16 69-0819
1. Press and hold PERIOD key until the desired time
period shows on the display.
2. Press and hold DAY key until the desired day
shows on the display.
3. Press and release the CANCEL PERIOD key to
cancel the time and temperature settings for that time
period. Both the heating and cooling temperatures will be
canceled.
You can use the copy function to cancel the program
from other days, but remember:
all
the programs will be
copied, not just the cancellation.
4. Press and release RUN PROGRAM key to return
to normal operation.
CHECKING THE PROGRAM TIMES AND
TEMPERATURES
You can check all the stored settings without affecting
the permanent program.
1. Press PERIOD key until the desired period shows
on the display. The start time and temperature setting will
appear on the display.
2. Press and release DAY key to display the next
daily time and temperature for that period.
3. Press and release RUN PROGRAM key to return
to normal operation.
CHECKING THE CURRENT TEMPERATURE SETTING
Press a single key to compare actual zone tempera-
ture to the setting at any time. Press and release the
PRESENT SETTING key. The display will show the
current temperature setting for several seconds, then
revert to the zone temperature.
With system switch in the AUTO position, press and
hold PRESENT SETTING key to alternate between
heating and cooling settings.
During recovery from energy savings, the setting
displayed will not match the programmed setting. This is
because the thermostat gradually changes the tempera-
ture setting during recovery to provide maximum comfort
combined with the most efficient use of the heating or
cooling equipment.
