625322
10
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
10
ENGLISH
Air Filter Cleaning
A dirty air filter will restrict air flow to the carburetor, reducing engine
performance. If you operate the tiller in very dusty areas, clean the air
filter more often than specified in the MAINTENANCE SCHEDULE
(page 8).
1. Remove the air filter.
2. Clean the air filter in warm soapy
water [1], rinse, and allow it to dry
thoroughly [2]. Or, clean in
nonflammable solvent and allow it
to dry.
3. Dip the air filter in clean engine oil
[3], and then squeeze out all excess
oil [4]. The engine will be hard to
start or will smoke when started if
too much oil is left in the air filter.
NOTICE
Operating the engine with a dry air
filter will allow dust to enter, causing
engine damage. The air filter must
be oiled after cleaning.
4. Wipe dirt from the air cleaner base
and cover using a moist rag. Be
careful to prevent dirt from entering
the carburetor.
5. Reinstall the air filter and air filter
cover.
Spark Plug Service
Recommended Spark Plug: NGK - CMR5H
NOTICE
An incorrect spark plug can cause engine damage.
1. Use a 4 mm Allen
wrench to loosen the
5 mm hex bolt [1],
and remove the fan
cover [2].
2. Disconnect the spark
plug cap [3], and
remove any dirt from
around the spark
plug area.
3. Remove the spark
plug [4] with a
5/8-inch spark plug
wrench.
4. Inspect the spark plug.
Replace it if the electrodes
are worn, or if the insulator
is cracked or chipped.
5. Measure the spark plug
electrode gap with a
suitable gauge.
GAP: 0.60 ~ 0.70 mm
Correct the gap, if
necessary, by carefully
bending the side
electrode.
6. Install the spark plug
carefully, by hand, to avoid
cross-threading.
7. After the spark plug seats,
tighten with a 5/8-inch spark
plug wrench to compress
the washer [5].
If reinstalling the used spark
plug, tighten 1/8 ~ 1/4 turn
after the spark plug seats.
If installing a new spark plug,
tighten 1/2 turn after the
spark plug seats.
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
8. Attach the spark plug cap [3].
9. Install the fan cover [2] and 5 mm hex bolt [1] and tighten securely.
Cooling Fin Inspection
Inspect the engine
cooling fins [1]. You
should clean out any dirt
and debris if air is
obstructed from flowing
across the cooling fins.
1. Loosen the 5 mm hex
bolt, and then
remove the fan cover.
2. Remove all dirt and
debris from the
cooling fins.
3. Install the fan cover, and tighten the 5 mm hex bolt securely.
[4]
[3]
[2]
[1]
[1]
[2]
[4]
[3]
[5]
0.60 ~ 0.70 mm
[1]
FG110 EU.book Page 10 Thursday, January 22, 2009 8:14 AM
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honda FG110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honda FG110 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Honda FG110

Honda FG110 Gebruiksaanwijzing - Nederlands - 18 pagina's

Honda FG110 Gebruiksaanwijzing - Deutsch - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info