1. Lay the remote control face-down on a table and hold it down with your left hand.
2. Insert the thumbnail of your right hand into the Release Tab, and your index fingernail into the Pull-
Groove.
3. With your thumbnail, squeeze the Release Tab inwards whilst at the same time sliding the battery
holder out with your index fingernail.
CLEANING AND MAINTENANCE
Caution:
• Always switch off and unplug the unit before removing the filters or performing any cleaning.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of
the plastic components.
MAIN BODY
1. Use a soft duster or a rag to dust off all the surfaces.
2. Clean the Air Inlet and Air Outlet using a vacuum cleaner regularly.
3. Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy water.
Caution: Ensure that water doesn’t get inside the unit.
4. Use a dry cloth to thoroughly dry the unit before turning on.
AIR INLET COVER AND INNER FILTER
1. Use a screwdriver to unscrew the two cover screws.
2. Remove the Air Inlet Cover and wipe clean, or clean using a vacuum cleaner.
3. Use a duster to gently dust off the Inner Filter.
4. Replace the Inner Filter and Air Inlet Cover and tighten the screws to fix it in position.
