star settings:
Options: 0 No change
1 Restore factory default Energy Star settings
Backlight
Function
0280
Press s/t to select how the screen is lighted:
Options: 0 Light on for approx. 45 seconds after keypress
1 Light always on low intensity, full bright after keypress
VisionPRO
®
IAQ
23
Advanced functions
Temperature format (°F/°C)
Function
0320
Press s/t to set the temperature display format:
Options: 0 Fahrenheit
1 Celsius
Daylight savings time on/off
Function
0330
The thermostat is pre-programmed to automatically adjust to daylight savings time.
Press s/t to select an option:
Options: 0 Off: No adjustment for daylight savings time
1 On: Auto-change to daylight savings time (through 2006, and for areas that do
not use the new 2007 DST calendar)
2 On: Auto-change to daylight savings time (2007 and beyond, for areas that use
the new 2007 DST calendar)
Ventilation control
Function
0400
Press s/t to set ventilation control:
Options: 0 No ventilation
1 Ventilation allowed at any time
2 Ventilation allowed at any time except during Sleep period
Operating Manual
24
Advanced functions
Furnace filter change reminder
Function
0500
This feature displays an alert to remind you to change the furnace filter.
Press s/t to set the desired reminder interval:
Options: 0 Off
1 10-day run time
2 30-day run time
3 60-day run time
4 90-day run time
5 120-day run time
6 180-day run time
7 270-day run time
8 365-day run time
9 30 calender days
10 60 calender days
11 90 calender days
12 120 calender days
13 180 calender days
14 365 calender days
E Auto Alert (requires optional equipment)
Note: Press RESET
to cancel the alert
VisionPRO
®
IAQ
25
Advanced functions
Humidifier pad change reminder
Function
0510
This feature displays an alert to remind you to change the humidifier pad.
Press s/t to set the desired interval:
Options: 0 Off (no reminder to change humidifier pad)
1 30-day run time, 90 calendar days **
2 60-day run time, 180 calendar days **
3 90-day run time, 365 calendar days ** **interval depends on humidifier
E Auto Alert (requires optional equipment)
UV lamp change reminder
Function
0520
This feature displays an alert to remind you to change the ultraviolet lamp.
Press s/t to set the desired interval:
Options: 0 Off (no reminder to change UV lamp)
1 Reminder after 1 year
2 Reminder after 2 years
E Auto Alert (requires optional equipment)
Adaptive Intelligent Recovery
Function
0530
Press s/t to turn this feature on or off (see page 13):
Options: 0 Off
1 On
Note: Press RESET
to cancel the alert
Note: Press RESET
to cancel the alert
Operating Manual
26
Advanced functions
Program schedule periods
Function
0540
Press s/t to set the number of program periods:
Options: 2 Two program periods (Wake, Sleep)
4 Four program periods (Wake, Leave, Return, Sleep)
Clock format
Function
0640
Press s/t to set the clock display format:
Options: 12 12-hour clock (i.e., “3:30 pm”)
24 24-hour clock (i.e., “15:30”)
Screen lock
Function
0670
Press s/t to choose a screen lock setting (see page 14):
Options: 0 Screen is unlocked (fully functional)
1 All functions locked except temperature controls and CANCEL key
2 Screen is fully locked
VisionPRO
®
IAQ
27
If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is blank Check circuit breaker and reset if necessary.
Make sure power switch at heating & cooling system is on.
Make sure furnace door is closed securely.
No response to
key presses (or
temperature will
not change)
Check to make sure the thermostat is not locked (see page 26).
Make sure heating and cooling temperatures are set to acceptable ranges:
Heat: 40° to 90°F (4.5° to 32°C)
Cool: 50° to 99°F (10° to 37°C)
Backlight is dim A dim display is normal. See Advanced function 0280 on page 22 for
backlight options.
In case of difficulty
Operating Manual
28
Heating or
cooling system
does not respond
Press SYSTEM to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
Press SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
Check circuit breaker and reset if necessary.
Make sure power switch at heating & cooling system is on.
Make sure furnace door is closed securely.
If “Wait” is displayed, the compressor protection timer is on. Wait
5 minutes for the system to restart safely, without damaging the
compressor (see page 13).
“Err” appears
on screen
Contact your contractor.
Your equipment may
need service or repair.
In case of difficulty
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible compres-
sor damage, do not operate cooling sys-
tem when outdoor temperature is below
50˚F (10˚C).
VisionPRO
®
IAQ
29
5-year limited warranty
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use
and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period
the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or
(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be
returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422,
or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the
defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.
Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL
NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER
FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so
this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY
IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden
Valley, MN 55422 or call 1-800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35
Dynamic Drive, Toronto, Ontario M1V4Z9.
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://yourhome.honeywell.com
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Toronto, Ontario M1V 4Z9
® U.S. Registered Trademark.
© 2006 Honeywell International Inc.
US Patent No. 6,208,263; 6,373,376; 6,448,901; 6,926,076;
7,044,397; D509151; H25192; H25193 and other patents pending
69-1815EFS-1 Rev. M.S. 10-06
Automation and Control Systems
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
Mode demploi
VisionPRO
®
IAQ
Total Home Comfort System
69-1815EFS-1
Lisez et sauvez ces instructions.
Vous faut-il de l’aide ?
Pour obtenir de l’assistance concernant ce produit, visitez http://yourhome.honeywell.com
ou appelez gratuitement l’assistance client d’Honeywell au 1-800-468-1502
® U.S. Marque déposée
Brevets US N0. 6,208,263; 6,373,376; 6,448,901; 6,926,076;
D509151; H25192; H25193 et autres brevets en instance.
Copyright © 2006 Honeywell International Inc. Tous droits réservés
ATTENTION ! N’appuyez jamais sur les touches d’un écran
tactile avec un instrument pointu tel qu’un stylo ou un crayon.
Pour empêcher tout dommage au thermostat, appuyez
toujours sur les touches du bout du doigt.
VisionPRO
®
IAQ
33
Table des matières
À propos de votre nouveau thermostat
La programmation en bref ....................... 34
Aide-mémoire sur les commandes ......... 35
Aide-mémoire sur l’affichage .................. 36
Programmation et fonctionnement
Réglage de l’horloge ................................37
Fonctionnement de la ventilation ............ 38
Mode de fonctionnement ........................ 39
Arrangements de Energy Star ................. 40
Utilisation de la programmation ..............41
Annulation de la programmation .............42
Suspension vacances .............................. 44
Fonctions spéciales .................................45
Verrouillage de l’écran .............................46
Nettoyage de l’écran ...............................47
Capteurs à distance en option ................ 48
Commande d’humidité ............................49
Commande de ventilation ....................... 51
Annexes
Fonctions évoluées .................................. 52
En cas de difficultés ................................ 59
Garantie limitée ........................................61
Ce thermostat est prêt à
fonctionner
Votre nouveau thermostat est
préprogram et prêt à fonctionner. La
configuration se trouve à la page 34.
ATTENTION : RISQUE D’ENDOM-
MAGER L’ÉQUIPEMENT. Pour éviter
tout risque de dommage au compres-
seur, ne pas faire fonctionner la clima-
tisation lorsque la température extéri-
eure est inférieure à 1 C (50° F).
34
Mode d’emploi
À propos de votre nouveau thermostat
Votre nouveau thermostat est pré-programmé et prêt à fonctionner. Il suffit de régler
l’heure et le jour. Vérifiez ensuite les réglages ci-dessous et modifiez-les si besoin est :
1. Réglage de l’horloge .................................................................................Voir page 37
2. Sélection de la configuration du ventilateur : Pré-réglé sur Auto .....Voir page 38
3. Sélection du mode de fonctionnement : Pré-réglé sur Chauffage .....Voir page 39
4. Programme de régulation : Pré-réglages aux niveaux économie
d’énergie pendant vos heures de travail ou de sommeil (présumez
que vous vous levez à 6 h, partez à 8 h, rentrez à 18 h et vous
couchez à 22 h) ...............................................................................Voir les pages 40-43
5. Placez les commandes de humification, de
déshumidification et de ventilation, si c’est approprié ........Voir les pages 49-51
COMMANDE DE TEMPÉRATURE PAR TOUCHE UNIQUE : Vous pouvez annuler le
programme à n’importe quel moment et régler manuellement la température
(voir pages 42-43)
VisionPRO
®
IAQ
35
Aide-mémoire des commandes
Appuyez sur day (s) pour paramétrer le programme (voir page 41)
Appuyez sur day (s)
pour paramétrer le
programme (voir page 38)
Appuyez pour
sélectionner le type
de fonctionnement
(voir page 39)
Appuyez pour
paramétrer le pro-
gramme (voir page 41)
Appuyez pour modifier
le réglage de la tem-
pérature (voir pages
41-43)
Appuyez pour avoir
d’autres possibilités
Appuyez pour
annuler le pro-
gramme (voir
pages 42-43)
Appuyez pour
régler l’horloge
(voir page 37)
Appuyez pour verrouiller le
pavé numérique pendant 30
secondes afin de nettoyer
l’écran (voir page 46).
SCHED HOLD CLOCK SCREEN MORE
MON
TUE WED THU FRI SAT SUN
AM
FAN
AUTO
SYSTEM
HEAT
Following
Schedule
Inside
Set To
OK TO PICK MULTIPLE DAYS
70
6:01
70
36
Mode d’emploi
Aide-mémoire de laffichage d’état
Température intérieure actuelle Jour actuel de la semaine Réglage de la température
Programme en fonc-
tionnement (ne s’affiche
pas lorsqu’il n’est pas
en fonctionnement)
Adaptive Intelligent
Recovery (voir page 45)
Humidité (Si lon monte
un capteur extérieur,
la température extéri-
eure appart au lieu
du degd’humidité.
Appuyez sur MORE
pour afficher le deg
d’humidité.)
Réglage ventilation
Autres messages affichés :
Cool On : l’installation de climatisation est en marche
Heat On : l’installation de chauffage est en marche
Aux Heat On : Le système de chauffage auxiliaire est activé
Wait : La protection de compresseur a activé (voir page 45)
Screen Locked : Voir la page 58 pour ouvrir
SCHED HOLD CLOCK SCREEN MORE
WED
AM
FAN
AUTO
SYSTEM
HEAT
Following
Schedule
Inside
Set To
Recovery
Humidity
70
6:01
70
55
Réglage système
Heure actuelle
VisionPRO
®
IAQ
37
Réglage de l’horloge
Pour régler l’affichage de l’heure actuelle,
appuyez sur CLOCK, puis sur s ou t pour
modifier l’heure. Appuyez sur s ou t main-
tenant la pression pour avancer l’heure plus
rapidement.
Appuyez sur DONE pour sauvegarder et quit-
ter (ou appuyez sur CANCEL pour quitter sans
modifier l’heure).
Remarque : l’horloge temps réel ne devrait
jamais nécessiter de réglage puisqu’elle est
automatiquement mise à jour lors des changements
entre heure d’été et heure d’hiver et met en
mémoire tous les renseignements concernant la
date et l’heure.
Remarque : Pour modifier l’affichage du jour de la
semaine actuel, voir la page 53.
Appuyez sur CLOCK
Modifiez l’heure et appuyez sur DONE
SCHED HOLD CLOCK SCREEN MORE
WED
AM
FAN
AUTO
Inside
Set To
70
6:01
70
DONE CANCEL
WED
AM
FAN
AUTO
Inside
Set To
70
6:02
70
38
Mode d’emploi
Réglage du fonctionnement de la ventilation
Appuyez sur FAN pour sélectionner le
fonctionnement de la ventilation :
On : Le ventilateur est constamment en
marche.
Auto : Le ventilateur ne fonctionne que
lorsque la chauffage ou la climatisation
fonctionne.
Circ: Le ventilateur tourne de manière
aléatoire environ 35% du temps. Ce réglage
sert à améliorer la circulation de l’air ou à
épurer l’air plus efficacement si vous ne voulez
pas faire tourner le ventilateur en permanence.
Pour déroger aux réglages programmés pour le
ventilateur en fonction de chacune des périodes,
appuyer sur FAN (voir la page 41). Si le ventilateur
est glé à On ou Circ, le réglage sélectionné
restera en vigueur jusqu’à ce que l’utilisateur
appuie de nouveau sur FAN pour sélectionner
le mode de fonctionnement Auto, et revenir à
l’horaire programmé pour le ventilateur.
REMARQUE : Si un horaire est
programmé pour le ventilateur, le
ventilateur fonctionnera selon cet
horaire lorsqu’il est en mode « Auto ».
Appuyez sur FAN
SCHED HOLD CLOCK SCREEN MORE
WED
AM
SYSTEM
HEAT
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
VisionPRO
®
IAQ
39
Sélection du mode de fonctionnement
Appuyez sur SYSTEM
SCHED HOLD CLOCK SCREEN MORE
WED
AM
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
SYSTEM
HEAT
Appuyez sur SYSTEM pour sélectionner :
Heat: Le thermostat ne commande que
l’installation de chauffage.
Cool: Le thermostat ne commande que
l’installation de climatisation.
Off: Arrêt des installations de chauffage
et de climatisation.
Auto: Le thermostat sélectionne
automatiquement le chauffage ou
la climatisation en fonction de la
température intérieure.
Em Heat (uniquement pour les pompes
à chaleur à chauffage auxiliaire) : Le
thermostat commande le chauffage
auxiliaire. Le compresseur n’est pas
utilisé.
40
Mode d’emploi
Réglages EnergyStar
®
pour économiser au maximum
Il est facile de programmer votre système afin de réaliser un maximum d’économies
d’énergie. Vous pouvez programmer quatre plages horaires chaque jour, avec dif-
férents arrangements pour chaque jour.
Ce thermostat est préréglé pour utiliser les paramètres du programme Energy Star
®
.
Nous conseillons ces réglages car ils peuvent réduire vos dépenses de chauffage/
climatisation de jusqu’à 33%. (Voir la page suivante pour horaires et températures de
chaque plage.)
70
°
78
°
70
°
78
°
62
°
85
°
62
°
[ou annuler la période]
85
°
[ou annuler la période]
70
°
78
°
70
°
[ou annuler la période]
78
°
[ou annuler la période]
62
°
82
°
62
°
82
°
Lever (Wake)
(6:00)
Départ (Leave)
(8:00)
Retour (Return)
(18:00)
Sommeil (Sleep)
(22:00)
Refroidissement
(Lun-Ven)
Chauffage
(Lun-Ven)
Chauffage
(Sam-Dim)
Refroidissement
(Sam-Dim)
42
Mode d’emploi
Annulation de la programmation (momentanée)
Appuyez sur s ou t modifier immédiatement
la température. Cela annule momentanément le
réglage de température pour la plage actuelle.
La nouvelle température sera maintenue
jusqu’à l’heure fixée. Une fois le temps affiché
au minuteur écoulé, le programme reprend et
fixe la température au niveauprogrammé pour
la période actuelle.
Pour annuler le réglage temporaire à un
moment quelconque, appuyez sur CANCEL (ou
sur SCHED). Le programme reprendra.
Réglez la température
Appuyez pour régler le minuteur
Appuyez pour reprendre
l’e programme
VisionPRO
®
IAQ
43
Annulation du programme (permanente)
Appuyez HOLD Modifiez la température
Appuyez sur HOLD pour modifier la température
de manière permanente. Cela arrêtera le
programme.
Quelle que soit la température fixée, elle sera
conservée 24 heures sur 24 jusqu’à ce que
vous la modifiez à la main, ou appuyez sur
CANCEL (ou SCHED) pour annuler « Hold » et
reprendre le programme.
Appuyez pour reprendre
le programme
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honeywell VisionPRO_IAQ bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honeywell VisionPRO_IAQ in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 2,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info