14 69-1003—1
Fan Control
There are two fan settings: AUTO and ON.
Set the fan at the setting you want by pressing
the FAN key. Each time you press the key, the
fan status changes to the next setting.
When FAN is displayed, the fan is on
continuously. Use this setting for improved air
circulation during special occasions or for more
efficient electronic air cleaning.
When nothing is displayed, the fan is set to
come on with the heating or cooling equipment
as needed. AUTO is the normal setting for most
homes and allows a single-speed fan to turn on
automatically with the air conditioner or furnace.
If you have a two-speed fan, it usually runs on
high with the air conditioner and on low with the
furnace.
Step 4
—
Start the
Thermostat Program
To start the thermostat using the program you
have just entered, press the RUN PROGRAM
key.
NOTE: For information on energy savings,
refer to the maps in the Energy
Savings section.