5.3.3 FILLING WITH OIL AND FUEL
Use oil SAE 10W30 and Petrol Unleaded Euro 95.
Running the engine with an
insufficient amount of oil can damage it very seri-
ously. The use of a non-detergent or two-stroke
engine oil can reduce the life of the engine.
On a flat surface and with the engine off, remove
the cap with the dipstick and dry it. Push it fully in
without screwing it on, then take it out and check
the oil level. If the level is close to or below the
lower limit (MIN) of the dipstick, top up with the recommended oil until the upper
limit (MAX) is reached. Screw the dipstick cap back on.
Refuel using a funnel. Avoid overfilling; filler neck
has a max level indication.
The tank's capacity is about 6.2 litres.
In the event of spilling on the
body, quickly remove perol traces.
Refuelling should be car-
ried out in an open or well ventilated area
with engine stopped. Always remember
that petrol fumes are inflammable. DO NOT
TAKE A NAKED FLAME TO THE TANK’S
OPENING IN ORDER TO SEE THE TANK’S
CONTENTS AND DO NOT SMOKE WHEN
REFUELLING.
5.3.4 C
HECKING THE BRAKING SYSTEM
Make sure that the machine’s braking capacity is adequate for the conditions of
usage. Avoid starting the machine if you have doubts on the brake efficiency.
If necessary, adjust the brake (☛ 6.3.4). If you still have doubts about its efficien-
cy, contact your Dealer.
̆
!
DANGER!
NOTE
IMPORTANT
IMPORTANT
EN 25HOW TO USE
