625281
4
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
4
ENGLISH
BEFORE OPERATION
Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.
Read and understand this manual. Know what the controls do and
how to operate them.
Familiarize yourself with the pump and its operation before you begin
using it. Know how to quickly shut off the engine in case of an
emergency.
Be familiar with any safety precautions that are needed to properly
pump the chemicals that are listed on page 5.
IS YOUR PUMP READY TO GO?
For your safety, and to maximize the service life of your equipment, it
is very important to take a few moments before you operate the pump
to check its condition. Be sure to take care of any problem you find, or
have your servicing dealer correct it, before you operate the pump.
Before beginning your pre-operation checks, be sure the pump is on a
level surface and the ignition switch is in the OFF position.
Check the General Condition of the Pump
Look around and underneath the pump for signs of oil or petrol
leaks.
Remove any dirt or debris, especially around the engine, muffler,
and recoil starter.
Look for signs of damage.
Check that all nuts, bolts, screws, hose connectors, and clamps are
tightened.
Keep all shields and covers in place while operating the pump.
Check the general condition of the hoses. Be sure the hoses are in
serviceable condition before connecting them to the pump.
Check The Following Items Before You Start The Engine
Check the oil level (page 8).
Check the air cleaner (page 9).
Check the fuel level (page 11). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
OPERATION
PUMP PREPARATION
Before operating the pump for the first time, please review
IMPORTANT SAFETY INFORMATION (page 2) and BEFORE
OPERATION (page 4).
For your safety, avoid starting or operating the engine in an enclosed
area, such as a garage. Your engine’s exhaust contains poisonous
carbon monoxide gas, which can collect rapidly in an enclosed area
and cause illness or death.
Suction Hose Connection
The suction hose [1] must be reinforced with a non-collapsible wall or
wire braided construction to prevent suction hose collapse. Keep the
pump as close to the liquid to be pumped as possible. Avoid bends
and sharp turns. Pump performance is best when the pump is not far
above the liquid level and the hose is kept straight. Self-priming time
is also proportional to the suction hose length. Using a longer suction
hose will increase the self priming time.
The strainer [2] provided with the pump should be attached to the end
of the suction hose with a hose clamp as shown.
Always install the strainer on the end of the suction hose before
pumping. The strainer will prevent debris from entering the pump that
can cause clogging and impeller or other pump damage.
Discharge Hose Connection
A short, large diameter hose will provide lower fluid friction and
improve pump efficiency. A long or small diameter hose increases
fluid friction and reduces pump output.
Tighten the hose clamp to prevent the hose from disconnecting under
high pressure.
B WARNING
Improperly maintaining this pump, or failing to correct a
problem before operation, could cause a malfunction in which
you could be seriously injured.
Always perform a pre-operation inspection before each
operation, and correct any problem.
[1]
[2]
WMP20XE.book Page 4 Thursday, August 28, 2008 2:43 PM
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honda WMP20XE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honda WMP20XE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 10,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info