22
69-1623
Cooling will not come on. (cont.) • The thermostat has a built-in time delay on cooling. To
prevent equipment damage, allow five to ten minutes after
changing
the setting before the air conditioner starts.
• If temperature setting is lower than the current tempera-
ture, and the display shows COOL, set the system control
to the OFF setting for ten minutes. After ten minutes,
return the system control to the COOL setting. If the air
conditioner comes on, the compressor may have reached
its high limit temperature protection and shut down. If the
air conditioner does not come on after ten minutes and the
display shows COOL, contact your utility.
The room is too warm or • Press Present Setting key to check the current tempera-
too cool. ture setting.
• If desired, change the temperature setting. See Operating
Your Thermostat section.
