478012
9
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
9 EN
Both sides of 3-tooth and 4-tooth blades can be used.
When one side is worn, the cutting attachment should be turned
over to use the cutting edges on the other side.
Only the bevelled edges of the teeth are to be sharpened.
It is important to keep their profile regular and to avoid incipient
fractures.
All the teeth must be sharpened in the same way.
NOTE:
If the machine vibrates abnormally after sharpening, this
indicates that the blade is unbalanced. In this case, contact your
authorized dealer Honda to have it checked.
CAUTION:
Replace the blade when the wear limit shown in the illustrations
below has been reached.
[A] Unsatisfactory
[1] Incipient fracture
[2] Limit exceeded and
tooth profile irregular
[3] Angles incorrect and unequal
[4] Unsatisfactory cutting profile
[B] Satisfactory
[5] Sharpening limit
SHARPENING CIRCULAR SAW BLADE
A circular saw blade can be
sharpened using a file [6] if it is
only slightly worn. It is very
important to keep the correct
tooth profile, as well as cutting
angles and tooth pitch [3].
If a more extensive sharpening is
required, contact your authorised
Honda dealer who has acccess
to suitable specialist sharpening
equipment.
ADJUSTING THE CARBURETTOR
PROCEDURE
Start the engine and let it warm up to normal operating temperature.
Then turn the idle screw [7] to the right or left to obtain the correct
setting.
NOTE:
When the engine is idling, the cutting attachment must not
rotate.
CHECKING THE SPARK PLUG
1. To reach the spark plug [8],
the top cover must be
removed from the
engine [9]. Use the
hexagonal wrench supplied
to undo the bolt [10].
NOTE:
Hot parts and moving
parts (flywheel) are exposed
when the engine top cover is
removed. Never use your
brush cutter with the engine
cover removed.
2. Remove the cap and
unscrew the spark plug
using the wrench supplied.
3. Clean the electrodes with a wire brush [11] to remove carbon
deposits.
4. If the electrodes show signs of wear, replace the spark plug with
a new one with the same characteristics.
5. Check the spark plug gap with
feeler gauges [12]. When
adjustment is required,
carefully bend the side
electrode.
6. Reinstall the spark plug and
screw it finger-tight onto its
seat.
7. For new spark plugs, tighten
by an additional 1/2 turn with
the spark plug wrench.When
the same spark plus is
installed, 1/8 to 1/4 of a turn is
enough.
CAUTION:
If a spark plug is insufficiently tightened, it is liable to heat up and
damage the engine. If the spark plug is overtightened or cross-
threaded, irreparable damage could be caused to the engine
block.
[2]
[1]
[3]
[4]
[A]
30 mm
[5]
[B]
30°
30°
30°
30°
SAFETY
D2 D3
1 mm
1 mm
[6]
[3]
UMK425E1 UMK435E1
Idle speed 3 100 ± 200 rpm.
[7]
SAFETY
B7 C1
[9]
[10]
[8]
0,6-0,7 mm
[11]
[12]
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Honda-UMK425E

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honda UMK425E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honda UMK425E in de taal/talen: Engels als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Honda UMK425E

Honda UMK425E Gebruiksaanwijzing - Nederlands - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - Nederlands - 18 pagina's

Honda UMK425E Gebruiksaanwijzing - Deutsch - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - Deutsch - 58 pagina's

Honda UMK425E Gebruiksaanwijzing - Deutsch - 18 pagina's

Honda UMK425E Gebruiksaanwijzing - English - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - English - 58 pagina's

Honda UMK425E Gebruiksaanwijzing - Français - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - Français - 58 pagina's

Honda UMK425E Gebruiksaanwijzing - Italiano, Espanõl - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info