30182
5
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
Transmitter Input Buttons
Optic Controls and Switch Assignments
Receiver - Servo Connection List
Transmitter Displays and Messages
Factory Repair Service Information
Please read the warranty card supplied with your system and
return it. Before you decide to have your system repaired, if
there is no apparent physical damage, read this instruction
manual again and check to be sure that you are operating the
system as it was designed to be operated. If you are still
having trouble, pack up your system in its original shipping
materials and send it to the nearest authorized Hitec R/C
Service Center.
Be sure to include a note in your package that describes the
trouble in as much detail as possible, including:
- Symptoms of the problem in as much detail as you can
provide, including any unusual mounting conditions or
equipment orientation
- A list of items you are sending, and what you want to be
repaired.
- Your name, address, and telephone number.
The buttons are used for different things as follows:
1. The Edit buttons allow you to move up and down within the
model menus, and move within the regular display.
2. The Cursor Left/Right buttons allow you to select options
within a particular function, and control the timer function.
3. The Data +Increase & -Decrease buttons allow you to
increase or decrease the numerical settings for a function
4. The Clear Active/Inhibit button resets numbers, and turns
functions on and off.
5. The Lock button holds the throttle channel fixed while other
channels still respond to the transmitter.
You'll learn how to use these buttons in the setup sections that follow.
When you first turn on your transmitter, the first screen shown
below appears on the LCD display. Before flying, or even
starting the engine, BE SURE that the model number
appearing in the upper right of the display matches the
model that you are about to fly! If you don't, reversed
servos and incorrect trims will lead to an immediate crash.
You can scroll up and down through the startup screen by
pressing one of the two Edit keys (the two keys on the far left).
If you press timer or engine cut or lock keys, you go directly to
those functions regardless of the display.
The table below shows the hookups that should be used for each of the model types. Note that some functions shown will not
operate until they are activated in the transmitter.
The servo response varies with the selected function. Standard options are shown first.
Web site: http://www.hitecrcd.com
Hitec-RCD, Inc.
12115 Paine St.
Poway, CA 92064
Telephone: 1-858-748-6948
FAX 1-858-748-1767
This figure shows the assignments for a Mode 2 system as supplied by the factory in North America.
Note that some of the functions will not operate until activated in the mixing menus.
Receiver
channel
1
2
3
4
5
6
Aircraft Glider
(ACGL)
Aileron
or Right flaperon (FLPN on)
or Right elevon (ELVN on)
or Right aileron (ADIF on)
Elevator
or V-tail right side (VTAL on)
or Left Elevon (ELVN on)
or Right elevator (AILV on)
Throttle (controlled by throttle stick or Switch 01)
Rudder or
V-tail left side (VTAL on)
Landing gear (controlled by Gear/Aux switch)
or Left aileron (ADIF on)
or Left elevator (AILV on)
Flap (travel controlled by VR-L and neutral set by VR-R)
or Left flaperon (FLPN on)
Helicopter
(HELI)
Aileron (or Roll Cyclic)
or Swash servo 1 (120')
Elevator (or Pitch Cyclic)
or Swash servo 2 (120')
Throttle
Rudder
(Or Yaw control through the gyro)
Gyro sensitivity
(values set in GYRO menu)
Pitch (or Collective)
or Swash servo 3 (120')
Voltage/Timer Display
Normal Display Mode
Timer Display
Trim Menu [TRIM]
Model Name Display Throttle Lock
+ DATA key
-DATAkey
Edit keys
Edit keys
Lock key
Transmitter Input Buttons, Receiver - Servo Connection List, Receiver - Servo Connection List - Page 9Factory Repair Service Information, Optic Controls and Switch Assignments - Page 8
1
2
2
13
5
4
3
Trainer Switch
Engine Cut
Switch
SW 3
Aileron Dual
Rate Switch
Right Lever
SW 1
Elevator-Rudder
Dual Rate Switch
Left Lever
Rudder -
Throttle Stick
Aileron &
Elevator Stick
Throttle
Trim Switch
Elevator
Trim Switch
Rudder
Trim Switch
Aileron
Trim Switch
Power Switch
SW 2
Gear or
Auxiliary Switch
SW 4
Flight Mode
Switch
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitec OPTIC_6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitec OPTIC_6 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Hitec OPTIC_6

Hitec OPTIC_6 Gebruiksaanwijzing - Français - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info