585432
9
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Particular features of HCW 82
9
3. Particular features of
HCW 82
3.1. Operation
The room setpoint temperature can be set easily at the
setpoint adjuster HCW 82 by means of an adjustment dial.
The adjustment range amounts to ± 12 °C, starting from the
basic value of 20 °C (in position 0).
Fig. 5: HCW 82
Select the desired change of the preset temperature at the
adjustment dial (1) (see Fig. 5)
(settings on the scale in °C).
3.2. Limiting the adjustment range
You can limit the setting range that can be used at the
adjustment dial.
Remove the housing cover (see Fig. 1, Page 7).
Fig. 6: Limiting the adjustment range
Place the two small pins into the holes of the adjustment
dials in order to limit the adjustment range (see Fig. 6).
Orientate yourself on the basis of the inner scale:
In Fig. 6, the pins are inserted so that the adjustment dial
can only be adjusted by ±3 °C around the zero point.
Turn the adjustment dial clockwise until it stops.
Check whether the adjustment dial is in the position shown
in Fig. 5.
If appropriate, put the adjustment back in, rotated by 180°
until it has the position shown.
Turn the adjustment dial to Position 0.
Place the housing cover in position above and snap it
down (see Fig. 4).
3.3. Operation with an external power
source
In addition to battery operation, the setpoint adjuster
HCW 82 is also prepared for operation with an external
power source.
WARNING
Damage to the device!
Use of an unsuitable power supply unit.
Use a power supply unit with 3 V DC
± 10%, min. 25 mA.
Keep the power supply unit de-
energised while connecting it.
Observe the connection diagram next
to the cable terminals.
Have a power supply unit with 3 V DC ± 10 %, min. 25 mA
at hand.
De-energise the power supply unit.
Remove the housing cover of the HCW 82 (see Fig. 1,
Page 7).
Remove the batteries.
Dispose of the batteries according to the
local statutory requirements and not with
the used domestic refuse.
Unscrew the setpoint adjuster HCW 82.
2
1
12 3
+ 3V
Fig. 7: Connection of the external power source (only HCW 82)
The maximum permissible cable length from the
power supply unit to the device amounts to
100 m. If possible, use a cable of the type JE-Y
(ST)Y 2x2x0.8 mm or JE-LIYCY 2x2x0.5 mm
2
.
Lead the outlet cable of the power supply unit through the
housing opening (1) (see Fig. 7) to the inside.
Connect the outlet cable to the terminal (2)
(see Fig. 7).
Connection 2: Earth
Connection 3: Voltage
Screw the setpoint adjuster HCW 82 back on.
Place the housing cover in position above and snap it
down (see Fig. 4).
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honeywell HCF 82 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honeywell HCF 82 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info