3 I GB
INSTRUCTIONS FOR USE
Before first use
Charge your Compact LED Charging Mirror fully.
Charging the mirror
1. Plug the micro-USB cable into the input port.
2. Plug the USB end of the cable into a USB power adaptor
(not included) or the USB port of a computer.
3. The battery indicator LED will flash to show the mirror
is being charged. When the mirror is fully charged the
battery indicator LED will stop flashing.
To check the amount of charge
1. Disconnect from any devices
2. Briefly press the power button
Flashing LED = low charge
Solid LED = well charged
Charging your device
1. Plug the USB end of your devices charging cable into
the output port.
2. Plug the other end of the cable into your device.
3. The battery indicator LED on the mirror will light to
show that your device is charging. If the LED does not
light this means your device is not compatible and will
not be charged (eg ear buds, activity trackers).
NOTE:The Compact LED Charging Mirror is only
compatible with devices that support 5V (2A max)
charging.
Using the led mirror
The mirror LED’s can be turned on and off by pressing and
holding the power button.
MAINTENANCE
Cleaning
• Clean the mirror using a damp cloth, and dry
thoroughly before using.
• Clean the mirror only with a commercial glass cleaner
or water.
• DO NOT submerge the mirror or use excessive water
while cleaning.
• Never use abrasive cleaners, brushes, glass / furniture
polish, paint thinner etc. to clean.
Storage
Make sure the mirror is switched to the OFF position and
closed. Store in a safe, dry, cool place. NEVER leave the
mirror in a position where it can reflect sunlight; reflected
sunlight can cause fire.
PRODUCT FEATURES
USB output port
Micro-USB input port
Battery
indicator LED
Power button
