79
Flooded Engine
If the engine fails to start after repeated
attempts, it may be flooded.
1. Leave the engine stop switch set to
(RUN).
2. Open throttle fully.
3. Press the start button for 5 seconds.
4. Follow the normal starting procedure.
If the engine starts with unstable idle, open
the throttle slightly.
If the engine does not start, wait for 10
seconds, then follow steps 1-4 again.
Ignition Cut Off
Your motorcycle is designed to automatically
stop the engine and fuel pump if the
motorcycle is over-turned (a banking sensor
cuts off the ignition system). Before restarting
the engine, you must turn the ignition switch
to the OFF position and then back to ON.