5
GB
INSTRUCTIONS FOR USE
1. For first use, clip open the battery compartment cover from the back of the mirror and
pull out the isolator tab.
2. To open the mirror, gently pull the two halves apart on the side furthest away from the
hinge.
3. Push the switch button on the side of the mirror to the ON position, this will illuminate
the LED lights.
4. Once finished with the mirror, push the switch to the OFF position and close the mirror.
INSERTING THE BATTERIES
1. Clip open the battery compartment cover on the back of the mirror.
2. Insert 2x CR2032 batteries as directed on the inside of the compartment (please note to
pay attention to the correct +/- polarities)
3. Replace battery compartment cover and click into place.
MAINTENANCE
Cleaning
• Clean the mirror using a damp cloth, and dry thoroughly before using.
• Clean the mirror only with a commercial glass cleaner or water.
• DO NOT submerge the mirror or use excessive water while cleaning.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc. to clean.
Storage
Make sure the mirror is switched to the OFF position and closed. Store in a safe, dry, cool
place. NEVER leave the mirror in a position where it can reflect sunlight; reflected sunlight
can cause fire.