12
69-1575
offset for rate 1 is displayed (note the indicator
on the thermostat display as shown in Fig. 1).
Use the Warmer and Cooler keys to set the
offset value. Repeat the procedure for each
rate. After you have entered the last offset
value, press the Run Program key.
Entering a Cooling Schedule
Press the System key until the thermostat
displays the word COOL to indicate you are in
the cooling mode.
Enter cooling temperatures for the WAKE,
LEAVE, RETURN and SLEEP times by
following the same instructions as for Entering
a Heating Schedule above. If you subscribe to
Time-of-Use Pricing, enter offset values for the
cooling season as you did for the heating
season.
Step 3—Set the System
and Fan Controls
After programming the thermostat, set the
system and fan controls as follows:
System Control
If you have a conventional heating/cooling
system, the system can be set to: HEAT, COOL
or OFF. If you have a heat pump system, the
system can be set to: HEAT, EM. HEAT, COOL
or OFF.