5
GB
INSTRUCTIONS FOR USE
1. Ensure that the unit is unplugged before filling with water. Fill with warm water to the MAX fill line located
on the inside of the tub.
NOTE: The water heater will only help to maintain the temperature between 40-45 degrees. It will not
heat cold water. For a warm water massage, fill the unit with warm water.
2. Place the unit on the floor in front of a chair. It is recommended to place the product on a towel.
3. Plug the unit into a 220-240 AC power supply.
4. Sit down and place your feet in the spa.
5. To operate the unit:
to activate vibration massage, press
to activate Bubble Massage + Keep Warm, press
Vibration and Bubble massage settings can be used separately or at the same time. N.B. The keep warm
function is automatically activated when the bubbles are switched on. The vibration massage can be
used with or without water. The bubble massage + keep warm must only be used with water.
6. To activate the water heater press the indicator light will show. The water heater will heat the water to
maintain the temperature between 40-45°C. To deactivate the water heater press the button again.
N.B. When filling the footspa use warm water, the heater is not designed to heat the water from cold.
Perception of temperature is individual: If the water feels uncomfortably hot, turn off the heater and
allow to cool.
7. Enjoy a deep massage by sliding feet back and forth over the stimulating nodes and rollers on the footspa
floor. The fixing bracket from one side will come away with the roller, take care not to lose this. To
reassemble: 1. Insert the free end of the roller into the fixed bracket. 2 Carefully clip the other end, with the
bracket attached, back into place.
8. Move your foot over the exfoliating pumice stone to smooth the skin. To change between the coarse and
fine stone simple lift the attachment and replace.
9. To turn off, press the buttons again to deactivate.
10. To empty: First, unplug the unit. Tip the unit, allowing water to pour out along the drain spout (see fig.3).
DO NOT pour water over the control panel.
MAINTENANCE:
Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only with a soft, slightly damp sponge.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place. To avoid breakage, DO NOT wrap the power cord
around the appliance. DO NOT hang the unit by the cord.
